User's Manual

Chapter 8 | Status Information
WDS Status
– 104 –
WDS Status
The WDS Status window shows the WDS information for the 2.4 GHz and 5 GHz
radio interfaces.
Figure 58: WDS Status
The following items are displayed on this page:
◆ Auto Refresh Setting — Enables the automatic refresh of WDS status
information. When enabled, you can also set the time interval between each
status refresh.
◆ WDS-STA Status — The status of other APs in WDS-STA mode connected to
the AP interfaces.
■
Station Address — The MAC address of the AP client.
■
RSSI — The Receive Signal Strength Indicator of the received signal sent
from the peer WDS client.
■
Remote RSSI — The Receive Signal Strength Indicator of the AP signal
received by the peer WDS-STA client.
■
TxRate (Mbps) — The data tranmit rate to the AP client.