User's Manual

– 252 –
28 Link Layer Discovery Commands
LLDP allows devices in the local broadcast domain to share information about
themselves. LLDP-capable devices periodically transmit information in messages
called Type Length Value (TLV) fields to neighbor devices. Advertised information is
represented in Type Length Value (TLV) format according to the IEEE 802.1ab
standard, and can include details such as device identification, capabilities and
configuration settings.
This information can be used by SNMP applications to simplify troubleshooting,
enhance network management, and maintain an accurate network topology.
lldp service This command enables LLDP on the access point. Use the no form to disable LLDP.
Syntax
[no] lldp service
Default Setting
Enabled
Command Mode
Global Configuration
Example
AP(config)# lldp service
AP(config)#
Table 24: Link Layer Discovery Commands
Command Function Mode Page
lldp service Enables the transmission of LLDP information GC
252
lldp transmit hold-muliplier Sets the message transmission hold time GC
253
lldp transmit interval Sets the message transmission interval time GC
253
lldp transmit re-init-delay Sets the reinitial delay time GC
254
lldp transmit delay-to-local-
change
Sets the transmission delay value GC
254
show lldp Shows the current LLDP information Exec
255