User's Manual

Chapter 24 | Wireless Interface Commands
– 212 –
min-allowed-rate This command selects minimum allowed transmit data rates for the AP.
Syntax
min-allowed-rate {all | <cck-rate> <ofdm-rate> <singlestream-rate>
<doublestream-rate>}
all - Selects all available rates.
cck-rate - Specifies the minimum CCK rate (2.4 GHz radio only).
(Options: 1, 2, 5. 5, 11 Mbps)
ofdm-rate - Specifies the minimum OFDM rate.
(Options: 6, 9, 12, 18, 24, 36, 48, 54 Mbps)
singlestream-rate - Specifies the minimum 802.11n single stream rate.
(Options: MCS0, MCS1, MCS2, MCS3, MCS4, MCS5, MCS6, MCS7)
doublestream-rate - Specifies the minimum 802.11n double stream rate.
(Options: MCS8, MCS9, MCS10, MCS11, MCS12, MCS13, MCS14, MCS15)
Default Setting
CCK Rate: 1 Mbps
OFDM Rate: 6 Mbps
Single Stream Rate: MCS0
Double Stream Rate: MCS8
Command Mode
Interface Configuration (Wireless)
Example
AP(if-wireless 0)# min-allowed-rate 1 6 mcs0 mcs8
AP(if-wireless 0)#
disable-coexist This command prevents the operation of both 20 MHz and 40 MHz channel
bandwidths in the wireless network.
Syntax
disable-coexist <n | y>
n - No, do not disable channel coexistance.
y - Yes, disable channel coexistance.
Default Setting
No
Command Mode
Interface Configuration (Wireless)