User's Manual

– 265 –
31 QoS Commands
The QoS commands configure QoS priority mapping for traffic on VAP interfaces.
The AP enables Wi-Fi Multimedia (WMM) 802.1d priorities to be mapped to 802.1p
priorities or IP DSCP priorities.
qos vap-802.1p This command enables the setting of VAP traffic to a specific 802.1p priority value.
Syntax
qos vap-802.1p <enable | disable>
enable - Enables the VAP traffic mapping to an 802.1p priority value.
disable - Disables the feature.
Default
Disabled
Command Mode
Interface Configuration (Wireless-VAP)
Table 29: QoS Commands
Command Function Mode Page
qos vap-802.1p Enables the setting of VAP traffic to a specific 802.1p
priority value
IC-W
VAP
265
qos vap-802.1p
retagged-user-
priority
Sets the 802.1p priority value for VAP traffic IC-W
VAP
266
qos 802.1d-802.1p Enables the mapping of WMM 802.1d priority values to
802.1p values
IC-W
VAP
267
qos 802.1d-802.1p
mapping-template
Sets the mapping template for WMM 802.1d to 802.1p
priority mapping
IC-W
VAP
267
qos 802.1d-dscp Enables the mapping of WMM 802.1d priority values to IP
DSCP values
IC-W
VAP
268
qos 802.1d-dscp
mapping-template
Sets the mapping template for WMM 802.1d to IP DSCP
priority mapping
IC-W
VAP
269
qos qos-template qos-
template-name
Sets the name for a QoS mapping template IC-W
VAP
270
qos qos-template qos-
template-priority
Maps priority values in a QoS mapping template IC-W
VAP
270
qos qos-template qos-
template-show
Shows the priority mapping in all QoS templates IC-W
VAP
271