www.smcpneumatics.nl Product Overview OVNL-01A-UK SMC Pneumatics BV De Ruyterkade 120 1011 AB Amsterdam Phone : +31 (0)20 531 88 88 Fax : +31 (0)20 531 88 80 info@smcpneumatics.nl www.smcpneumatics.
Terms of Delivery General delivery and payment conditions Applicable to all offers and contract concerning deliveries and/or services to be executed by SMC Pneumatics N.V./S.A. are the ORGALIME (S2000) general terms and conditions for delivery of metal, electro technical and associated electronic products. A copy of these conditions (August 2000 edition) will be sent free on request. In addition, the following conditions apply to all services and supplies, unless otherwise agreed in writing.
Energy Saving Dear customer, M ost of today’s manufacturing processes are fulfilled by using industrial automation equipment, taking over human requirements, improving efficiency, safety, quality and reducing cost. However, global markets are expanding – especially in emerging economies – so is your competition from these areas. Added value is and remains an important condition to differentiate.
G e n er al in formation Organisation SMC worldwide As a worldwide leading expert in pneumatics SMC is counting 260 sales offices in 78 countries. With over 15 000 employees, SMC is never far away from you or your customers. This aligns perfectly with the mission: providing innovative products and services for industrial automation, adding value and fitting the needs of local customers.
Ge n e r a l i n fo r matio n SMC approach Customized support and efficient product development In competitive markets, technical support is not just about solving problems as they arise, but also to avoid them with solid knowledge and good support. SMC invests heavily in training his employees, so you can count on highly skilled and expertised engineers.
G e n er al in formation Products Primary products The comprehensive SMC product range consists of more than 11 000 products in 630 000 varieties. It includes products for general purpose as well as products for a very specific task. Together with a constant flow of new products, SMC is always able to point you in the right direction.
Ge n e r a l i n fo r matio n Make things easier! F or the full range of innovative products, please take a look at the SMC website. There you will find the Digital Catalogue that will help you find all product related information. As well as the SMC Model Selection Software and various Product Configurators helping you selecting the right products for your application.
Safety Always read before handling These safety instructions are intended to prevent hazardous situations and/or equipment damage. These instructions indicate the level of potential hazard by labeling • Caution!, • W ARNING! or • Danger!. To ensure safety, be sure to observe ISO 44141, JIS B 83702 and other safety practices (EN ISO 13849-13). • Caution! Operator error could result in injury or equipment damage. • W ARNING! Operator error could result in serious injury or loss of life.
1 Energy Saving 9
E n ergy S aving 1 Energy saving The worldwide leading expert in pneumatics develops energy saving solutions that helps you saving money and reducing your environmental impact. Energy saving inspections Our team of Energy Saving specialists and selected partners are ready to review your entire system – from the compressor to individual consumers – to identify leaks, faulty construction and find possible savings. Ten suggestions from our experts 1. Reduce the pressure to a minimum. 2.
En e r g y S avi n g 1 Reduce main line pressure By lowering the main line pressure you can achieve up to 30 percent savings (about 7–10 percent/bar). Create higher pressure only where needed with the help of local SMC pressure boosters and tanks. See chapter 2 for more information on VBA pressure booster. Avoid unregulated air Monitor the pressure and pressure drop using SMC pressure sensors and switches. See chapters 2 and 9 for more information on regulators and pressure switches.
E n ergy S aving 1 Reduce consumption of cylinders SMC’s double force cylinder consumes about 35 percent less air than a conventional cylinder. See chapter 6 for more information on MGZ double force cylinder. Reduce consumption by blowing By using correctly dimensioned nozzles you can reduce your air consumption with up to 50 percent. SMC’s energy efficient air guns can deliver up to 30 percent savings, compared to other air guns. See chapter 10 for more information on VMG blowgun.
2 Supply of compressed air (1 or P) Exhaust (3, 5 or E, R) Silencer Filter with manual water drain Filter with automatic water drain Pressure regulator with secondary exhaust Lubricator FRL – filter/regulator/lubricatorassembly Air preparation equipment 13
Ai r pr epa ratio n equipme nt 2 Contents preparation – modular system Air Accessories and spare parts 17 21 23 VP-X538 – valve for safety-related systems 23 AMG – water separator; AM, AMD AMH – mist and micro mist separators & 24 IDG – membrane air dryer 25 IDFA – dryer 26 – high flow air filter AF 26 SFD – clean air filter, in-line 27 AMC – filter silencer 27 ARM5, -10 & -11 – compact manifold regulator 28 AR & XT13 – high flow regulator 28 ARJ – miniature regu
A i r p r epa r atio n equ ipme n t Installation and operation SMC’s modular air treatment system enable significant advantages for warehousing, assembly and service. 2 E ach unit is equipped with connection threads and therefore can also be used for single mounting (no extra adapters needed) With only a small component stock, a machine can be equipped with both modular units and separate regulators, filter and lubricators. This also means benefits in exchange and repair.
Ai r pr epa ratio n equipme nt 2 Filters Lubricators Operation Open the blow-off valve to blow out the collected condensate; do not let the liquid level reach up to the whirl disc. The minimum flow given in technical data provide proper function. As a reference for setting the oil flow, SMC indicates 5 drops/min. Maintenance In case of malfunction, check if the flow direction is correct.
A i r p r epa r atio n equ ipme n t Air preparation – modular system Medium Degree of filtration Max. working pressure Min. working pressure Operating temperature Series Pressure gauge Flow Compressed air Filter, filter regulator: 5 µm Microfilter: 0.3 µm; sub-microfilter: 0.01 µm 1 MPa (10 bar) Lubricator: 0.05 MPa (0.5 bar); automatic drain: 0.15 MPa (1.
Ai r pr epa ratio n equipme nt Air preparation – modular system 2 Filter regulator AW – with manual drain Filter regulator AW – with automatic drain Without pressure gauge Without pressure gauge Part number AW10-M5 AW20-F01 AW20-F02 AW30-F02 AW30-F03 AW40-F04 AW40-F06 AW60-F06 AW60-F10 With built-in pressure gauge Connection M5 G1/8 G1/4 G1/4 G3/8 G1/2 G3/4 G3/4 G1 Part number AW20-F01E AW20-F02E AW30-F02E AW30-F03E AW40-F04E AW40-F06E AW60-F06E AW60-F10E Connection G1/8 G1/4 G1/4 G3/8 G1/2 G3/4 G
A i r p r epa r atio n equ ipme n t Air preparation – modular system Regulator ARG – with pressure gauge in handle Part number ARG20K-F02G1 ARG30K-F03G1 ARG40K-F04G1 Panel nut – for ARG and AWG Connection G1/4 G3/8 G1/2 Part number ARG20P-260S ARG30P-260S ARG40P-260S Filter regulator AWG – with pressure gauge in handle Part number AWG20K-F02G1 AWG30K-F03G1 AWG40K-F04G1 Connection G1/4 G3/8 G1/2 Bracket – with panel nut, for ARG and AWG Part number ARG20P-270AS ARG30P-270AS ARG40P-270AS Regulator AR
Ai r pr epa ratio n equipme nt Air preparation – modular system 2 Pressure switch IS10M – pressure range: 0.1–0.6 MPa (max. working pressure: 0.7 MPa) Part number IS10M-20-6L IS10M-30-6L IS10M-40-6L IS10M-60-6L Series 20 25.30 40 50, 55, 60 Pressure switch IS10M Pressure switch IS10E Pressure switch IS10E – with threaded connection (adapter), pressure range: 0.1–0.6 MPa (max. working pressure: 0.7 MPa) Part number IS10E-20F02-6L IS10E-30F03-6L IS10E-40F04-6L Series 20 25.
A i r p r epa r atio n equ ipme n t Air preparation – modular system Accessories and spare parts Connection block Output Part number E100-M5 E200-F01 E200-F02 E200-F03 E300-F03 E300-F04 E400-F02 E400-F03 E400-F04 E400-F06 E600-F06 E600-F10 Series 10 20 20 20 25, 30 25, 30 40 40 40 40 50, 55, 60 50, 55, 60 Connection M5 G1/8 G1/4 G3/8 G3/8 G1/2 G1/4 G3/8 G1/2 G3/4 G3/4 G1 Output with check valve – prevents back flow of lubricated air Part number AKM2000-F02 AKM3000-F02 AKM4000-F03 Series 20 25, 30 40
Ai r pr epa ratio n equipme nt Air preparation – modular system 2 Knob cover – only fits new series. Lock not included.
A i r p r epa r atio n equ ipme n t EAV – soft start-up valve Medium Degree of filtration Max. working pressure Min. working pressure Operating temperature Pressure gauge Voltage Power requirements Electrical connection Enclosure Air, lubricated or not lubricated 5 µm 1 MPa (10 bar) 0.2 MPa (2 bar) 0 to 60 °C G1/8 24 VDC (220 VAC and others on request) 1.
Ai r pr epa ratio n equipme nt AMG – water separator; AM, AMD & AMH – mist and micro mist separators 2 Medium Degree of filtration Max. working pressure Min. working pressure Operating temperature Size Connection Compressed air See below 1.0 MPa (10 bar) 0.05 MPa (0.5 bar); 0.15 MPa (1.
A i r p r epa r atio n equ ipme n t IDG – membrane air dryer Type Medium 1 Air 5 10 20 30 50 60 Pressure range 0.3–0.85 MPa (3–8.5 bar) 0.3–1.0 MPa (3–10 bar) Operating temperature Dew point Dew point indicator –5 to 55 °C –20 °C –20, –15 °C — Req.
Ai r pr epa ratio n equipme nt IDFA – dryer 2 Supply pressure Incoming air temperature Ambient air temperature Voltage 0.15–1 MPa (1.5–10 bar); K versions: 0.15–1.6 MPa (1.5–16 bar) 5 to 50 °C 2 to 40 °C (relative humidity 85 % or less) 230 V, 50 Hz ■ Modern design ensures a constant stable pressure dew point and low power consumption ■ Heat exchangers in stainless steel gives long life combined with low pressure drop Flow capacity ISO8573.
A i r p r epa r atio n equ ipme n t SFD – clean air filter, in-line Medium Degree of filtration Working pressure Operating temperature Air/nitrogen 0.01 µm 1.0 MPa (10 bar) 5 to 45 °C 2 ■ Suitable for sensitive air blow applications Clean air filter Part number SFD100-C06 SFD200-C08 SFD100-F02 SFD200-F02 Description Filter in-line 0.01 µm Filter in-line 0.01 µm Filter in-line 0.01 µm Filter in-line 0.01 µm Flow 80 ln/min 300 ln/min 100 ln/min 500 ln/min Note! Fixing brackets not included.
Ai r pr epa ratio n equipme nt ARM5, -10 & -11 – compact manifold regulator 2 Medium Max. working pressure Secondary pressure Operating temperature Flow Air 1.0 MPa (10 bar) 0.05–0.7 MPa (0.5–7.0 bar) 5 to 60 °C ARM5: 200 ln/min; ARM10 & -11: 300 ln/min ■ Flexible design allows numerous combinations ■ Ideal in applications with centralized pressure regulation for different functions Regulator – single mounting Part number ARM5SA-06-A ARM5SA-08-A ARM10-08BG ARM10F1-08GPC 1.
A i r p r epa r atio n equ ipme n t ARJ – miniature regulator Type Medium Degree of filtration Max. working pressure Secondary pressure Operating temperature Max. flow ARJ1020 ARJ210 ARJ310 Compressed air, lubricated or not lubricated 5 µm 0.8 MPa (8 bar) 0.1–0.7 MPa 0.2–0.7 MPa 0.2–0.
Ai r pr epa ratio n equipme nt ARP – precision regulator 2 Type Medium Degree of filtration Working pressure Operating temperature Flow Sensitivity ARP20 ARP30 ARP40 Air 0.3 µm (microfilter) recommended 0.7 MPa (7 bar) –5 to 60 °C 600 ln/min 900 ln/min 300 ln/min 0.2% F.S. ■ Fits SMC’s modular adapters ■ Small leakage (less than 1 ln/min at 0.
A i r p r epa r atio n equ ipme n t IR1000, -2000 & -3000 – precision regulator Type Medium Degree of filtration Max. inlet pressure Operating temperature Max. flow Sensitivity IR1000/1010/1020 IR2000/2010/2020 Compressed air, not lubricated 0.3 µm (microfilter) 1.0 MPa (10 bar) –5 to 60 °C 550/600/900 ln/min 150/250/400 ln/min 0.2% F.S.
