User's Manual

Chapter 11 | System Management Commands
– 131 –
Example
AP#show system
System Information
==============================================================
Serial Number : AC25123456
System Up time : 1 min
System Name : WAP5110
System Location : where?
System Contact : who?
System Country Code : TW - Taiwan
MAC Address : 70:72:CF:00:11:70
Radio 0 MAC Address : 70:72:CF:00:11:70
Radio 1 MAC Address : 70:72:CF:00:11:80
IP Address : 192.168.2.10
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.2.254
Management IP : 192.168.1.10
Management Subnet : 255.255.255.0
IPv6 Address : 2001:db8::1
IPv6 Subnet Mask : 64
IPv6 Gateway : 2001:db8::2
VLAN Status : Disable
Management VLAN ID(AP): 4093
Native VLAN ID(AP) : 1
DHCP Client : static
HTTP Access : Enable
HTTP Port : 80
HTTP Timeout : 1800
HTTPs Access : Enable
HTTPs Port : 443
SSH Access : Enable
SSH Port : 22
Telnet Access : Enable
Telnet Port : 23
Slot Status : Dual band(a/g)
Boot Rom Version : U-Boot 1.1.4 r1.4
Software Version : 0.3.3.4
Hardware Version : R0b
Part Number :
Production Date : 2012/06/01
User Name : admin
Reboot scheduling : disable
==============================================================
AP#
show system resource This command displays CPU and memory usage information for the system.
Command Mode
Exec
Example
AP#show system resource
=============== CPU =========================================
user (%) 0.00
nice (%) 0.00
system (%) 7.92