User's Manual

Chapter 11 | System Management Commands
– 127 –
Command Mode
Global Configuration
Example
AP(config)# apmgmtui http server
AP(config)#
Related Commands
apmgmtui http port
apmgmtui http
session-timeout
This command sets the web browser timeout limit.
Syntax
apmgmtui http session-timeout <seconds>
seconds - The web session timeout. (Range: 0-1800 seconds, 0 means
disabled)
Default Setting
1800 seconds
Command Mode
Global Configuration
Example
AP(config)# apmgmtui http session-timeout 0
AP(config)#
Related Commands
apmgmtui http server
apmgmtui https port Use this command to specify the UDP port number used for HTTPS/SSL connection
to the access point’s web interface. Use the no form to restore the default port.
Syntax
apmgmtui https port <port_number>
no apmgmtui https port
port_number – The UDP port used for HTTPS/SSL.
(Range: 443, 1024-65535)
Default Setting
443