Ai r pr epa ratio n equipme nt Type Medium Degree of filtration Max. inlet pressure Min. inlet pressure Secondary pressure Flow (ln/min) Operating temperature Connection Monitor signal 1. 2. ITV1030 ITV2030 ITV3030 ITV1050 ITV2050 Oil-free compressed air 5 µm (particle filter in combination with microfilter is recommended) 1.0 MPa (10 bar) Set pressure +0.
A i r p r epa r atio n equ ipme n t ITV0000 – E/P converter Type Medium Max. inlet pressure Min. inlet pressure Max. flow Operating temperature Connection Monitor signal Vikt ITV0010 ITV0030 ITV0050 Air1, degree of filtration min. 5 µm, oil-free air 0.2 MPa (2 bar) 1.1 MPa (10 bar) Secondary pressure +0.1 MPa 3.5 ln/min 6 ln/min 6 ln/min 0 to 50 °C Single unit 4 mm (ramp 6 mm and 4 mm) Analog 1–5 V 100 g or less 2 1.
Ai r pr epa ratio n equipme nt AN – silencer 2 Medium Max. working pressure Operating temperature Compressed air, lubricated or not lubricated 1.0 MPa (10 bar) 5 to 60 °C ■ Effective air silencing, 30 dB (A) ■ Size 1/4" and larger has damping elements in polyacetal – no risk of accidents Silencer Silencer Sintered bronze Push-in connection Part number AN120-M3 AN120-M5 AN101-01 AN110-01 Standard Silencing 11 dB (A) 18 dB (A) 13 dB (A) 21 dB (A) Conn. M3 M5 R1/8 R1/8 Flow 0.07 m3/min 0.
A i r p r epa r atio n equ ipme n t VBA – pressure booster Modell Medium Degree of filtration Connection Inlet pressure 1. VBA10A VBA11A VBA20A VBA40A Compressed air, not lubricated1 Microfilter 0.03 µm (SMC’s AM or AFM series) G1/4 G3/8 G1/2 0.1–1 MPa (1–10 bar) Secondary pressure 0.2–2 MPa (2–20 bar) 0.2–1 MPa (2–10 bar) Max. pressure boost Flow 1:1 2:1 400 ln/min 1000 ln/min 100 ln/min 1900 ln/min VBA43A 0.2–1.
Ai r pr epa ratio n equipme nt IDK – moisture control tube 2 Type Medium Max. working pressure Operating temperature Ambient Min. bending radius Accessories Colour Suitable fittings Materials IDK02 IDK04 IDK06 Compressed air 0.
3 Check valve Flow controller Adjustable flow controller Adjustable speed controller OR valve 1 2 1 1 2 AND valve 1 1 2 3 Quick exhaust valve 1 2 Flow control equipment 37
Fl ow co n trol equipme nt Contents AS – speed controller 41 Stainless steel 41 low cylinder speeds For 42 With exhaust function 42 ASV, AQ, KEA, ASD & ASP – quick exhaust valves, speed controller blocking valve & 43 AKH, AKB & EAK – check valves 44 ASN – metering silencer 44 ASR, ASQ & ASS – function couplings for motion 45 Subject to change 3 39 Protected against accidental actuation 38
F l ow co n t r o l equ ipme n t AS – speed controller Medium Degree of filtration Max. working pressure Min. working pressure Operating temperature Connection Flow Compressed air 10 µm 1.0 MPa (10 bar) 0.
Fl ow co n trol equipme nt AS – speed controller 3 Tubing mounted valve Bracket – for tubing mounted valve Speed controller – tubing mounted Part number AS1002F-02 AS1002F-23 AS1002F-04 AS1002F-06 AS2002F-04 AS2002F-06 AS2052F-08 AS3002F-08 AS3002F-10 AS4002F-12 Tubing outer diam. 2 mm 3.
F l ow co n t r o l equ ipme n t AS – speed controller Protected against accidental actuation Speed controller AS-D – cylinder mounted, Speed controller AS-D – cylinder mounted, tamper proof Part number AS1201F-M5-23D AS1201F-M5-04D AS1201F-M5-06D AS2201F-01-04SD AS2201F-01-06SD AS2201F-01-08SD AS2201F-02-06SD AS2201F-02-08SD AS3201F-03-06SD AS3201F-03-08SD AS3201F-03-10SD AS4201F-04-12SD Tubing diam. 3.
Fl ow co n trol equipme nt AS – speed controller For low cylinder speeds Speed controller AS-FM – cylinder mounted 3 Speed controller AS-FE – cylinder mounted For low cylinder speeds, 10–50 mm/s Part number AS1201FM-M5-23 AS1201FM-M5-04 AS1201FM-M5-06 AS2201FM-01-23S AS2201FM-01-04S AS2201FM-01-06S AS2201FM-01-08S AS2201FM-02-04S AS2201FM-02-06S AS2201FM-02-08S AS2201FM-02-10S Tubing diam. 3.2 4 6 3.
F l ow co n t r o l equ ipme n t ASV, AQ, KEA, ASD & ASP – quick exhaust valves, speed controller & blocking valve Medium Degree of filtration Max. working pressure Min. working pressure Operating temperature Connection Flow ■ ■ ■ ■ Compressed air 10 µm 1.0 MPa (10 bar) ASV, AQ, ASD, ASP: 0.1 MPa (1 bar); EAQ, EVR: 0.05 MPa (0.
Fl ow co n trol equipme nt AKH, AKB & AK – check valves 3 Medium Degree of filtration Max. working pressure Min. working pressure Operating temperature Connection Flow Compressed air 10 µm 1.0 MPa (10 bar) EAK: 0.02 MPa (0.2 bar); AKH/AKB: 0.005 MPa (0.
F l ow co n t r o l equ ipme n t ASR, ASQ & ASS – function couplings for motion Type Medium Degree of filtration Max. working pressure Adjustable pressure range Operating temperature Connection ASR & ASQ Compressed air 10 µm 1 MPa (10 bar) 0.1–0.3 MPa (1–3 bar) 5 to 60 °C See below ASQ ASS ASR 0.7 MPa (7 bar) 0.2–0.
2 3/2 valve, normally open Valve control, general symbol 3 1 4 2 5/2 valve, bistable Valve control, roll 513 4 4 2 Valve control, spring 5/2 valve, monostable 513 Valve control, push button 4 2 5/3 valve, closed center 513 Valve control, pilot valve 4 2 5/3 valve, open center Valve control, direct acting solenoid 513 4 2 5/3 valve, pressurized center Valve control, solenoid pilot valve 513 2 2/2 valve, normally closed, monostable, push button-controlled with spring return 3/2 valve,
So l en oid va lves, mechanical a nd ma nua l va lves Contents Multiply Cv by 980 to get a Qn value in ln/min. SY3000 & -5000 – overview 4 Cv 0.28 98 SV1000 – solenoid valve, cassette type Cv 0.23 99 SV2000 – solenoid valve, tie rod type Cv 0.48 101 SV2000 – solenoid valve, cassette type Cv 0.56 102 SV3000 – solenoid valve, plug-in Cv 0.93 104 SV4000 – solenoid valve, plug-in Cv 1.6 106 SV1000, -2000 & -3000 – solenoid valve, body ported Cv 0.28–0.
S o l e n oid va lves , mec h a n ica l a n d man u a l va lves SYJ300, -500 & -700 – 3/2 solenoid valve Cv 0.1–0.5 123 LVM09/090 – 2/3 port direct operated solenoid valve for chemistry & analysis Cv 0.018 139 EVT307, VO307 & EVT317 – 3/2 solenoid valve Cv 0.2–0.7 125 LVM10/100 – 2/3 port direct operated solenoid valve for chemistry & analysis Cv 0.03–0.04 139 Cv 0.2 126 VKF300 – 3 port direct operated solenoid valve VP – 3/2 solenoid valve, body ported Cv 0.9–3.
So l en oid va lves, mechanical a nd ma nua l va lves Directional control valves – solenoid valves Seal type, main valve Ideal size for actuator control Metal seal Rubber seal 4 Valve series Flow characteristics A, BE (2 position/ monostable) Cv value3 VQD1 0.07 VQD1000 VK1 0.12 VK3000 SJ 0.08–0.12 SJ2000/3000 SYJ 0.12–0.74 SYJ3000 SX VQZ Speed: 100 Applicable cylinder Ø6 Ø10 Ø16 Ø20 Ø25 Ø32 Ø40 Ø50 Ø63 mm/s or lower Ø80 Ø100 Ø125 SYJ5000 SYJ7000 0.18–0.
S o l e n oid va lves , mec h a n ica l a n d man u a l va lves 5 port for pneumatics Ø180 Ø200 Ø250 Ø300 Power consumption (W) Connection size Push-in fitting (Ø) Applicable Threaded connection (G) tubing size (mm) 2 M5 4 4 M5, 1/8 4, 6 M3, M5 2, 4, 6 M3, M5, 1/8, 1/4 4, 6, 8 0.6 M5, 1/8, 1/4, 3/8 4, 6, 8, 10 0.4 M5, 1/8, 1/4, 3/8 3.2, 4, 6, 8, 10 0.6 1/8, 1/4, 3/8, 1/2 4, 6, 8, 10, 12 0.4 M5 3.2, 4, 6, 8, 10, 12 0.35 (0.1)2 M5, 1/8, 1/4, 3/8, 1/2 4, 6, 8, 10, 12 1.
So l en oid va lves, mechanical a nd ma nua l va lves Directional control valves – solenoid valves Seal type, main valve Ideal size for actuator control Metal seal Rubber seal 4 Valve series Flow characteristics A, BE (2 position/ monostable) Cv value3 VQD1 0.07 VQD1000 VK1 0.12 VK3000 SJ 0.08–0.12 SJ1000/2000 SYJ 0.12–0.74 SYJ3000 SX VQZ Speed: 300 Applicable cylinder Ø6 Ø10 Ø16 Ø20 Ø25 Ø32 Ø40 Ø50 Ø63 SYJ5000 SYJ7000 0.18–0.
S o l e n oid va lves , mec h a n ica l a n d man u a l va lves 5 port for pneumatics Ø180 Ø200 Ø250 Ø300 Power consumption (W) Connection size Push-in fitting (Ø) Applicable Threaded connection (G) tubing size (mm) 2 M5 4 4 M5, 1/8 4, 6 M3, M5 2, 4, 6 M3, M5, 1/8, 1/4 4, 6, 8 0.6 M5, 1/8, 1/4, 3/8 4, 6, 8, 10 0.4 M5, 1/8, 1/4, 3/8 3.2, 4, 6, 8, 10 0.6 1/8, 1/4, 3/8, 1/2 4, 6, 8, 10, 12 0.4 M5 3.2, 4, 6, 8, 10, 12 0.35 (0.1)2 M5, 1/8, 1/4, 3/8, 1/2 4, 6, 8, 10, 12 1.
So l en oid va lves, mechanical a nd ma nua l va lves Directional control valves – solenoid valves Seal type, main valve Ideal size for actuator control Metal seal Rubber seal 4 Valve series Flow characteristics A, BE (2 position/ monostable) Cv value3 VQD1 0.07 VQD1000 VK1 0.12 VK3000 SJ 0.08–0.12 SYJ 0.12–0.74 SX VQZ Speed: 500 Applicable cylinder Ø6 Ø10 Ø16 Ø20 Ø25 Ø32 Ø40 Ø50 Ø63 mm/s or lower Ø80 Ø100 Ø125 Ø140 Ø160 SJ1000/2000 SYJ5000 SYJ7000 0.18–0.
S o l e n oid va lves , mec h a n ica l a n d man u a l va lves 5 port for pneumatics Ø180 Ø200 Ø250 Ø300 Power consumption (W) Connection size Push-in fitting (Ø) Applicable Threaded connection (G) tubing size (mm) 2 M5 4 4 M5, 1/8 4, 6 M3, M5 2, 4, 6 M3, M5, 1/8, 1/4 4, 6, 8 0.6 M5, 1/8, 1/4, 3/8 4, 6, 8, 10 0.4 M5, 1/8, 1/4, 3/8 3.2, 4, 6, 8, 10 0.6 1/8, 1/4, 3/8, 1/2 4, 6, 8, 10, 12 0.4 M5 3.2, 4, 6, 8, 10, 12 0.35 (0.1)2 M5, 1/8, 1/4, 3/8, 1/2 4, 6, 8, 10, 12 1.
