User's Manual

Chapter 6 | Wireless Settings
Virtual Access Points (VAPs)
– 82 –
◆ Key Type – Select the preferred method of entering WEP encryption keys for
the VAP, either hexadecimal digits (Hex) or alphanumeric characters (ASCII).
◆ Key Length – Select 64 Bit or 128 Bit key length. Note that the same size of
encryption key must be supported on all wireless clients. (Default: 64 bit)
◆ Key – Enter up to four WEP encryption keys for the VAP.
■
Hex: Enter keys as 10 hexadecimal digits (0-9 and A-F) for 64 bit keys, or 26
hexadecimal digits for 128 bit keys.
■
ASCII: Enter keys as 5 alphanumeric characters for 64 bit keys, or 13
alphanumeric characters for 128 bit keys.
Note: Key index, type, and length must match that configured on the clients.
VAP QoS Settings Click the QoS Setting link from the VAP Settings page to access the QoS priority
mapping configuration for traffic on the VAP interface.
Figure 42: QoS Settings
The following items are displayed in the VAP QoS Settings page: