User's Manual

Chapter 27 | Link Integrity Commands
– 251 –
Example
AP(config)# link-integrity link-fail-action 0 enable
AP(config)#
show link-integrity This command displays the current link integrity configuration.
Command Mode
Exec
Example
AP#show link-integrity
Link Integrity Information
===================================================================
Link integrity: disabled
Destination IP: 192.168.2.254
Detect Interval: 60
Response Timeout: 2
Retry Count if no response: 5
Link fail action - Shutdown Radio 0: disabled
Link fail action - Shutdown Radio 1: disabled
AP#