User's Manual

Chapter 11 | System Management Commands
– 122 –
Default Setting
SMC
Command Mode
Global Configuration
Example
AP(config)#prompt RD2
RD2(config)#
system name This command specifies or modifies the system name for this device.
Syntax
system name <name>
name - The name of this host.
(Maximum length: 32 characters)
Default Setting
WAP5110
Command Mode
Global Configuration
Example
AP(config)#system name AP
AP(config)#
system-resource This command sets CPU and memory rising and falling thresholds that monitor
system resources.
Syntax
system-resource threshold <cpu-rising> <cpu-falling> <memory-rising>
<memory-falling> <interval>
threshold - Keyword that sets CPU and memory threshold values.
cpu-rising - The CPU utilization rising threshold as a percentage.
(Range: 1-100 percent, 0 is disabled)
cpu-falling - The CPU utilization falling threshold as a percentage.
(Range: 0 to less than the CPU rising threshold)
memory-rising - The memory utilization rising threshold in Kbytes.
(Range: 1-113076 Kbytes, 0 is disabled)