So l en oid va lves, mechanical a nd ma nua l va lves SMC’s metal seal valves Valves in high-frequency use often suffer from wear on the seals. SMC’s metal seal valves resist such wear and have superior life time. 4 A valve spool change position inside the valve when it is affected manually, with spring force, or when power is applied to the coil. The spool position determines which ports are pressurised and exhausted. Many valves have a so called rubber seal, which can be compared to a rubber O-ring.
S o l e n oid va lves , mec h a n ica l a n d man u a l va lves SY3000 & -5000 – overview ■ SMC’s new SY3000 and SY5000 series is extremely flexible and versatile. ■ The high flow rate version enables you in many cases to use a smaller valve than usually. ■ See below for an overview of some series with unique advantages.
So l en oid va lves, mechanical a nd ma nua l va lves SY3000 – solenoid valve, plug-in Medium Degree of filtration Max. working pressure Min. working pressure Operating temperature Voltage/power 4 Flow Enclosure Air (dry) 5 µm 0.7 MPa (7 bar); high pressure type: 1 MPa (10 bar) 5/2 monostable: 0.15 MPa (1.5 bar); 5/2 bistable: 0.1 MPa (1 bar); 5/3 with center position: 0.2 MPa (2 bar); double 3/2: 0.15 MPa (1.5 bar); metal seal (not double 3/2): 0.
S o l e n oid va lves , mec h a n ica l a n d man u a l va lves SY3000 – solenoid valve, plug-in Replacement & extension parts Manifold bottom plate End plate D-side, fieldbus Manifold bottom plate – side ported Part number SY30M-2-1SA-C4 SY30M-2-1SA-C6 SY30M-2-1DA-C4 SY30M-2-1DA-C6 Type Single solenoid, Ø4 mm Single solenoid, Ø6 mm Double solenoid, Ø4 mm Double solenoid, Ø6 mm End plate D-side for fieldbus – circular and L connection, with supply and exhaust, side ported, Ø8 mm Part number SY30M-1-1
So l en oid va lves, mechanical a nd ma nua l va lves SY3000 – solenoid valve, plug-in Replacement & extension parts 4 P-shut-off Check valve P-shut-off – for individual valve Double check module Sealing disc Double check module – maintains correct position during long stops Part number SY30M-50-1A Part number SY30M-60-1A Check valve – for exhaust channels Sealing disc Part number SY30M-24-1A Part number SY30M-40-1A SY30M-40-2A Type For P-supply (2 different pressures in manifold) For exhaus
S o l e n oid va lves , mec h a n ica l a n d man u a l va lves SY5000 – solenoid valve, plug-in Medium Degree of filtration Max. working pressure Min. working pressure Operating temperature Voltage/power Flow Enclosure Air (dry) 5 µm 0.7 MPa (7 bar); high pressure type: 1 MPa (10 bar) 5/2 monostable: 0.15 MPa (1.5 bar); 5/2 bistable: 0.1 MPa (1 bar); 5/3 with center position: 0.2 MPa (2 bar); double 3/2: 0.15 MPa (1.5 bar); metal seal (not double 3/2): 0.
So l en oid va lves, mechanical a nd ma nua l va lves SY5000 – solenoid valve, plug-in Replacement & extension parts 4 Manifold bottom plate End plate D-side, fieldbus Manifold bottom plate Part number SY50M-2-1SA-C6 SY50M-2-1SA-C8 SY50M-2-1DA-C6 SY50M-2-1DA-C8 SY50M-2-2SA-C6 SY50M-2-2SA-C8 SY50M-2-2DA-C6 SY50M-2-2DA-C8 and L connection, with supply and exhaust, side ported, Ø10 mm Side ported Side ported Side ported Side ported Bottom ported Bottom ported Bottom ported Bottom ported Manifold bottom
S o l e n oid va lves , mec h a n ica l a n d man u a l va lves SY5000 – solenoid valve, plug-in Replacement & extension parts P-shut-off Check valve P-shut-off – for individual valve Part number SY50M-50-1A Check valve – for exhaust channels Part number SY50M-24-1A Double check module Sealing disc Double check module – maintains correct position during long stops Part number SY50M-60-1A 4 Sealing disc Part number SV2000-59-2A Type For P-supply and exhaust (2 different pressures in manifold) E
So l en oid va lves, mechanical a nd ma nua l va lves VQD1000 – 4/2 solenoid valve Medium Degree of filtration Max. working pressure Min. working pressure Operating temperature Voltage/power Flow Enclosure Manual override LED, surge voltage suppressor 4 Air or neutral gases 5 µm 0.7 MPa (7 bar) 0.0 MPa (0 bar) (vacuum: –100 kPa) –10 to 50 °C 24 V/2 W (high flow type: 3.2 W) 50 ln /min (high flow type: 70 ln /min) IP40 Push button, non-lockable Standard.
S o l e n oid va lves , mec h a n ica l a n d man u a l va lves SYJ3000 – solenoid valve Medium Degree of filtration Max. working pressure Min. working pressure Operating temperature Voltage/power Flow Enclosure Manual override LED, surge voltage suppressor Air, lubricated or not lubricated 5 µm 0.7 MPa (7 bar) 5/2 monostable: 0.15 MPa (1.5 bar); 5/2 bistable: 0.1 MPa (1 bar); 5/3 with center position: 0.2 MPa (2 bar) Up to 50 °C 24 VDC (other voltages on request)/0.
So l en oid va lves, mechanical a nd ma nua l va lves SYJ5000 – solenoid valve Medium Degree of filtration Max. working pressure Min.
S o l e n oid va lves , mec h a n ica l a n d man u a l va lves SYJ5000 – solenoid valve Pilot valve – spare part for valve with blue (and yellow) manual override button, new type Part number V111-5LOU V111-5WAOU V115-5YZ V115-6YZ V115-3YZ V115-4YZ Type Standard (LOU) M8 connector (WAOU) DIN connector (YZ) DIN connector (YZ) DIN connector (YZ) DIN connector (YZ) Connector – standard IP50 with cable Voltage 24 VDC 24 VDC 24 VDC 12 VDC 110 VAC 230 VAC Pilot valve – spare part for valve with orange manual
So l en oid va lves, mechanical a nd ma nua l va lves SYJ7000 – solenoid valve Medium Degree of filtration Max. working pressure Min.
S o l e n oid va lves , mec h a n ica l a n d man u a l va lves SYJ7000 – solenoid valve Pilot valve – spare part for valve with blue (and yellow) manual override button, new type Part number V111-5LOU V111-5WAOU V115-5YZ V115-6YZ V115-3YZ V115-4YZ Type Standard (LOU) M8 connector (WAOU) DIN connector (YZ) DIN connector (YZ) DIN connector (YZ) DIN connector (YZ) Connector – standard IP50 with cable Voltage 24 VDC 24 VDC 24 VDC 12 VDC 110 VAC 230 VAC Pilot valve – spare part for valve with orange manual
So l en oid va lves, mechanical a nd ma nua l va lves SY3000 – solenoid valve Medium Degree of filtration Max. working pressure Min. working pressure Operating temperature Voltage/power Flow Enclosure Manual override LED, surge voltage suppressor 4 ■ Compact: 10 mm Air, lubricated or not lubricated 5 µm 0.7 MPa (7 bar) 5/2 monostable: 0.15 MPa (1.5 bar); 5/2 bistable: 0.1 MPa (1 bar); 5/3 with center position: 0.2 MPa (2 bar) Up to 50 °C 24 VDC ±10% (other voltages on request)/0.
S o l e n oid va lves , mec h a n ica l a n d man u a l va lves SY3000 – solenoid valve Valve – plate assembly, 24 VDC Part number SY3140-5LOU-Q SY3240-5LOU-Q SY3340-5LOU-Q SY3440-5LOU-Q SY3540-5LOU-Q Type 5/2 monostable 5/2 bistable 5/3 closed center 5/3 exhausted center 5/3 pressurized center Weight 51 g 69 g 70 g 70 g 70 g Single sub plate Valve – plate assembly, 24 VDC With M8 connector (IP65) Part number SY3140-5WAOU-Q SY3240-5WAOU-Q SY3340-5WAOU-Q SY3440-5WAOU-Q SY3540-5WAOU-Q Type 5/2 monost
So l en oid va lves, mechanical a nd ma nua l va lves SY5000 – solenoid valve Medium Degree of filtration Max. working pressure Min.
S o l e n oid va lves , mec h a n ica l a n d man u a l va lves SY5000 – solenoid valve Valve – plate assembly, 24 VDC Part number SY5140-5LOU-Q SY5240-5LOU-Q SY5340-5LOU-Q SY5440-5LOU-Q SY5540-5LOU-Q SY5140-5YZ-Q SY5240-5YZ-Q SY5340-5YZ-Q SY5440-5YZ-Q SY5540-5YZ-Q SY5140-5WAOU-Q SY5240-5WAOU-Q SY5340-5WAOU-Q SY5440-5WAOU-Q SY5540-5WAOU-Q Type 5/2 monostable 5/2 bistable 5/3 closed center 5/3 exhausted center 5/3 pressurized center 5/2 monostable 5/2 bistable 5/3 closed center 5/3 exhausted center 5/3
So l en oid va lves, mechanical a nd ma nua l va lves SY7000 – solenoid valve Medium Degree of filtration Max. working pressure Min.
S o l e n oid va lves , mec h a n ica l a n d man u a l va lves SY7000 – solenoid valve Valve – plate assembly, 24 VDC Part number SY7140-5YZ-Q SY7240-5YZ-Q SY7340-5YZ-Q SY7440-5YZ-Q SY7540-5YZ-Q SY7140-5WOU-Q SY7240-5WOU-Q SY7340-5WOU-Q SY7440-5WOU-Q SY7540-5WOU-Q Sub plate – type 42, connection G1/4 Type 5/2 monostable 5/2 bistable 5/3 closed center 5/3 exhausted center 5/3 pressurized center 5/2 monostable 5/2 bistable 5/3 closed center 5/3 exhausted center 5/3 pressurized center Weight 113 g 155
So l en oid va lves, mechanical a nd ma nua l va lves SY9000 – solenoid valve Medium Degree of filtration Max. working pressure Min.
S o l e n oid va lves , mec h a n ica l a n d man u a l va lves SY9000 – solenoid valve Part number: sub plate – type 43, expandable SS5Y9-43- 05 D P/R port output No of valve stations 02 2 stations 20 20 stations U D B U-side For 2–10 stations D-side Båda For 2–20 stations Supply/exhaust Internal pilot (standard) R External pilot S Internal pilot with built-in silencer RS External pilot with built-in silencer 02 03 C8 C10 C12 M - C12 - A/B port size Thread 1/4" 3/8" Push-in, Ø8 mm Push-in,
So l en oid va lves, mechanical a nd ma nua l va lves SY9000 – solenoid valve Port block – with female thread for sub plate type 43 Part number SY9000-58A-02F SY9000-58A-03F Connector – spare part, DIN43650C Connection G1/4 G3/8 Blanking plug – for P, R connection 4 Type Standard (YZ) LED + surge voltage suppressor, 24 VDC (YZ) Connector – for M8 connection Part number SY9000-62-1A Part number WX-83S-6 WX-83S-20 Pilot valve – spare part for valve with blue (and yellow) manual override button, new
S o l e n oid va lves , mec h a n ica l a n d man u a l va lves VF3000 & -5000 – solenoid valve Medium Degree of filtration Max. working pressure Air, lubricated or not lubricated 10 µm 1 MPa (10 bar) 5/2 monostable: 0.15 MPa (1.5 bar); 5/2 bistable: 0.1 MPa (1 bar); 5/3 with center position: 0.15 MPa (1.5 bar) –10 to 50 °C 24 VDC –15 to +10% (other voltages on request)/1.5 W VF3000: 750–870 ln/min; VF5000: 2450 ln/min IP65 Lockable See connectors Min.
