User's Manual

Chapter 17 | RADIUS Client Commands
– 170 –
Command Usage
When the RADIUS Accounting server UDP address is specified, a RADIUS
accounting session is automatically started for each user that is successfully
authenticated to the access point.
Example
AP(config)# radius-server accounting address 192.168.1.19
This setting has not been effective !
If want to take effect, please execute make-radius-effective command !
AP(config)#
radius-server
accounting port
This command sets the RADIUS Accounting port.
Syntax
radius-server accounting port <port>
port - The port used by the RADIUS Accounting server.
(Range: 1024~65535)
Default Setting
1813
Command Mode
Global Configuration
Command Usage
When the RADIUS Accounting server UDP port is specified, a RADIUS accounting
session is automatically started for each user that is successfully authenticated to
the access point.
Example
AP(config)# radius-server accounting port 1882
This setting has not been effective !
If want to take effect, please execute make-radius-effective command !
AP(config)#
radius-server
accounting key
This command sets the RADIUS Accounting key.
Syntax
radius-server accounting key <key>
key - The RADIUS Accounting server keyphrase.