User's Manual

B ASIC C ONFIGURATION
3-27
- file to startup-config - Copies a file in the switch to the startup
configuration.
- file to tftp - Copies a file from the switch to a TFTP server.
- running-config to file - Copies the running configuration to a file.
- running-config to startup-config - Copies the running config to the
startup config.
- running-config to tftp - Copies the running configuration to a TFTP
server.
- startup-config to file - Copies the startup configuration to a file on the
switch.
- startup-config to running-config - Copies the startup config to the
running config.
- startup-config to tftp - Copies the startup configuration to a TFTP
server.
- tftp to file - Copies a file from a TFTP server to the switch.
- tftp to running-config - Copies a file from a TFTP server to the
running config.
- tftp to startup-config - Copies a file from a TFTP server to the startup
config.
- file to unit - Copies a file from this switch to another unit in the stack.
- unit to file - Copies a file from another unit in the stack to this switch
• TFTP Server IP Address – The IP address of a TFTP server.
• File Type – Specify config (configuration) to copy configuration
settings, or PD_Controller to copy a PoE controller file.
• File Name – The file name should not contain slashes (\ or /), the
leading letter of the file name should not be a period (.), and the
maximum length for file names on the TFTP server is 127 characters or
31 characters for files on the switch. (Valid characters: A-Z, a-z, 0-9, “.”,
“-”, “_”)
• Source/Destination Unit – Stack unit. (Range: 1 - 8)
Note: Due to the size limit of the flash memory, the switch supports only
three configuration files (including the factory defaults file).