User's Manual

Chapter 17 | RADIUS Client Commands
– 171 –
Default Setting
DEFAULT
Command Mode
Global Configuration
Example
AP(config)# radius-server accounting key green
This setting has not been effective !
If want to take effect, please execute make-radius-effective command !
AP(config)#
radius-server
accounting
timeout-interim
This command sets the interval between transmitting accounting updates to the
RADIUS server.
Syntax
radius-server accounting timeout-interim <number_of_seconds>}
number_of_seconds - Number of seconds the access point waits between
transmitting accounting updates. (Range: 60-86400)
Default Setting
300
Command Mode
Global Configuration
Command Usage
The access point sends periodic accounting updates after every interim period until
the user logs off and a “stop” message is sent.
Example
AP(config)# radius-server accounting timeout-interim 600
This setting has not been effective !
If want to take effect, please execute make-radius-effective command !
AP(config)#
make-radius-effective This command implements the RADIUS settings made in the current CLI session.
Default Setting
None