- SMC TigerSwitch 10/100/1000 Gigabit Ethernet Switch Management Guide

C OMMAND L INE I NTERFACE
3-32
Command Mode
Global Configuration
Example
Related Commands
ip http port (3-31)
ip http secure-server
Use this command to enable the secure hypertext transfer protocol
(HTTPS) over the Secure Socket Layer (SSL), providing secure access (i.e.,
an encrypted connection) to the switch’s Web interface. Use the no form
to disable this function.
Syntax
ip http secure-server
no ip http secure-server
Default Setting
Enabled
Command Mode
Global Configuration
Command Usage
• Both HTTP and HTTPS service can be enabled independently.
• If you enable HTTPS, you must indicate this in the URL:
https://device[port_number]
• When you start HTTPS, the connection is established in this way:
- The client authenticates the server using the server’s digital
certificate.
- The client and server negotiate a set of security protocols to use
Console(config)#ip http server
Console(config)#