User manual

Setup

[Is proxy present?]

Select [No] and press [OK] on your Remote Control to continue.

(Note: The majority of home networks use a standard

Broadband

Router to share internet access. In this configuration, there

is no proxy

present.) Some corporate networks may have proxies in place for

advanced security. To configure this setting, simply obtain the proxy

IP address and port from your Network Administrator and then input

this data via your Remote Control.

You have now completed the initial configuration. You will be asked to

confirm the changes by pressing [OK] to continue. The SMCWMR-AG

will reset and automatically connect to your network upon boot-up.

Once the SMCWMR-AG is connected, it will ask you to [Register Now].

This will give you the option to upgrade your firmware via Smart Box

Management to take advantage of new updates.

(Note: You can register at any point by going to the [Settings] menu.)

Configuration via Web User Interface

In addition to the TV User Interface, there is also a Web User Interface made

available for quick and easy configuration from a networked PC.

Step 1: Verify the IP Address of the SMCWMR-AG.

a) If you have a DHCP server on your network, such as a broadband

router, you can log into your router and view the DHCP Client Log.

This will show which IP Address the router has given to the

SMCWMR-AG. Record this IP address.

b) You can also go to the [General] tab of your Media Server software

and click the [Search for MediaLink] button. Then the complete URL

of the Web User Interface will be displayed.

Step 2

f your SMCWMR-AG is connected to the network using the default

settings, the URL will be http://192.168.2.45/conf.shtml. Open your Web

browser and type the URL in the [Address] bar.