Spec Sheet

ManualsBrandsSMC ManualsAir-Compressor Accessories1/2" Heavy Duty Automatic Tank Drain w/ Bracket (7 PSI To 232 PSI)

Note) The accessories (Option) are shipped unassembled, but packed in the same

container.

Note) Use for air compressor with flow more than 50 l /min (ANR).

How to Order

ADH4000

Basic size

Heavy duty

auto-drain

Nil

Thread type

NPT

Port size

1/2 (Female thread)

Accessory (Option)

∗

Nil

No option (Standard)

Bracket set

Ball valve piping set

Float type

N.O. (Normally open: Open in the case of pressure loss)

2.5 MPa

1.6 MPa

0.05 to 1.6 MPa

Compressed air

400 cc/min (Pressure 0.7 MPa, in the case of water)

1.2 kg (With bracket: 1.3 kg)

Light gray

Auto-drain type

Auto-drain valve type

Proof pressure

Max. operating pressure

Operating pressure range

Note)

Fluid

Note)

Ambient and

Fluid temperature

Max. drain discharge

Weight

Paint color

Specifications

5 to 60°C (With no condensation)

Accessory (Option)

Description

Bracket set

Ball valve piping set

Part no.

BM58

ADH-C400

Contents

Bracket ····································1 pc.

M6 x 10l (Hex. bolt) ·················2 pcs.

Ball valve/Rc 1/2 ············

···

············ 1 pc.

Barrel nipple/R 1/2 ························ 2 pcs.

Elbow/Rc 1/2 ············

········

············1 pc.

JIS Symbol

Mounting example

Air compressor

Aftercooler

Air tank

Air dryer

ADH4000 ADH4000

Bracket set

Ball valve piping set

Summary of content (10 pages)

PAGE 1
Related Products: Heavy Duty Auto Drain Series ADH4000 Specifications Easy maintenance It is possible to maintain without changing existing piping. Auto-drain type No need for electric power and no waste of air. Proof pressure Float style drain allows automatic drain discharge without electric power. Aftercooler Air tank Air dryer N.O. (Normally open: Open in the case of pressure loss) Auto-drain valve type 2.5 MPa Max. operating pressure 1.6 MPa Operating pressure range Note) 0.05 to 1.
PAGE 2
Series ADH4000 Construction !1 q o i Component Parts u w y IN t r 10-1 e 10-2 !0 10-3 No. q Description Body Material Aluminum alloy Note Baking finish w Housing Aluminum alloy Baking finish e Drain guard Aluminum alloy Baking finish r Float t Pilot valve y Lever Resin u Flushing button Brass i Orifice o Diaphragm Foam rubber Stainless steel + Rubber Rubber Replacement Parts No. !0 Part no.
PAGE 3
Heavy Duty Auto drain Series ADH4000 Dimensions M6 hex. socket head bolt (including bracket set) [Applicable hex. wrench nominal size 5] 108 100 M6 hex. socket head bolt (including bracket set) [Applicable hex. wrench nominal size 5] 58 33 100 Pilot exhaust port Bleed valve Bracket mounting hole (Both sides) Flushing button Drain inlet 1/2 female thread (Refer to “How to Order” for type of thread.
PAGE 4
Safety Instructions These safety instructions are intended to prevent a hazardous situation and/or equipment damage. These instructions indicate the level of potential hazard by labels of "Caution", "Warning" or "Danger". To ensure safety, be sure to observe ISO 4414 Note 1), JIS B 8370 Note 2) and other safety practices. Caution : Operator error could result in injury or equipment damage. Warning : Operator error could result in serious injury or loss of life.
PAGE 5
Common Precautions Be sure to read before handling. For detailed precautions on every series, refer to main text. Selection Warning 1. Confirm the specifications. Products represented in this catalog are designed for use in compressed air appllications only (including vacuum), unless otherwise indicated. Do not use the product outside their design parameters. Please contact SMC when using the products in applications other than compressed air (including vacuum). Mounting Warning 1.
PAGE 6
Quality Assurance Information (ISO 9001, ISO 14001) Reliable quality of products in the global market To enable our customers throughout the world to use our products with even greater confidence, SMC has obtained certification for international standards “ISO 9001” and “ISO 14001”, and created a complete structure for quality assurance and environmental controls. SMC products pursue to meet its customers’ expectations while also considering company’s contribution in society.
PAGE 7
SMC Product Conforming to Inter SMC products complying with EN/ISO, CSA/UL standards are supporting CE Mark The CE mark indicates that machines and components meet essential requirements of all the EC Directives applied. It has been obligatory to apply CE marks indicating conformity with EC Directives when machines and components are exported to the member Nations of the EU.
PAGE 8
SMC Product Conforming to International Standards national Standards you to comply with EC directives and CSA/UL standards. Mark of compliance for CSA/UL Mark of compliance for CSA CSA Standards & UL Standards UL and CSA standards have been applied in North America (U.S.A. and Canada) symbolizing safety of electric products, and are defined to mainly prevent danger from electric shock or fire, resulting from trouble with electric products.
PAGE 9
SMC’s Global Service Network America Europe U.S.A. SMC Corporation of America 3011 North Franklin Road Indianapolis, IN 46226, U.S.A. TEL: 317-899-4440 FAX: 317-899-3102 U.K. SMC Pneumatics (U.K.) Ltd. Vincent Avenue, Crownhill, Milton Keynes, MK8 0AN, Backinghamshire, U.K. TEL: 01908-563888 FAX: 01908-561185 CANADA SMC Pneumatics (Canada) Ltd.
PAGE 10
SMC’s Global Service Network Europe Oceania/Asia FINLAND SMC Pneumatics Finland OY PL72, Tiistinniityntie 4, SF-02231 ESP00, Finland TEL: 09-8595-80 FAX: 09-8595-8595 AUSTRALIA SMC Pneumatics (Australia) Pty.Ltd. 14-18 Hudson Avenue Castle Hill NSW 2154, Australia TEL: 02-9354-8222 FAX: 02-9894-5719 NORWAY SMC Pneumatics Norway A/S Vollsveien 13C, Granfoss Næringspark N-1366 LYSAKER, Norway TEL: 67-12-90-20 FAX: 67-12-90-21 NEW ZEALAND SMC Pneumatics (New Zealand) Ltd. 8C Sylvia Park Road Mt.