So l en oid va lves, mechanical a nd ma nua l va lves SY3060 – valve manifold, cassette type Medium Degree of filtration Max. working pressure Min. working pressure Operating temperature Voltage/power Flow Enclosure Manual override LED, surge voltage suppressor 4 ■ Compact, low weight ➌ D-side Compressed air, lubricated or not lubricated 5 µm 0.7 MPa (7 bar) 5/2 monostable: 0.15 MPa (1.5 bar); 5/2 bistable: 0.1 MPa (1 bar); 5/3 with center position: 0.
S o l e n oid va lves , mec h a n ica l a n d man u a l va lves SY5060 – valve manifold, cassette type Medium Degree of filtration Max. working pressure Compressed air, lubricated or not lubricated 5 µm 0.7 MPa (7 bar) 5/2 monostable: 0.15 MPa (1.5 bar); 5/2 bistable: 0.1 MPa (1 bar); 5/3 with center position: 0.2 MPa (2 bar) Up to 50 °C Standard: 24 VDC ±10% (other voltages on request)/0.4 W (low power: 0.1 W) 450 ln/min Standard: IP65 (IP50 on request) Standard: lockable (push) Standard Min.
So l en oid va lves, mechanical a nd ma nua l va lves SY5060 – valve manifold, cassette type Plug kit Connector Part number SY5000-52-4A Description Plugs for channel 1, 3 and 5 Connection kit – A and B port Part number SY5000-6A-C6 SY5000-6A-C8 SY5000-6A-01F 4 Connection Ø6 mm Ø8 mm G1/8 Part number SY100-30-4A SY100-30-4A-6 SY100-30-4A-10 SY100-30-4A-15 SY100-30-4A-20 SY100-30-4A-25 SY100-30-4A-30 SY100-30-4A-50 SY100-68-A-6 SY100-68-A-30 SY100-61-3-05 V100-49-1-1 V100-49-1-2 V100-49-1-3 V100-49-1
S o l e n oid va lves , mec h a n ica l a n d man u a l va lves SY7060 – valve manifold, cassette type Medium Degree of filtration Max. working pressure Compressed air, lubricated or not lubricated 5 µm 0.7 MPa (7 bar) 5/2 monostable: 0.15 MPa (1.5 bar); 5/2 bistable: 0.1 MPa (1 bar); 5/3 with center position: 0.2 MPa (2 bar) Up to 50 °C Standard: 24 VDC ±10% (other voltages on request)/0.4 W (low power: 0.1 W) 980 ln/min Standard: IP65 (IP50 on request) Standard: lockable (push) Standard Min.
So l en oid va lves, mechanical a nd ma nua l va lves SJ2000 & -3000 – solenoid valve manifold, plug-in, cassette type Medium Degree of filtration Max. working pressure Min. working pressure Operating temperature Voltage/power 4 Flow Enclosure Manual override LED, surge voltage suppressor Compressed air 5 µm 0.7MPa (7bar) 5/2 monostable: 0.15 MPa (1.5 bar) 5/2 bistable: 0.1 MPa (1 bar) 5/3 with center position: 0.2 MPa (2 bar) 5/4 double 3/2: 0.15 MPa (1.
S o l e n oid va lves , mec h a n ica l a n d man u a l va lves SJ2000 & -3000 – solenoid valve manifold, plug-in, cassette type Valve manifold – SJ2000, D-sub connector Part number SS5J2-60FD1-02D SS5J2-60FD1-04D SS5J2-60FD1-06D SS5J2-60FD1-08D SS5J2-60FD1-10D SS5J2-60FD1-12B Type 2 valve stations 4 valve stations 6 valve stations 8 valve stations 10 valve stations 12 valve stations Valve manifold – SJ30001, D-sub connector Part number SS5J3-60FD1-02D SS5J3-60FD1-04D SS5J3-60FD1-06B SS5J3-60FD1-08B SS5J
So l en oid va lves, mechanical a nd ma nua l va lves VQC1000 – solenoid valve, plug-in Medium Degree of filtration Max. working pressure Min. working pressure Operating temperature Voltage/power Flow Enclosure 4 Manual override LED, surge voltage suppressor Air, lubricated or not lubricated (dry) 5 µm 0.7 MPa (7 bar) 5/2 monostable: 0.15 MPa (1.5 bar); 5/2 bistable: 0.1 MPa (1 bar); 5/3 with center position: 0.2 MPa (2 bar); double 3/2: 0.15 MPa (1.5 bar); metal seal (not double 3/2): 0.
S o l e n oid va lves , mec h a n ica l a n d man u a l va lves VQC1000 – solenoid valve, plug-in Individual P-supply Name plate Part number VVQ1000-P-1-C6 Part number VVQ1000-N- = number of valve stations. Blocking disc – supply DIN rail brackets – 1 pair Part number VVQ1000-16A Part number VVQ1000-57A Individual R-exhaust D-sub connector – 25-pin, in accordance with MIL-norm (0.
So l en oid va lves, mechanical a nd ma nua l va lves VQC1000 – solenoid valve, plug-in Part number: valve manifold – for VQC1000 plate assembly/plug-in unit VV5QC 1 1 - 08 C6 FD1 VV5QC 1 1 - 08 C6 SDQ ➊ Plate assembly/plug-in ➌ ➌ Input D-side FD0 FD1 FD2 FD3 PD0 PD1 PD2 PD3 C3 C4 C6 M5 CM L3 L4 L6 L5 B3 B4 B6 B5 LM Push-in, Ø3.2 mm Push-in, Ø4 mm Push-in, Ø6 mm M5 thread Mixed sizes or with port plug Top-connected angle with push-in, Ø3.
S o l e n oid va lves , mec h a n ica l a n d man u a l va lves VQC1000 – solenoid valve, plug-in Exploded view VQC1000 End plate, D-side Valve station, base End plate, U-side EX250 Electrical connection and fieldbus EX500 D-sub Flat cable P connection Single wire T connection L connection M connection Multipole conn. Subject to change Terminal conn.
So l en oid va lves, mechanical a nd ma nua l va lves VQC2000 – solenoid valve, plug-in Medium Degree of filtration Max. working pressure Min. working pressure Operating temperature Voltage/power Flow Enclosure 4 Manual override LED, surge voltage suppressor Air, lubricated or not lubricated (dry) 5 µm 0.7 MPa (7 bar) 5/2 monostable: 0.15 MPa (1.5 bar); 5/2 bistable: 0.1 MPa (1 bar); 5/3 with center position: 0.2 MPa (2 bar); double 3/2: 0.15 MPa (1.5 bar); metal seal (not double 3/2): 0.
S o l e n oid va lves , mec h a n ica l a n d man u a l va lves VQC2000 – solenoid valve, plug-in Sandwichmodul – for individual P-shut-off Name plate Part number VVQ2000-24A-1 Part number VVQ2000-N- = number of valve stations. Blocking disc – supply DIN rail brackets – 1 pair Part number VVQ2000-16A Part number VVQ2000-57A Individual R-exhaust D-sub connector – 25-pin, in accordance with MIL-norm (0.
So l en oid va lves, mechanical a nd ma nua l va lves VQC2000 – solenoid valve, plug-in Part number: valve manifold – for VQC2000 plate assembly/plug-in unit Series VQC2000 ➊ Plate assembly/plug-in ➌ Cylinder port size C4 Push-in, Ø4 mm C6 Push-in, Ø6 mm C8 Push-in, Ø8 mm Mixed sizes CM or with port plug Top-connected angle L4 with push-in, Ø4 mm Top-connected angle L6 with push-in, Ø6 mm Top-connected angle L8 with push-in, Ø8 mm Bottom-connected angle B3 with push-in, Ø3 mm Bottom-connected angle B
S o l e n oid va lves , mec h a n ica l a n d man u a l va lves VQC2000 – solenoid valve, plug-in Exploded view VQC2000 End plate, D-side Valve station, base End plate, U-side EX250 Electrical connection and fieldbus EX500 D-sub Flat cable P connection Single wire T connection L connection M connection Multipole conn. Subject to change Terminal conn.
So l en oid va lves, mechanical a nd ma nua l va lves VQC4000 – solenoid valve, plug-in Medium Degree of filtration Max. working pressure Min. working pressure Operating temperature Voltage/power Flow Enclosure 4 Manual override LED, surge voltage suppressor Air, lubricated or not lubricated (dry) 5 µm 1.0 MPa (10 bar) 5/2 monostable: 0.2 MPa (2 bar); 5/2 bistable: 0.15 MPa (1.5 bar); 5/3 with center position: 0.2 MPa (2 bar); metal seal (all): 0.15 MPa (1.
S o l e n oid va lves , mec h a n ica l a n d man u a l va lves VQC4000 – solenoid valve, plug-in Pressure-controlled check valve – w. manual residual pressure relief Part number VVQ4000-25A-1 D-sub connector – 25-pin, in accordance with MIL-norm (0.3 mm2) Part number VVZS3000-21A-2* VVZS3000-21A-3* VVZS3000-21A-4* Note! Can not be mounted on manifold with external pilot supply.
So l en oid va lves, mechanical a nd ma nua l va lves VQC4000 – solenoid valve, plug-in Part number: valve manifold – for VQC4000 plate assembly/plug-in unit ➎ ➌ Cylinder port size C8 C10 C12 02 03 B Push-in, Ø8 mm Push-in, Ø10 mm Push-in, Ø12 mm Rc1/4 Rc3/8 Bottom-connected Rc1/4 Mixed sizes CM or with port plug ➊ Number of valve stations 01 1 station Maximum number of valve stations depends on chosen electrical connection. See Electrical connection/cable length.
S o l e n oid va lves , mec h a n ica l a n d man u a l va lves VQC4000 – solenoid valve, plug-in Exploded view VQC4000 End plate, D-side Valve station, base End plate, U-side EX600 EX500 4 P conn. D-sub Flat cable Single wire T connection L connection M connection Multipole conn. Subject to change Terminal conn. F conn.
So l en oid va lves, mechanical a nd ma nua l va lves VQ5000 – solenoid valve, plug-in Medium Degree of filtration Max. working pressure Min. working pressure (rubber seal/metal seal) Operating temperature Voltage/power Flow Enclosure Manual override LED, surge voltage suppressor Compressed air, lubricated or not lubricated 5 µm 1.0 MPa (10 bar) 5/2 monostable: 0.2 MPa (2 bar)/0.1 MPa (1 bar); 5/2 bistable: 0.15 MPa (1.5 bar)/0.1 MPa (1 bar); 5/3 with center position: 0.2 MPa (2 bar)/0.15 MPa (1.
S o l e n oid va lves , mec h a n ica l a n d man u a l va lves SV1000 – solenoid valve, cassette type Medium Degree of filtration Max. working pressure Min. working pressure Operating temperature Voltage/power Flow Enclosure Manual override LED, surge voltage suppressor Air, lubricated or not lubricated (dry) 5 µm 0.7 MPa (7 bar) 5/2 monostable: 0.15 MPa (1.5 bar); 5/2 bistable: 0.1 MPa (1 bar); 5/3 with center position: 0.2 MPa (2 bar); double 3/2: 0.15 MPa (1.
So l en oid va lves, mechanical a nd ma nua l va lves Accessories for SV1000 – solenoid valve, tie rod and cassette type Replacement fitting For manifold type 10S Part number VVQ1000-50A- Blocking disc – supply = C3 for Ø3.2 mm; C4 for Ø4 mm; C6 for Ø6 mm.
S o l e n oid va lves , mec h a n ica l a n d man u a l va lves SV2000 – solenoid valve, tie rod type Medium Degree of filtration Max. working pressure Min. working pressure Operating temperature Voltage/power Flow Enclosure Manual override LED, surge voltage suppressor Air, lubricated or not lubricated (dry) 5 µm 0.7 MPa (7 bar) 5/2 monostable: 0.15 MPa (1.5 bar); 5/2 bistable: 0.1 MPa (1 bar); 5/3 with center position: 0.2 MPa (2 bar); double 3/2: 0.15 MPa (1.
So l en oid va lves, mechanical a nd ma nua l va lves SV2000 – solenoid valve, cassette type Medium Degree of filtration Max. working pressure Min. working pressure Operating temperature Voltage/power 4 Flow Enclosure Manual override LED, surge voltage suppressor Air, lubricated or not lubricated (dry) 5 µm 0.7 MPa (7 bar) 5/2 monostable: 0.15 MPa (1.5 bar); 5/2 bistable: 0.1 MPa (1 bar); 5/3 with center position: 0.2 MPa (2 bar); double 3/2: 0.15 MPa (1.
