User's Manual

– 60 –
5 Advanced Settings
This chapter describes advanced settings on the access point. It includes the
following sections:
◆ “Local Bridge Filter” on page 60
◆ “Link Layer Discovery Protocol” on page 61
◆ “Access Control Lists” on page 63
◆ “Link Integrity” on page 66
Local Bridge Filter
The access point can employ network traffic frame filtering to control access to
network resources and increase security. You can prevent communications
between wireless clients and prevent access point management from wireless
clients. Also, you can block specific Ethernet traffic from being forwarded by the
access point.
The Local Bridge Filter sets the global mode for wireless-to-wireless
communications between clients associated to Virtual AP (VAP) interfaces on the
access point. (Default: Disabled)
Figure 27: Local Bridge Filter
The following items are displayed on this page:
◆ Disabled — All clients can communicate with each other through the access
point.