User's Manual

Chapter 23 | Ethernet Interface Commands
– 205 –
show interface
ethernet
This command displays the status for the Ethernet interface.
Syntax
show ethernet interface
Default Setting
Ethernet interface
Command Mode
Exec
Example
AP#show interface ethernet
Ethernet Interface Information
========================================
IP Address : 192.168.2.10
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.2.254
Primary DNS :
Secondary DNS :
Management IP : 192.168.1.10
Management Subnet : 255.255.255.0
IPv6 Address : 2001:db8::1
IPv6 Subnet Mask : 64
IPv6 Gateway : 2001:db8::2
IPv6 Primary DNS :
IPv6 Secondary DNS :
Admin status : Up
Operational status : Up
========================================
AP#