S o l e n oid va lves , mec h a n ica l a n d man u a l va lves Accessories for SV2000 – tie rod and cassette type Replacement fitting For manifold type 10S Part number VVQ1000-51A- Blocking disc – supply = C4 for Ø4 mm; C6 for Ø6 mm; C8 for Ø8 mm.
So l en oid va lves, mechanical a nd ma nua l va lves SV3000 – solenoid valve, plug-in Medium Degree of filtration Max. working pressure Min. working pressure Operating temperature Voltage/power Flow Enclosure Manual override LED, surge voltage suppressor 4 Air, lubricated or not lubricated (dry) 5 µm 0.7 MPa (7 bar) 5/2 monostable: 0.15 MPa (1.5 bar); 5/2 bistable: 0.1 MPa (1 bar); 5/3 with center position: 0.2 MPa (2 bar) Up to 50 °C (dry air) Standard: 24 VDC (12 VDC on request)/0.
S o l e n oid va lves , mec h a n ica l a n d man u a l va lves Accessories & spare parts for SV3000 – solenoid valve, plug-in Replacement fitting Individual P-supply Part number VVQ2000-51A- Part number SV3000-38-1FA = C6 for Ø6 mm; C8 for Ø8 mm; C10 for Ø10 mm.
So l en oid va lves, mechanical a nd ma nua l va lves SV4000 – solenoid valve, plug-in Medium Degree of filtration Max. working pressure Min. working pressure Operating temperature Voltage/power Flow Enclosure Manual override LED, surge voltage suppressor 4 Air, lubricated or not lubricated (dry) 5 µm 0.7 MPa (7 bar) 5/2 monostable: 0.15 MPa (1.5 bar); /2 bistable: 0.1 MPa (1 bar); 5/3 with center position: 0.2 MPa (2 bar) Up to 50 °C (dry air) Standard: 24 VDC (12 VDC on request)/0.
S o l e n oid va lves , mec h a n ica l a n d man u a l va lves Accessories & spare parts for SV4000 – solenoid valve, plug-in Replacement fitting – push-in Part number VVQ4000-50B- Blocking disc – exhaust Part number SY9000-57-1A = C8 for Ø8 mm; C10 for Ø10 mm; C12 for Ø12 mm; 02F for G1/4; 03F for G3/8. Replacement fitting – female thread (G) Part number SY9000-58A- Individual P-supply Part number SV4000-38-1FA Individual R-exhaust = 02F for G1/4; 03F for G3/8.
So l en oid va lves, mechanical a nd ma nua l va lves SV1000, -2000 & -3000 – solenoid valve with ports in valve body Medium Degree of filtration Max. working pressure Min. working pressure Operating temperature Voltage/power 4 Flow Enclosure Manual override LED, surge voltage suppressor Air, lubricated or not lubricated (dry) 5 µm 0.7 MPa (7 bar) 5/2 monostable: 0.15 MPa (1.5 bar); 5/2 bistable: 0.1 MPa (1 bar); 5/3 with center position: 0.2 MPa (2 bar); double 3/2: 0.15 MPa (1.
S o l e n oid va lves , mec h a n ica l a n d man u a l va lves VFN NAMUR – solenoid valve Type Seal Medium Degree of filtration Max. working pressure Min. working pressure Operating temperature Voltage/power Flow Qn Enclosure Manual override LED, surge voltage suppressor VFN3000N VFN2N Rubber seal Metal seal Air, lubricated or not lubricated 10 µm 0.9 MPa (9 bar) 1 MPa (10 bar) 0.15 MPa (1.5 bar) 0.1 MPa (1 bar) –10 to 60 °C (dry air) 24 VDC or 220 VAC/1.
So l en oid va lves, mechanical a nd ma nua l va lves VFS2000 – solenoid valve, plug-in Medium Degree of filtration Smörjning Max. working pressure Min. working pressure 4 Operating temperature Manual override Enclosure Available voltages Voltage tolerance Power consumption Electrical connection Air or neutral gases 5 µm Not required 1 MPa (10 bar) 5/2 (all): 0.1 MPa (1 bar); 5/3 with center position: 0.15 MPa (1.
S o l e n oid va lves , mec h a n ica l a n d man u a l va lves VSR8-4 & VSS8-4 – solenoid valve, plug-in, ISO 15407-2 Medium Degree of filtration Max. working pressure Min. working pressure Operating temperature Voltage/power Flow Enclosure Manual override LED, surge voltage suppressor Air, lubricated or not lubricated (dry) 5 µm 1 MPa (10 bar) 5/2 monostable – metal seal: 0.1 MPa (1 bar); rubber seal: 0.15 MPa (1.5 bar); 5/2 bistable – metal seal: 0.1 MPa (1 bar); rubber seal: 0.
So l en oid va lves, mechanical a nd ma nua l va lves VSR8-4 & VSS8-4 – solenoid valve, plug-in, ISO 15407-2 Part number: valve manifold VV8 01 5 - 03 ➊ Size 01 ➋ Port position and size ➍ Side 1/4 Side 3/8 Bottom and side 1/4 02B with plug in side ➌ T F P conn. 02 03 Port connection code Rc NPTF G1 M conn. 1. According to ISO 1179-1. G thread.
S o l e n oid va lves , mec h a n ica l a n d man u a l va lves EVS7-6 & VQ7-6 – solenoid valve, ISO1 Medium Degree of filtration Max. working pressure Min. working pressure Operating temperature Voltage/power Flow Manual override LED, surge voltage suppressor Air, lubricated or not lubricated 10 µm 0.99 MPa (9.9 bar) 0.
So l en oid va lves, mechanical a nd ma nua l va lves EVS7-6 & VQ7-6 – solenoid valve, ISO1 Connectors – DIN43650 type A Part number A0 A6 A7 Description Standard (black) 24 VDC, LED, surge voltage suppressor 230 VAC, LED, surge voltage suppressor Adapter – DIN43650, for conversion from A to B connector Part number A920002 4 Adapter – 2 × DIN43650B to M12 (A coded); used when replacing existing valve with DIN connector, with valve with M12 connector, without changing existing wiring. Suitable e.g.
S o l e n oid va lves , mec h a n ica l a n d man u a l va lves EVS7-8 & VQ7-8 – solenoid valve, ISO2 Medium Degree of filtration Max. working pressure Min. working pressure Operating temperature Voltage/power Flow Manual override LED, surge voltage suppressor Air, lubricated or not lubricated 10 µm 0.99 MPa (9.9 bar) 0.
So l en oid va lves, mechanical a nd ma nua l va lves EVS7-8 & VQ7-8 – solenoid valve, ISO2 Connectors – DIN43650 type A Part number A0 A6 A7 Description Standard (black) 24 VDC, LED, surge voltage suppressor 230 VAC, LED, surge voltage suppressor Adapter – DIN43650, for conversion from A to B connector Part number A920002 4 Adapter – 2 × DIN43650B to M12 (A coded); used when replacing existing valve with DIN connector, with valve with M12 connector, without changing existing wiring. Suitable e.g.
S o l e n oid va lves , mec h a n ica l a n d man u a l va lves EVS7-10 – solenoid valve, ISO3 Medium Degree of filtration Max. working pressure Min. working pressure Operating temperature Voltage/power Flow Manual override LED, surge voltage suppressor Air, lubricated or not lubricated 10 µm 0.99 MPa (9.9 bar) 0.
So l en oid va lves, mechanical a nd ma nua l va lves EVS7-XSE647 – solenoid valve, ISO Medium Degree of filtration Max. working pressure Min. working pressure Operating temperature Voltage/power Flow Manual override LED, surge voltage suppressor 4 Air, lubricated or not lubricated 10 µm 0.99 MPa (9.9 bar) 0.
S o l e n oid va lves , mec h a n ica l a n d man u a l va lves S070 – 3/2 miniature solenoid valve Medium Degree of filtration Max. working pressure Min. working pressure Operating temperature Voltage/power Flow Enclosure Manual override LED, surge voltage suppressor Air and inert gases 5 µm See table below Vacuum (1.33 × 102 Pa) –10 to 50 °C 3–24 VDC ±10%/0.1–0.
So l en oid va lves, mechanical a nd ma nua l va lves V114 & V111 – solenoid valve Medium Degree of filtration Max. working pressure Min. working pressure Operating temperature Voltage/power Flow Enclosure Manual override LED, surge voltage suppressor 4 Air, lubricated or not lubricated 5 µm 0.7 MPa (7 bar) 0 MPa (0 bar) Up to 50 °C 24 VDC (other voltages on request)/ V11: 0.4 W; V11A: 1.1 W V11: 7.
S o l e n oid va lves , mec h a n ica l a n d man u a l va lves VV100 – 3/2 block mounted solenoid valve, cassette type Medium Degree of filtration Max. working pressure Min. differential pressure Operating temperature Voltage/power Flow Enclosure Manual override Air, lubricated or not lubricated 10 µm Standard: 0.7 MPa (7 bar), contact SMC for more information Down to –100 kPa –10 to 50 °C, no freezing 24 VDC/0.
So l en oid va lves, mechanical a nd ma nua l va lves VV100 – 3/2 block mounted solenoid valve, cassette type Part number: manifold Electrical connection block mounting position: D-side Supply/exhaust block (SUP/EXH) mounting position: U-side VV100 - 10F A D 2 - 05 U 1 - C6 Mounting options Type of D-sub connector A B 4 15 pins 26 pins Direct mounted valve manifold Direction of D-sub With mounting nut M3 × 0.
S o l e n oid va lves , mec h a n ica l a n d man u a l va lves SYJ300, -500 & -700 – 3/2 solenoid valve Medium Degree of filtration Max. working pressure Min. working pressure Operating temperature Voltage/power Enclosure Manual override LED, surge voltage suppressor Air, lubricated or not lubricated 5 µm 0.7 MPa (7 bar) 0.15 MPa (1.5 bar) Up to 50 °C 24 VDC/0.
So l en oid va lves, mechanical a nd ma nua l va lves SYJ300, -500 & -700 – 3/2 solenoid valve Valve SYJ700 – 24 VDC Manifold plate – type 21R, with screws and gasket Part number SYJ712M-5LOU-01F-Q Type Weight 76 g 3/2 normally closed 3/2 normally closed, SYJ712M-5WAOU-01F-Q 80 g M8 connection 3/2 normally closed, SYJ712R-5LOU-01F-X20-Q 76 g external pilot 3/2 normally closed, external SYJ712R-5WAOU-01F-X20-Q 80 g pilot, M8 connection Part number SS3YJ7-21R-02-00F-Q SS3YJ7-21R-03-00F-Q SS3YJ7-21R-04-00
S o l e n oid va lves , mec h a n ica l a n d man u a l va lves EVT307, VO307 & EVT317 – 3/2 solenoid valve Medium Degree of filtration Max. working pressure Min. working pressure Operating temperature Voltage Power consumption Flow Enclosure Manual override Air, lubricated or not lubricated 10 µm 0.9 MPa (9 bar) 0 MPa (0 bar) Up to 50 °C 24 VDC, 220 VAC –15% to +10% DC: 4.8 W; AC (power): 12.7 VA; AC (hold): 7.6 VA EVT-/VO307: 196 ln/min; EVT317: 687 ln/min IP65 Non-lockable See also valve VKF300.
So l en oid va lves, mechanical a nd ma nua l va lves VKF300 – 3 port direct operated solenoid valve Medium Degree of filtration Max. working pressure Min. working pressure Operating temperature Voltage/power Flow Enclosure Manual override LED, surge voltage suppressor 4 Compressed air 5 µm 0.7 MPa (7 bar) 0 MPa (0 bar) (vacuum: –101.2 kPa) Up to 50 °C Standard: 24 VDC (other voltages on request)/4.
S o l e n oid va lves , mec h a n ica l a n d man u a l va lves VP – 3/2 solenoid valve, body ported Medium Degree of filtration Max. working pressure Min. working pressure Operating temperature Ambient temperature Voltage/power Air, lubricated or not lubricated 10 µm 0.7 MPa (7 bar); high pressure 1 MPa (10 bar) 0.2 MPa (2 bar); external pilot –100 kPa –10 to 50 °C –10 to 50 °C 24 VDC/1.
So l en oid va lves, mechanical a nd ma nua l va lves VP – 3/2 solenoid valve, body ported Example NC X Valve, high pressure 1 MPa – 3/2, 24 VDC 4 Part number VP342RK-5YOD1-02FA VP542RK-5YOD1-03FA VP742RK-5YOD1-04FA Weight 190 g 430 g 750 g Conn. G1/4 G3/8 G1/2 Flow 1000 ln/min 2200 ln/min 3600 ln/min Weight 190 g 430 g 750 g Conn.
S o l e n oid va lves , mec h a n ica l a n d man u a l va lves VG342 – solenoid valve, body ported, IP65 Medium Degree of filtration Max. working pressure Min. working pressure Operating temperature Voltage/power Flow Enclosure Manual override LED, surge voltage suppressor Air, lubricated or not lubricated (dry) 5 µm 0.9 MPa (9 bar) Standard: 0.2 MPa (2 bar); external pilot: –101.
So l en oid va lves, mechanical a nd ma nua l va lves VQ20 & -30 – 2/2 solenoid valve Type Medium Degree of filtration Max. working pressure Min. working pressure Operating temperature Voltage/power Flow Enclosure Manual override LED, surge voltage suppressor 4 VQ20 VQ30 Air or neutral gases 5 µm 0.6 MPa (6 bar) 0.5 MPa (5 bar) 0.01 MPa (0.1 bar) –10 to 50 °C (low temperature use requires thoroughly dried air) 24 VDC/2.5 W 24 VDC/2.
S o l e n oid va lves , mec h a n ica l a n d man u a l va lves VM, EVM, EVZM, VHK, VH & VR – mechanical, manual valves Type Medium Degree of filtration Max. working pressure Min. working pressure Operating temperature Flow Connection 3/2 VM1000 3/2 EVM130 5/2 EVZM550 Air, lubricated or not lubricated 10 µm 0.7 MPa 1 MPa (10 bar) (7 bar) 0.15 MPa 0 MPa (0 bar) (1.
So l en oid va lves, mechanical a nd ma nua l va lves VM, EVM, EVZM, VHK, VH & VR – mechanical, manual valves Valve VHK – 3/2 Part number VHK3-04F-04F VHK3-06F-06F VHK3-08F-08F VHK3-10F-10F VHK3-12F-12F VHK3-06F-01S VHK3-08F-02S 1. 4 Connection Ø4 Ø6 Ø8 Ø10 Ø12 Ø6–1/81 Ø8–1/41 Flow 185 ln/min 393 ln/min 529 ln/min 878 ln/min 954 ln/min 393 ln/min 529 ln/min Weight 15 g 16 g 17 g 29 g 32 g 23 g 32 g In-out.
S o l e n oid va lves , mec h a n ica l a n d man u a l va lves SYJA, SYA & VPA – 3/2, 5/2, 5/3 air operated valve Medium Degree of filtration Max. working pressure Min. working pressure Operating temperature Flow Air, lubricated or not lubricated 5 µm 0.71 MPa (7.1 bar) 0.15 MPa (1.
So l en oid va lves, mechanical a nd ma nua l va lves VGA342 – air operated 3/2 valve, body ported Medium Degree of filtration Pilot pressure Min. working pressure Operating temperature Flow Air, lubricated or not lubricated (dry) 5 µm 0.2–0.9 MPa (2–9 bar) 0.2–0.
S o l e n oid va lves , mec h a n ica l a n d man u a l va lves PVQ10 – proportional flow valve Medium Degree of filtration Max. working pressure Max. differential pressure (port 1 to 2) Min. differential pressure Operating temperature Ambient temperature Voltage/power Flow Orifice Enclosure Air and inert gases 80–100 mesh 1.0 MPa (10 bar) See table below 0 MPa (0 bar); vacuum 0.
So l en oid va lves, mechanical a nd ma nua l va lves PVQ30 – proportional flow valve Medium Degree of filtration Max. working pressure Max. differential pressure (port 1 to 2) Min. differential pressure Operating temperature Ambient temperature Voltage/power Flow Orifice Enclosure 4 Air and inert gases 80–100 mesh 1.0 MPa (10 bar) See table below 0 MPa (0 bar)/vacuum 0.
S o l e n oid va lves , mec h a n ica l a n d man u a l va lves LVC – 2/2 air operated chemical valve Model Medium Hygiene Working pressure Pilot pressure Operating temperature Medium temperature Tubing outer diameter Cv factor LVC20 LVC30 LVC40 LVC50 Acids, bases, ultrapure water Packed in clean room class 10,000 at bench class 100 0–0.4 MPa 0–0.5 MPa (0–5 bar) (0–4 bar) 0.3–0.5 MPa (3–5 bar) 0 to 60 °C 0 to 100 °C 6 mm 10 mm 12 mm 19 mm 0.35 1.7 2.5 6 For fittings and tubing, see chapter 10: LQ and TL.
So l en oid va lves, mechanical a nd ma nua l va lves LVH – 2/2 manually operated chemical valve Model Medium Hygiene packaging, clean room Working pressure Design Medium/operating temperature Connection type Tubing outer diameter/port size Cv factor LVH20 LVH30 LVH40 LVH20 LVH30 LVH40 Acids, bases, ultrapure water Class 10,000, bench Class 10,000 class 100 0–0.
S o l e n oid va lves , mec h a n ica l a n d man u a l va lves LVM09/090 – 2/3 port direct operated solenoid valve for chemistry & analysis Type Valve design Valve function Number of ports Medium Working pressure Orifice diameter Flow factor (Cv) Internal volume Isolating diaphragm Weight Power consumption Valve width LVM09/09R3 LVM09R4 LVM095R Direct operated seat valve with isolating diaphragm, lever type NC NO Universal 2 3 Air, water, clean water, solvents and cleaning agents –75 kPa to 0.
So l en oid va lves, mechanical a nd ma nua l va lves LVM15/150 & -20/200 – 2/3 port direct operated solenoid valve for chemistry & analysis Type Valve design Valve function Number of ports Medium Working pressure 4 Orifice diameter Flow factor (Cv) Internal volume Body material Isolating diaphragm Weight Power consumption Valve width Plate assembly LVM15R3 LVM15R4 LVM155R LVM20R3 LVM20R4 LVM205R Direct operated seat valve with isolating diaphragm, lever type NC NO NO Universal NC Universal 2 3 2 3 Air,
S o l e n oid va lves , mec h a n ica l a n d man u a l va lves VDW10, -20 & -30 – 2/2 solenoid valve for water & air Medium Degree of filtration Max. working pressure Min. working pressure Operating temperature Voltage/power Cv factor Enclosure Manual override LED, surge voltage suppressor Water and air Suitable filter: 80–100 mesh 0.9 MPa (9 bar); see table below for detailed information 0.0 MPa (0 bar) 1 to 50 °C 24 VDC, 110 VAC, 230 VAC/ VDW10: 2.5 W; VDW20 & VDW30: 3 W Up to 0.
So l en oid va lves, mechanical a nd ma nua l va lves VDW200 & -300 – 3/2 solenoid valve for water & air Medium Degree of filtration Max. working pressure Min. working pressure Operating temperature Voltage/power Cv factor 4 Enclosure Manual override LED, surge voltage suppressor Water, air, vacuum Suitable filter; 80–100 mesh 0.9 MPa (9 bar); see table below for detailed information 0.0 MPa (0 bar) –10 to 50 °C 24 VDC, 110 VAC, 230 VAC/VDW200: 2.5 W; VDW300: 3 W Up to 0.
S o l e n oid va lves , mec h a n ica l a n d man u a l va lves VCA – solenoid valve for air & inert gases Medium Degree of filtration Max. working pressure Min. working pressure Operating temperature Voltage/power Flow Enclosure Manual override LED, surge voltage suppressor Air and inert gases 5 µm 1 MPa (10 bar); see table below for detailed information 0 MPa (0 bar) –10 to 60 °C (no freezing) 24 VDC (other voltages on request)/ VCA2: 6.5 W; VCA3: 8 W; VCA4: 11.
So l en oid va lves, mechanical a nd ma nua l va lves New VX21, -22 & -23 – normally closed, 2 port direct operated solenoid valve Medium Body material Seal material Degree of filtration Max. static pressure Max. differential pressure Min. differential pressure Medium temperature Ambient temperature 4 Voltage Power consumption Flow factor (Cv/Kv) Enclosure Diode 1.
S o l e n oid va lves , mec h a n ica l a n d man u a l va lves New VX21, -22 & -23 – normally closed, 2 port direct operated solenoid valve Part number: for air Part number: for water, oil, vacuum VX2 1 0 A L A VX2 1 2 A L A G thread Medium: air Voltage G 24 VDC L 230 VAC Size 1 2 Body material A B C D E F H J K L M N A B D E H J L M A B C D E F G H J K L M N Connection 1/8 Aluminium 1/4 Ø6 push-in fitting Plastic Ø8 push-in fitting 1/4 Aluminium 3/8 Ø8 push-in fitting Ø10 push-in fitting Plas
So l en oid va lves, mechanical a nd ma nua l va lves VX21, -22 & -23 – 2 port direct operated solenoid valve 4 Medium Degree of filtration Max. working pressure Min.
S o l e n oid va lves , mec h a n ica l a n d man u a l va lves VX21, -22 & -23 – 2 port direct operated solenoid valve Valve specification (for water and oil) Normally closed (NC) Port size 1/8 (6A) Orifice diameter 2 mm 3 mm 4.5 mm 2 mm 3 mm 4.5 mm 1/4 (8A) 6 mm 8 mm 10 mm 3 mm 4.5 mm 3/8 (10 A) 6 mm 8 mm 10 mm 1/2 (15A) 1.
So l en oid va lves, mechanical a nd ma nua l va lves VX21, -22 & -23 – 2 port direct operated solenoid valve Part number: valves for water and oil Normally closed (NC) Normally open (NO) VX 21 2 0 VX 21 2 2 - 01 - 01 ➌ Model ➊ See table for availability 4 ➍ ➋ Valve versions See table for availability ➌ Solenoid valve (port size) 21 22 23 01 (1/8) — — 02 (1/4) — — — 02 (1/4) 02 (1/4) — 03 (3/8) 03 (3/8) — 04 (1/2) 04 (1/2) Flow capacity, Cv factor Port size symbol (port size) Valve orifice symbol
S o l e n oid va lves , mec h a n ica l a n d man u a l va lves VX21, -22 & -23 – 2 port direct operated solenoid valve Valve specification (for steam) Normally closed (NC) Port size 1/8 (6A) Orifice diameter 2 mm 3 mm 4.5 mm 2 mm 3 mm 4.5 mm 1/4 (8A) 6 mm 8 mm 10 mm 3 mm 4.5 mm 3/8 (10 A) 6 mm 8 mm 10 mm 1/2 (15A) 1.
So l en oid va lves, mechanical a nd ma nua l va lves VX21, -22 & -23 – 2 port direct operated solenoid valve Part number: valves for steam Normally closed (NC) Normally open (NO) VX 21 2 0 VX 21 2 2 - 01 - 01 ➌ Model ➊ See table for availability 4 ➍ ➋ Valve versions See table for availability ➌ Solenoid valve (port size) Port size symbol (port size) Valve orifice symbol (diameter) 2 3 4 5 1 6 (Ø2 mm) (Ø3 mm) (Ø4.
S o l e n oid va lves , mec h a n ica l a n d man u a l va lves VXK21, -22 & -23 – 2 port direct operated solenoid valve with built-in strainer Medium Degree of filtration Max. working pressure Min.
So l en oid va lves, mechanical a nd ma nua l va lves VXK with electronic timer and built-in strainer 4 Medium Air, inert gases, water and neutral media Degree of filtration 100 mesh Max. working pressure 0.9 MPa (9 bar) Min.
S o l e n oid va lves , mec h a n ica l a n d man u a l va lves VXD21 & -22 – pilot operated solenoid valve for water & other neutral media Medium Degree of filtration Max. static pressure Min. differential pressure Max. differential pressure Medium temperature Ambient temperature Voltage Power consumption Flow factor (Cv/Kv) Enclosure Manual override LED, surge voltage suppressor 1. Clean water and neutral media1 Suitable filter: 80–100 mesh 1.5 MPa (15 bar) 0.02 MPa (0.2 bar) VXD2130: 0.
