User's Manual

B ASIC C ONFIGURATION
3-19
Web – Click System, Bridge Extension.
Figure 3-5 Displaying Bridge Extension Configuration
CLI – Enter the following command.
Setting the IP Address
An IP address may be used for management access to the switch over your
network. By default, the switch uses DHCP to assign IP settings to VLAN
1 on the switch. If you wish to manually configure IP settings, you need to
set an IP address and subnet mask that is compatible with your network.
You may also need to establish a default gateway between the switch and
management stations that exist on another network segment.
Console#show bridge-ext 4-249
Max support VLAN numbers: 255
Max support VLAN ID: 4093
Extended multicast filtering services: No
Static entry individual port: Yes
VLAN learning: IVL
Configurable PVID tagging: Yes
Local VLAN capable: No
Traffic classes: Enabled
Global GVRP status: Enabled
GMRP: Disabled
Console#