User's Manual

Chapter 6 | Wireless Settings
Virtual Access Points (VAPs)
– 76 –
Figure 37: VAP Settings
The following items are displayed on this page:
◆ VAP Number — The number associated with the VAP, 0-15.
◆ SSID — The name of the basic service set provided by a VAP interface. Clients
that want to connect to the network through the access point must set their
SSID to the same as that of an access point VAP interface. (Default:
EAP9112A_11BGN_# (0 to 15) for 2.4 GHz, EAP9112A_11NA_# (0 to 15) for
5 GHz; Range: 1-32 characters)
◆ Enable — Enables the specified VAP. (Default: Disabled)
◆ Status — Displays the mode of the VAP. The default is set to "AP," for normal
access point services.
◆ Edit Setting — Click to open the page to configure basic and security settings
for the selected VAP.
◆ QoS Setting — Click to open the page to configure QoS settings for the
selected VAP.
◆ Bandwidth Setting — Click to open the page to configure bandwidth control
for the selected VAP.
VAP Basic Settings Sets the basic operating mode and other settings for the VAP.