So l en oid va lves, mechanical a nd ma nua l va lves VXZ22 & -23 – zero differential pressure solenoid valve with brass body Medium Degree of filtration Max. static pressure Min. differential pressure Max. differential pressure Medium temperature Ambient temperature Voltage 4 Power consumption Flow factor (Cv/Kv) Enclosure Manual override LED, surge voltage suppressor 1. 2. Clean water and neutral media1 Suitable filter: 80–100 mesh 1.
S o l e n oid va lves , mec h a n ica l a n d man u a l va lves VXZ22 & -23 – zero differential pressure solenoid valve with stainless steel body Medium Degree of filtration Max. static pressure Min. differential pressure Max. differential pressure Medium temperature Ambient temperature Voltage Power consumption Flow factor (Cv/Kv) Enclosure Manual override LED, surge voltage suppressor 1. 2. Water, oil and neutral media1 Suitable filter: 80–100 mesh 1.
So l en oid va lves, mechanical a nd ma nua l va lves VXS22 & -23 – zero differential pressure solenoid valve for steam Medium Max. static pressure Min. differential pressure Max.
S o l e n oid va lves , mec h a n ica l a n d man u a l va lves VNB & VND – 2/2 air operated valve for neutral media or steam Type Medium Degree of filtration Max. working pressure Min. working pressure Operating temperature Ambient temperature Pilot pressure VNB Neutral media 80–100 mesh 1 MPa (10 bar) Vacuum –5 to 99 °C –5 to 60 °C 0.3–0.7 MPa (3–7 bar) VND Steam 0.87 MPa (8.7 bar) 0 MPa (0 bar) –5 to 180 °C Valve VNB – for neutral media Bronze valve body (BC6) with FKM seals Max. diff.
So l en oid va lves, mechanical a nd ma nua l va lves SGC – 2/2 air operated valve for cutting fluids Medium Degree of filtration Provtryck Max. differential pressure (port 1 to 2) Operating temperature Ambient temperature Cutting fluids Use SMC’s industrial filters FG, FGF, FN or equivalent 2.4 MPa (24 bar) 0.5 MPa (5 bar), 1.0 MPa (10 bar) or 1.6 MPa (16 bar) –5 to +60 °C (no freezing) –5 to +50 °C (no freezing) 0.5 MPa-type: 0.25 MPa (2.5 bar) to 0.7 MPa (7 bar); 1.0 and 1.6 MPa-type: 0.
5 Fieldbus 159
Fie ldbu s Contents EX600 – serial interface unit (PROFIBUS DP, DeviceNet, EtherNet/IP, EtherCAT) 162 EX260 – serial interface unit (DeviceNet, PROFIBUS DP, PROFINET, EtherCAT) 165 EX250 – serial interface unit (EtherNet/IP) 166 EX250 – serial interface unit (EtherCAT) 167 EX250 – serial interface unit (PROFIBUS DP) 168 5 EX250 – serial interface unit (DeviceNet) 169 EX250 – serial interface unit (CANopen) 170 EX250 – serial interface unit (AS-Interface) 171 EX9 – output module to EX250 & E
F ie l dbu s Fieldbus system By using fieldbus technology it allows you to configure and control easily, safely and quickly decentralized islands. Installation costs are low when you control the number of solenoid valves with only a 2-wire transmission cable. M any have discovered the benefits of control valves and take in the sensor signals through serial communication (fieldbus).
Fie ldbu s EX600 – serial interface unit (PROFIBUS DP, DeviceNet, EtherNet/IP, EtherCAT) Type Fieldbus protocol Communication speed 5 Configuration files Number of I/O Terminating resistor Power consumption Number of valves Enclosure Moisture Operating temperature Standard EX600-SPR1A EX600-SDN1A EX600-SEN1 DeviceNet: PROFIBUS DP (DP-V0) Volume 1 (Edition 2.1), EtherNet (IEEE802.3) Volume 3 (Edition 1.1) 9.6; 19.2; 45.45; 93.75; 187.5 or 500 kbps; 1.
F ie l dbu s EX600 – serial interface unit (PROFIBUS DP, DeviceNet, EtherNet/IP, EtherCAT) EX600-DXPB Digital input modules Part number EX600-DXPB EX600-DXPC EX600-DXPC1 EX600-DXPD EX600-DXPE EX600-DXPF EX600-DMPF EX600-DYPE Digital output modules Description PNP, M12 (5-pin) 8 inputs (2 inputs/connector) PNP, M8 (3-pin) 8 inputs (1 input/connector) PNP, M8 (3-pin) 8 inputs (1 input/connector) open circuit detection PNP, M12 (5-pin) 16 inputs (2 inputs/connector) PNP, D-sub (25-pin) 16 inputs PNP, sp
Fie ldbu s EX600 – serial interface unit (PROFIBUS DP, DeviceNet, EtherNet/IP, EtherCAT) M12, straight connector M12, angled connector Power cable Part number PCA-1564927 PCA-1564930 PCA-1564943 PCA-1564969 WX-B5S 7/8", straight connector 7/8", angled connector Power cable – 7/8" Description Power supply, M12, straight connector, 2 m cable Power supply, M12, straight connector, 6 m cable Power supply, M12, angled connector, 2 m cable Power supply, M12, angled connector, 6 m cable Power supply, M12 (B
F ie l dbu s EX260 – serial interface unit (DeviceNet, PROFIBUS DP, PROFINET, EtherCAT) Type Fieldbus protocol Configuration files Number of outputs Communication speed Terminating resistor Supply voltage Enclosure Operating temperature Moisture Standard Weight EX260-SPR1/3 EX260-SPR5/7 PROFIBUS DP (DP-V0) GSD-file SPR1: 32; SPR3: 16 SPR5: 32; SPR7: 16 9.6; 19.2; 45.45; 93.75; 187.5 or 500 kbps; 1.
Fie ldbu s EX250 – serial interface unit (EtherNet/IP) Type Protocol Communication speed Supply voltage Power consumption (SI unit) Number of I/O Operating temperature Enclosure Standards EX250-SEN1 EtherNet/IP (ODVA) 10 Mbps; 100 Mbps 21.6–26.4 VDC (node and inputs) 22.8–26.4 VDC (valves) 100 mA (node); max. 1 A (inputs); max.
F ie l dbu s EX250 – serial interface unit (EtherCAT) Type Protocol Supply voltage Power consumption (SI unit) Number of I/O Operating temperature Enclosure Standards EX250-SEN1-X156 EtherCAT 24 VDC ±10% Outputs 24 VDC +10%/–5% 100 mA (node); max. 1 A (inputs); max.
Fie ldbu s EX250 – serial interface unit (PROFIBUS DP) Type Fieldbus protocol Communication speed Supply voltage Power consumption (SI unit) Number of I/O Enclosure Standards EX250-SPR1 PROFIBUS DP 9.6 kbps; 19.2 kbps; 45 kbps, 93.75 kbps; 187.5 kbps; 500 kbps; 1.5 Mbps; 3 Mbps; 6 Mbps; 12 Mbps 24 VDC ±20% (input and control) 24 VDC +10% to –5% (valve) alarm for low voltage is given at approx.
F ie l dbu s EX250 – serial interface unit (DeviceNet) Type Fieldbus protocol Communication speed Supply voltage Power consumption Number of I/O Operating temp./moisture Enclosure Standards EX250-SDN1 DeviceNet (Release 2.
Fie ldbu s EX250 – serial interface unit (CANopen) Type Fieldbus protocol Communication speed Supply voltage Power consumption Number of I/O Operating temperature Enclosure Standards EX250-SCA1A CANopen 10 kbps; 20 kbps; 50 kbps; 125 kbps; 250 kbps; 500 kbps; 800 kbps; 1 Mbps 18–30 VDC (SI unit); 19.2–28.8 VDC (inputs); 22.8–26.4 VDC (valves) 100 mA (SI unit); max. 1 A (inputs); max.
F ie l dbu s EX250 – serial interface unit (AS-Interface) Type Fieldbus protocol Data + power supply (yellow AS-I cable) Supply voltage valve slaves External power supply (black AS-I cable) Max. power consumption (SI unit) Inputs Outputs Number of busy slaves Max. no. of connected slaves Address assignement range Enclosure Standards EX250EX250EX250SAS3 SAS5 SAS7 AS-Interface (AS-I) version 2.11 EX250SAS9 26.5–31.
Fie ldbu s EX9 – output module to EX250 & EX500-Q Type Number of outputs Supply voltage Supply current Power supply Output Enclosure EX9-OET1 EX9-OET2 2 per module 24 VDC Max. 62 mA/output1 From SI unit PNP, –COM NPN, +COM IP67 EX9-OEP1 EX9-OEP2 Max. 0.5 A/output2 From external module EX9-PE13 PNP, –COM NPN, +COM 1. Max. 40 mA (1.0 W) per input with EX500-Q. 2. Max. input current is 3 A per module. 3. Use with power supply module. ■ For connecting external valve, relay, lamp etc.
F ie l dbu s EX500 – serial interface unit (DeviceNet, PROFIBUS DP, EtherNet/IP) Gateway unit EX500-GDN1 DeviceNet (Release 2.0) Fieldbus protocol EX500-GPR1 EX500-GEN1 PROFIBUS DP EtherNet/IP 9,6; 19,2; 93,75; 187,5 or 10 Mbps or 500 kbps; 1,5; 3; 100 Mbps 6 or 12 Mbps 24 VDC ±10 % (min. voltage 20 VDC) 200 mA or less Max. 64 inputs/64 outputs 4 branches (max. 16 inputs/16 outputs per branch) Max.
Fie ldbu s EX500 – serial interface unit (DeviceNet, PROFIBUS DP, EtherNet/IP) Input modules Sensor type Input connectors Supply voltage Signal indicator Insulation Power supply PNP or NPN M8 connector 3-pin or M12 connector 5-pin 24 VDC Green LED Missing Max.
F ie l dbu s EX510 – serial interface unit (PROFIBUS DP, DeviceNet, CC-Link) Type Fieldbus protocol EX510-GPR1 EX510-GDN1 EX510-GMJ1 PROFIBUS DP DeviceNet CC-Link 125 kbps; 250 kbps; 500 kbps; 156 kbps; 625 kbps; 2.5 Mbps; 2.5 Mbps; 5 Mbps; 10 Mbps 21.6–26.4 VDC (GW unit/inputs) 22.8–26.4 VDC (valves) 4.1 A (inputs and GW unit) 6 A (outputs) Max. 64 inputs/max. 64 outputs 4 branches (max. 16 inputs/16 outputs per branch) Max.
Fie ldbu s EX510 – serial interface unit (PROFIBUS DP, DeviceNet, CC-Link) Output unit – SI unit Output type Number of outputs Supply voltage Power consumption Max. last Flat cable – between Gateway and in-/output PNP or NPN 16 24 VDC 50 mA 0.25 A/output; alt. 1.
F ie l dbu s Connectors PLC ➍ ➌ ➍ Terminating resistor at end ➌ ➎ ➊ ➋ ➍ ➊ ➍ ➋ ➏ EX250 ➋ ➊ EX260 EX600 EX500 PROFIBUS cables ➊ ➊ ➋ ➋ Part no Description Part no Description WX-B5S-100P M12 (B coded), female /free end, straight connector, 10 m WX-B5P-3-B5S M12 (B coded), male/female, straight connector, 0.
Fie ldbu s Connectors PLC ➐ ➑ ⓬ ➓ ➒ ➓ ➑ ⓬ ➒ ⓫ ➒ ➐ ➐ EX250 ➐ EX500 5 EX600 EX260 DeviceNet/CANopen cables ➐ ➐ ➑ ➑ Part no Description WX-A5S-100D M12 (A coded), female, straight connector, 10 m ➒ WX-A5S-50D M12 (A coded), female, straight connector, 5 m ➓ EX500-AC050-DN M12 (A coded), male, straight connector, 10 m ⓫ WX-A5P-50D M12 (A coded), male, straight connector, 5 m ⓬ WX-A5P-5-A5S M12 (A coded), male/female, straight connector, 0.
