User's Manual

Chapter 5 | Advanced Settings
Access Control Lists
– 65 –
Ethernet Type The Ethernet Type Filter controls checks on the Ethernet type of all incoming and
outgoing Ethernet packets against the protocol filtering table. (Default: Disabled)
Figure 31: Ethernet Type Filter
The following items are displayed on this page:
◆ Disabled — Access point does not filter Ethernet protocol types.
◆ Enabled — Access point filters Ethernet protocol types based on the
configuration of protocol types in the filter table. If the status of a protocol is set
to “ON,” the protocol is filtered from the access point.
◆ Local Management — Describes the Ethernet filter type.
◆ ISO Designator — Describes the ISO Designator identifier.
◆ Filter Status — Turns the filter on or off.