User's Manual

Chapter 3 | System Settings
Administration Settings
– 34 –
Administration Settings
The Administration Settings page configures some basic settings for the AP, such as
the system identification name, the management access passwords, and the
wireless operation Country Code.
Figure 9: Administration
The following items are displayed on this page:
◆ System Name — An alias for the AP, enabling the device to be uniquely
identified on the network. (Default: WAP5110; Range: 1-32 characters)
◆ Username/Guest Username — The name of the user is fixed as either “admin”
or “guest” and is not configurable.
◆ Old Password — Type your current password.
◆ New Password — The password for management access.
(Length: 5-32 characters, case sensitive)
◆ Confirm New Password — Enter the password again for verification.
◆ Country Code — Configures the AP’s country code, which identifies the
country of operation and sets the authorized radio channels.