User's Manual
Chapter 2
| Initial Configuration
Web Quick Start
– 27 –
Figure 5: Quick Start - Step 1
The following items are displayed on the first page of the Quick Start wizard:
Identification
◆ System Name — The name assigned to the access point.
(Default: WAP5110)
Change Password
◆ Username/Guest Username — The name of the user is fixed as either “admin”
or “guest” and is not configurable.
◆ Old Password — If the unit has been configured with a password already,
enter that password, otherwise enter the default password “null.”
◆ New Password — The password for management access.
(Length: 5-32 characters, case sensitive)
◆ Confirm New Password — Enter the password again for verification.
Country Code
◆ Country Code — Configures the access point’s country code from a drop down
menu, which identifies the country of operation and sets the authorized radio
channels.