User's Manual

Chapter 31 | QoS Commands
– 271 –
Example
AP(if-wireless 0: VAP[0])# qos qos-template qos-template-priority 1 10234765
AP(if-wireless 0: VAP[0])#
qos qos-template qos-
template-show
This command displays the user-defined QoS priority mapping templates and their
priority mapping configuration.
Syntax
qos qos-template qos-template-show
Default
none
Command Mode
Interface Configuration (Wireless-VAP)
Example
AP(if-wireless 0: VAP[0])# qos qos-template qos-template-show
----------Qos Mapping Template---------------
id priority name
1 10234765 test-template
2 01234567 default_up_mapping_2
3 01234567 default_up_mapping_3
4 01234567 default_up_mapping_4
5 01234567 default_up_mapping_5
6 01234567 default_up_mapping_6
7 01234567 default_up_mapping_7
8 01234567 default_up_mapping_8
----------Qos Mapping Template---------------
AP(if-wireless 0: VAP[0])#