User's Manual

Chapter 20 | Filtering Commands
– 180 –
Command Mode
Global Configuration
Command Usage
This command can disable wireless-to-wireless communications between clients
via the access point. However, it does not affect communications between wireless
clients and the wired network.
Example
AP(config)#filter local-bridge all-vap
AP(config)#
filter restrict-
management
This command prevents wireless clients from accessing the management interface
on the access point. Use the no form to disable this filtering.
Syntax
[no] filter restrict-management
Default
Disabled
Command Mode
Global Configuration
Example
AP(config)#filter restrict-management
AP(config)#
filter dhcp This command prevents the AP or wireless clients from obtaining an IP address
from a DHCP server installed on wireless client.
Syntax
filter dhcp <enable | disable>
enable - Prevent DHCP IP assignment from a wireless client.
disable - Allow DHCP IP assignment from a wireless client.
Default
Disabled
Command Mode
Global Configuration