User's Manual

Chapter 4 | Management Settings
Simple Network Management Protocol
– 53 –
strings to be configured for authentication. Trap notifications can be enabled and
sent to up to four management stations.
Figure 21: SNMP Basic Settings
The following items are displayed on this page:
◆ SNMP — Enables or disables SNMP management access and also enables the
access point to send SNMP traps (notifications). (Default: Disable)
◆ System Location — A text string that describes the system location.
(Maximum length: 255 characters)
◆ System Contact — A text string that describes the system contact. (Maximum
length: 255 characters)
◆ Read-Only Community — Defines the SNMP community access string that
has read-only access. Authorized management stations are only able to retrieve
MIB objects. (Maximum length: 23 characters, case sensitive; Default: public)
◆ Read-Write Community — Defines the SNMP community access string that
has read/write access. Authorized management stations are able to both
retrieve and modify MIB objects. (Maximum length: 23 characters, case
sensitive; Default: private)