User's Manual

Chapter 24 | Wireless Interface Commands
– 221 –
multicast-enhance This command enables a feature that improves multicast video quality for wireless
clients. Use the no form to disable the feature.
Syntax
[no] multicast-enhance
Default Setting
Disabled
Command Mode
Interface Configuration (Wireless-VAP)
Command Usage
When a wireless client joins a multicast group, this feature converts multicast
packets to unicast packets to improve multicast video quality.
Example
AP(if-wireless 0: VAP[0])# multicast-enhance
set_vap_mcastenhance 0 0 2
This setting has not been effective !
If want to take effect, please execute make-security-effective command !
AP(if-wireless 0: VAP[0])#
shutdown (VAP) This command disables the VAP interface. Use the no form to restart the interface.
Syntax
[no] shutdown
Default Setting
Interface enabled
Command Mode
Interface Configuration (Wireless-VAP)
Command Usage
You must first enable VAP interface 0 before you can enable VAP interfaces 1 to 15.
Example
AP(if-wireless 0: VAP[0])# shutdown
This setting has not been effective !
If want to take effect, please execute make-security-effective command !
AP(if-wireless 0: VAP[0])#