User's Manual

Chapter 20 | Filtering Commands
– 182 –
delete - Key word that removes a MAC address from the filter table
mac-address - Specifies a MAC address in the form xx-xx-xx-xx-xx-xx.
Default
Disabled
Command Mode
Global Configuration
Example
AP(config)#filter acl-destination-address add 00-12-34-56-78-9a
AP(config)#filter acl-destination-address enable
AP(config)#
filter ethernet-type
enabled
This command checks the Ethernet type on all incoming and outgoing Ethernet
packets against the protocol filtering table. Use the no form to disable this feature.
Syntax
[no] filter ethernet-type enabled
Default
Disabled
Command Mode
Global Configuration
Command Usage
This command is used in conjunction with the filter ethernet-type protocol
command to determine which Ethernet protocol types are to be filtered.
Example
AP(config)#filter ethernet-type enabled
AP(config)#
Related Commands
filter ethernet-type protocol
filter ethernet-type
protocol
This command sets a filter for a specific Ethernet type. Use the no form to disable
filtering for a specific Ethernet type.
Syntax
[no] filter ethernet-type protocol <protocol>