User's Manual

Chapter 31 | QoS Commands
– 270 –
qos qos-template qos-
template-name
This command sets the name of a QoS priority mapping template.
Syntax
qos qos-template qos-template-name <template-id> <template-name>
template-id - The identifying number of a QoS mapping template.
(Range: 1-8)
template-name - The user-defined name of a QoS mapping template.
(Maximum 32 alphanumeric characters; can include “-” and “_”)
Default
ID 1: default_up_mapping_1
ID 2: default_up_mapping_2
ID 3: default_up_mapping_3
ID 4: default_up_mapping_4
ID 5: default_up_mapping_5
ID 6: default_up_mapping_6
ID 7: default_up_mapping_7
ID 8: default_up_mapping_8
Command Mode
Interface Configuration (Wireless-VAP)
Example
AP(if-wireless 0: VAP[0])# qos qos-template qos-template-name 3 test-template
AP(if-wireless 0: VAP[0])#
qos qos-template qos-
template-priority
This command configures priority values in a QoS priority mapping template.
Syntax
qos qos-template qos-template-priority <template-id> <prirority-list>
template-id - The identifying number of a QoS mapping template.
(Range: 1-8)
prirority-list - The mapped priority values a QoS mapping template.
(Range: 0-7; the list is enterd as a sequence of eight numbers, for example
“01234567”)
Default
01234567
Command Mode
Interface Configuration (Wireless-VAP)