User manual

33
TROUBLESHOOTING
o If you are using an Ethernet cable to plug the SMCWMR-AG into
the network, verify that there is a link light on your network hub
or switch.
o If you are connecting the SMCWMR-AG with a wireless Access
Point or Router, verify that the network settings are correct. By
default the SSID is [SMC], encryption is [Disabled] and the mode
is [Infrastructure] on the SMCWMR-AG.
o Verify that the SMCWMR-AG has a wireless link. Go to the
[Settings] menu, click [Device Management] and click [Link
Quality].
o
If you have more than one network adapter in your host PC, verify
that the MediaServer software is enabled to operate on the same
network as the SMCWMR-AG. To do this, go to the
[ Network
Connection] tab of the MediaServer. Make sure the correct
address is shown in the
[ IP Address ] column relative to your
network adapter. Then click on the appropriate connection.
(Note: If you are enabling the MediaServer on a different
connection, you will be asked to restart it. Press [Yes].)
The SMCWMR-AG EZ-Stream™ Universal Wireless Multimedia
is not detecting the host PC.