User's Manual

Chapter 15 | SNMP Commands
– 152 –
snmp-server
community
This command defines the community access string for the Simple Network
Management Protocol. Use the no form to remove the specified community string.
Syntax
snmp-server community string [ro | rw]
no snmp-server community string
string - Community string that acts like a password and permits access to
the SNMP protocol. (Maximum length: 23 characters, case sensitive)
ro - Specifies read-only access. Authorized management stations are only
able to retrieve MIB objects.
rw - Specifies read/write access. Authorized management stations are able
to both retrieve and modify MIB objects.
Default Setting
◆ public - Read-only access. Authorized management stations are only able to
retrieve MIB objects.
◆ private - Read/write access. Authorized management stations are able to both
retrieve and modify MIB objects.
Command Mode
Global Configuration
Command Usage
If you enter a community string without the ro or rw option, the default is read
only.
Example
AP(config)#snmp-server community alpha rw
AP(config)#
snmp-server contact This command sets the system contact string. Use the no form to remove the
system contact information.
Syntax
snmp-server contact string
no snmp-server contact
string - String that describes the system contact. (Maximum length: 255
characters)
Default Setting
None