User's Manual

Chapter 24 | Wireless Interface Commands
– 225 –
long-distance
reference-data
This command computes settings that allow wireless clients a long distance from
the AP to maintain communications.
Syntax
long-distance reference-data <distance>
distance - An approximate distance in meters. (Range: 1-50000 meters)
Default
0 (disabled)
Command Mode
Interface Configuration (Wireless)
Command Usage
Enter the approximate distance (in meters) of the client from the AP. The AP
computes a set of recommended values for SlotTime, ACKTimeOut and
CTSTimeOut. You can use the recommended values or enter your own values that
work for your specific environment.
Example
AP(if-wireless 0)# long-distance reference-data 1000
Distance(m): 1000
Slot time(us): 15
ACKTimeOut(us): 56
CTSTimeOut(us): 56
AP(if-wireless 0)#
long-distance slottime This command sets the slot time for long-distance communications.
Syntax
long-distance slottime <time>
time - The adjusted slot time in microseconds.
Default
9 microseconds
Command Mode
Interface Configuration (Wireless)
Example
AP(if-wireless 0)# long-distance slottime 25
For making changes effective, please execute make-RF-setting-effective
command after entering all three long distance parameters!
AP(if-wireless 0)#