User's Manual

Chapter 24 | Wireless Interface Commands
– 231 –
show station This command shows the wireless clients associated with the access point.
Command Mode
Exec
Example
AP#show station
Station Table Information
========================================
Wireless Interface 0 VAPs List:
if-wireless 0 VAP [0] :
ADDR RSSI Tx(Mbps) Rx(Mbps) IP Privacy
Authentication
fc:25:3f:70:1a:4f 22 0M 6M 0.0.0.0 off Open
fc:25:3f:5c:32:49 20 0M 13M 0.0.0.0 off Open
if-wireless 0 VAP [1] :
if-wireless 0 VAP [2] :
if-wireless 0 VAP [3] :
if-wireless 0 VAP [4] :
if-wireless 0 VAP [5] :
if-wireless 0 VAP [6] :
if-wireless 0 VAP [7] :
if-wireless 0 VAP [8] :
if-wireless 0 VAP [9] :
if-wireless 0 VAP [10] :
if-wireless 0 VAP [11] :
if-wireless 0 VAP [12] :
if-wireless 0 VAP [13] :
if-wireless 0 VAP [14] :
if-wireless 0 VAP [15] :
Wireless Interface 1 VAPs List:
if-wireless 1 VAP [0] :
if-wireless 1 VAP [1] :
if-wireless 1 VAP [2] :
if-wireless 1 VAP [3] :
if-wireless 1 VAP [4] :
if-wireless 1 VAP [5] :
if-wireless 1 VAP [6] :
if-wireless 1 VAP [7] :
if-wireless 1 VAP [8] :
if-wireless 1 VAP [9] :
if-wireless 1 VAP [10] :
if-wireless 1 VAP [11] :
if-wireless 1 VAP [12] :
if-wireless 1 VAP [13] :
if-wireless 1 VAP [14] :
if-wireless 1 VAP [15] :
========================================
AP#