User's Manual

Chapter 31 | QoS Commands
– 267 –
qos 802.1d-802.1p This command enables the mapping of WMM 802.1d priority values to 802.1p
values on a VAP interface.
Syntax
qos 802.1d-802.1p <enable | disable>
enable - Enables the mapping of WMM 802.1d to 802.1p priority values.
disable - Disables the feature.
Default
Disabled
Command Mode
Interface Configuration (Wireless-VAP)
Command Usage
◆ This QoS feature requires a QoS mapping template to be configured using the
qos qos-template qos-template-priority command. The mapping template can
then be linked to the 802.1d-to-802.1p priority mapping using the qos 802.1d-
802.1p mapping-template command.
◆ To implement this command on a VAP interface the default VLAN ID for the VAP
must be set to any other value than 1.
Example
AP(if-wireless 0: VAP[0])# qos 802.1d-802.1p enable
This setting has not been effective !
If want to take effect, please execute make-security-effective command !
AP(if-wireless 0: VAP[0])#
qos 802.1d-802.1p
mapping-template
This command sets the mapping template to use for the WMM 802.1d to 802.1p
priority mapping on a VAP interface.
Syntax
qos 802.1d-802.1p mapping-template <template-id>
template-id - The identifying number of a QoS mapping template.
(Range: 1-8)
Default
1
Command Mode
Interface Configuration (Wireless-VAP)