User's Manual

– 167 –
17 RADIUS Client Commands
Remote Authentication Dial-in User Service (RADIUS) is a logon authentication
protocol that uses software running on a central server to control access for
RADIUS-aware devices to the network. An authentication server contains a
database of credentials, such as users names and passwords, for each wireless
client that requires access to the access point.
radius-server enable This command enables the RADIUS server.
Syntax
radius-server {primary | secondary} enable
primary - Specifies the primary RADIUS server.
secondary - Specifies the secondary RADIUS server.
Default Setting
Enabled
Table 13: RADIUS Client Commands
Command Function Mode Page
radius-server enable Enables the RADIUS server. GC
167
radius-server address Specifies the RADIUS server GC
168
radius-server port Sets the RADIUS server network port GC
168
radius-server key Sets the RADIUS encryption key GC
169
radius-server accounting
address
Sets the RADIUS server accounting address GC
169
radius-server accounting
port
Sets the RADIUS server accounting port GC
170
radius-server accounting
key
Sets the RADIUS server accounting key GC
170
radius-server accounting
timeout-interim
Sets the interval between transmitting accounting
updates to the RADIUS server
GC
171
make-radius-effective Implements RADIUS command changes made in
current CLI session.
GC
171
show radius Shows the current RADIUS settings Exec
172