User's Manual

Chapter 13 | System Clock Commands
– 145 –
Example
AP(config)#sntp-server ip 1 10.1.0.19
AP#
Related Commands
sntp-server enabled
show sntp
sntp-server enabled This command enables SNTP client requests for time synchronization with NTP or
SNTP time servers specified by the sntp-server ip command. Use the no form to
disable SNTP client requests.
Syntax
[no] sntp-server enabled
Default Setting
Enabled
Command Mode
Global Configuration
Command Usage
The time acquired from time servers is used to record accurate dates and times for
log events. Without SNTP, the access point only records the time starting from the
factory default set at the last bootup (i.e., 00:14:00, January 1, 1970).
Example
AP(config)#sntp-server enabled
AP(config)#
Related Commands
sntp-server ip
show sntp
sntp-server date-time This command sets the system clock.
Syntax
sntp-server <year> <month> <day> <hour> <minute>
year - Sets the year. (Range: 1970-2100)
month - Sets the month. (Range: 1-12)
day - Sets the day. (Range: 1-31)