Single acting cylinder with spring return Double acting cylinder Double acting cylinder with magnetic piston for sensors Double acting cylinder with adjustable cushioning at both end positions 6 Double acting cylinder with magnetic piston for sensors and adjustable cushioning at both end positions Rotary actuator Cylinders, rotary actuators and shock absorbers 179
Cyl in de rs, rotary actuators a nd s hock absorbe rs Contents 6 Slide units C85 – ISO cylinder Ø10–25 187 MXS – compact slide table Ø6–25 225 C85K & C85W – ISO cylinder variants Ø10–25 189 MXQ – compact slide table with ball bearing guide Ø6–25 227 GUM – linear guide for ISO cylinder C85 190 MXF – low profile slide table Ø8–20 228 C55 – ISO compact cylinder Ø20–63 191 MXW – slide table Ø12–25 229 CP96 – ISO profile cylinder Ø32–100 194 MXH – miniature slide table Ø6–20 230
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s Miniature cylinders Ø12–25 267 Ø32–100 268 CJP – pin cylinder Ø6–15 248 CQ2X – low speed cylinder CJP2 – pin cylinder Ø4–16 249 CUX – low speed cylinder Ø10–32 269 MQQ – low friction cylinder Ø10–28 270 MQM – low friction cylinder Ø6–25 271 CJ5-S – stainless steel cylinder Ø10–16 272 CG5-S – stainless steel cylinder Ø20–100 273 HYQ – hygienic cylinder Ø20–63 274 Cylinders for direct mounting CUJ – miniature c
Cyl in de rs, rotary actuators a nd s hock absorbe rs MY1C – mechanical joint rodless cylinder Ø16–63 291 MY1MW & MY1CW – cover for mechanical joint rodless cylinder Ø16–40 292 Stopper cylinders RSQ – stopper cylinder Ø12–50 293 RSA – stopper cylinder Ø50–80 295 Rotary clamp cylinders CKZT – power clamp cylinder Ø25–80 296 MK & MK2T – rotary clamp cylinder Ø12–63 297 Escapements 6 MIW & MIS – escapement Ø12–20 298 Ø12–63 299 Stroke reading cylinders CE1 – stroke reading cylinder Rot
Safety Always read before handling These safety instructions are intended to prevent hazardous situations and/or equipment damage. These instructions indicate the level of potential hazard by labeling • Caution!, • W ARNING! or • Danger!. To ensure safety, be sure to observe ISO 44141, JIS B 83702 and other safety practices (EN ISO 13849-13). • Caution! Operator error could result in injury or equipment damage. • W ARNING! Operator error could result in serious injury or loss of life.
Safety, actuators System design • Caution! 1. Pneumatic cylinders can often be linked with other moving parts, this must be taken into account when designing a system. If an external force causes a sudden movement on the part that is joined to the cylinder, the movement can cause danger of injury. 2. If the cylinder is mounted directly adjacent to an area where humans are present, use some form of protective cover for the moving parts.
Safety, actuators 2. If you use a 3-position valve with closed center to maintain a cylinder position, accuracy and precise stop position may be difficult to achieve because of the compressed air compressibility and a valve with zero-leakage can not be guaranteed. This is of particular importance if the valve will hold a cylinder positioned in a fixed position for a long time. Contact SMC if necessary. 3.
Safety, actuators 2. When using auto switch, it is important to ensure that it does not work near strong magnetic fields, for example, directly adjacent to a welding transformer or the like. Use special sensors for this purpose. Maintenance • Danger! 1. Maintenance of a cylinder may be performed only in cases where it is technically possible to remove the cylinder, and then by competent persons. Only spare parts for the current cylinder type may be used.
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s C85 – ISO cylinder Medium Degree of filtration Function Max. working pressure Min. working pressure Piston speed Operating temperature Cushion Air connection Compressed air, lubricated or unlubricated (dry) 5 µm Single acting or double acting 1.0 MPa (10 bar) Ø10–12: 0.08 MPa (0.8 bar); Ø16–25: 0.05 MPa (0.
Cyl in de rs, rotary actuators a nd s hock absorbe rs C85 – ISO cylinder Cylinder – double acting with pneumatic cushion and magnet Cylinder bore 20 mm, piston rod thread M8 Part number Stroke CD85N20-10C-B 10 mm CD85N20-25C-B 25 mm CD85N20-40C-B 40 mm CD85N20-50C-B 50 mm CD85N20-80C-B 80 mm CD85N20-100C-B 100 mm CD85N20-125C-B 125 mm CD85N20-160C-B 160 mm CD85N20-200C-B 200 mm CD85N20-250C-B 250 mm CD85N20-300C-B 300 mm Cylinder bore 25 mm, piston rod thread M10 × 1.
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s C85K & C85W – ISO cylinder variants Medium Degree of filtration Function Max. working pressure Min. working pressure Piston speed Operating temperature Cushion Air connection Non-rotation tolerance Compressed air, lubricated or unlubricated (dry) 5 µm Single acting or double acting 1.0 MPa (10 bar) Ø10–12: 0.08 MPa (0.8 bar); Ø16-25: 0.05 MPa (0.
Cyl in de rs, rotary actuators a nd s hock absorbe rs GUM – linear guide for ISO cylinder C85 ■ Suitable for side loading ■ High non-rotation tolerance For GUL – guide with ball bearings – contact SMC.
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s C55 – ISO compact cylinder Medium Function Max. working pressure Min. working pressure Piston speed Operating temperature Cushion Air connection ISO 21287standard Compressed air, lubricated or unlubricated Double acting 1.0 MPa (10 bar) 0.05 MPa (0.
Cyl in de rs, rotary actuators a nd s hock absorbe rs C55 – ISO compact cylinder Compact cylinder – with magnetic piston Compact cylinder – with magnetic piston Cylinder bore 32, male piston rod thread Cylinder bore 50, male piston rod thread Part number CD55B32-5M CD55B32-10M CD55B32-15M CD55B32-20M CD55B32-25M CD55B32-30M CD55B32-35M CD55B32-40M CD55B32-45M CD55B32-50M CD55B32-60M CD55B32-80M CD55B32-100M CD55B32-125M CD55B32-150M Cylinder bore 40, male piston rod thread 6 Part number CD55B40-5M CD
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s C55 – ISO compact cylinder Brackets Flange 0008 – ISO MF1/MF2 Part number F5032 F5040 F5050 F5063 Cylinder bore 32 mm 40 mm 50 mm 63 mm Foot bracket 0006 – MS1, pair Part number L5032 L5040 L5050 L5063 Cylinder bore 32 mm 40 mm 50 mm 63 mm Angled flange 0035 Part number 0035/32 0035/40 0035/50 0035/63 Cylinder bore 32 mm 40 mm 50 mm 63 mm For 0011 and 0053. Axle 0012 included.
Cyl in de rs, rotary actuators a nd s hock absorbe rs CP96 – ISO profile cylinder Medium Degree of filtration Function Max. working pressure Min. working pressure Piston speed Operating temperature Cushion Air connection Compressed air, lubricated or unlubricated (dry) 5 µm Double acting 1.0 MPa (10 bar) 0.05 MPa (0.
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s CP96 – ISO profile cylinder Cylinder – double acting with magnetic piston Cylinder – double acting with magnetic piston Cylinder bore 80 mm, piston rod thread M20 × 1.
Cyl in de rs, rotary actuators a nd s hock absorbe rs C96 – ISO tie rod cylinder Medium Degree of filtration Function Max. working pressure Min. working pressure Piston speed Operating temperature Cushion Air connection Compressed air, lubricated or unlubricated (dry) 5 µm Double acting 1 MPa (10 bar) 0.05 MPa (0.
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s C96 – ISO tie rod cylinder Cylinder – double acting with magnetic piston Cylinder – double acting with magnetic piston Cylinder bore 80 mm, piston rod thread M20 × 1.
Cyl in de rs, rotary actuators a nd s hock absorbe rs Brackets for CP96 and C96 0008 0017 CP96 0035 0030 0058 0018 -XSE508 0009 -REG MB-S 0006 Back-toback bracket 0058 0009 0002 0057 0050 0011 C96 MB-S 0056 0053 0008 CP96 0076 0053 0006 6 KJ GKM JA Part number 0002/32 0002/40 0002/50 0002/63 Flange 0008 – ISO MF1/MF2 Cylinder bore 32 mm 40 mm 50 mm 63 mm Foot bracket 0006 – MS1, pair Part number L5032 L5040 L5050 L5063 L5080 L5100 L5125 L5160 L5200 L5250 Cylinder bore 32 mm 40 mm
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s Brackets for CP96 and C96 Trunnion 0009REG – MT4, moveable Part number T5032-VERPL. T5040-VERPL. T5050-VERPL. T5063-VERPL. T5080-VERPL. T5100-VERPL. T5125-VERPL. T5160-VERPL. T5200-VERPL. Cylinder bore 32 mm 40 mm 50 mm 63 mm 80 mm 100 mm 125 mm 160 mm 200 mm Only for C96. Preferably ordered with cylinder.
Cyl in de rs, rotary actuators a nd s hock absorbe rs Brackets for CP96 and C96 Rear clevis 0056 Part number DS5032 DS5040 DS5050 DS5063 DS5080 DS5100 DS5125 DS5160-ALU DS5200-ALU Back-to-back bracket Cylinder bore 32 mm 40 mm 50 mm 63 mm 80 mm 100 mm 125 mm 160 mm 200 mm For 0011 and 0053. Axle 0012 included. CETOP RP 107 P 6 Cylinder bore 32 mm 40 mm 50 mm 63 mm 80 mm 100 mm 125 mm 160 mm 200 mm Fits rear clevis 0050.
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s GUM – linear guide for CP96 and C96 ■ Suitable for side loading ■ High non-rotation tolerance For GUL – guide with ball bearings – contact SMC.
Cyl in de rs, rotary actuators a nd s hock absorbe rs CS2 – tie rod cylinder, size 125, 140 and 160 Medium Function Max. working pressure Min.
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s CS2 – tie rod cylinder, size 125, 140 and 160 Brackets – supplied mounted on cylinder Foot bracket L Rear clevis D Cylinder bore 125 mm 140 mm 160 mm Cylinder bore 125 mm 140 mm 160 mm Flange F Axle included. Double knuckle joint – sold separately Cylinder bore 125 mm 140 mm 160 mm Part number Y-12A Y-14A Y-16A Trunnion C Thread M30 × 1.5 M30 × 1.5 M36 × 1.
Cyl in de rs, rotary actuators a nd s hock absorbe rs RQ – compact cylinder with air cushioning Medium Degree of filtration Function Max. working pressure Min. working pressure Piston speed Operating temperature Cushion Air connection Compressed air, lubricated or unlubricated (dry) 5 µm Double acting 1.0 MPa (10 bar) 0.05 MPa (0.5 bar) 50–500 mm/s –10 to 60 °C (without magnet: –10 to 70 °C) Air cushioning, adjustable Ø20–25: M5 × 0.
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s CQS – compact cylinder Medium Degree of filtration Function Max. working pressure Min. working pressure Piston speed Operating temperature Air connection Compressed air, lubricated or unlubricated (dry) 5 µm Single acting or double acting 1.0 MPa (10 bar) 0.07 MPa (0.7 bar) 50–500 mm/s –10 to 60 °C (without magnet: –10 to 70 °C) M5 × 0.
Cyl in de rs, rotary actuators a nd s hock absorbe rs CQS – compact cylinder Cylinder CDQS – double acting with magnetic piston Cylinder CQS – single acting, normally retracted Cylinder bore 25 mm, piston rod thread M6 female Cylinder bore 12 mm, piston rod thread M3 female Part number CDQSB25-5D CDQSB25-10D CDQSB25-15D CDQSB25-20D CDQSB25-25D CDQSB25-30D CDQSB25-35D CDQSB25-40D CDQSB25-45D CDQSB25-50D CDQSB25-75DC CDQSB25-100DC CDQSB25-125DC CDQSB25-150DC CDQSB25-175DC CDQSB25-200DC CDQSB25-250DC CDQS
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s CQ2 – compact cylinder Medium Degree of filtration Function Max. working pressure Min. working pressure Piston speed Operating temperature Air connection Compressed air, lubricated or unlubricated (dry) 5 µm Single acting or double acting 1.0 MPa (10 bar) Ø12–16: 0.07 MPa (0.7 bar); Ø20–100: 0.05 MPa (0.5 bar) 50–500 mm/s –10 to 60 °C (without magnet: –10 to 70 °C) Ø12–25: M5 × 0.
Cyl in de rs, rotary actuators a nd s hock absorbe rs CQ2 – compact cylinder Cylinder CQ2 – double acting without magnetic piston, Cylinder CDQ2 – double acting with magnetic piston, Part number Stroke Connection CQ2B32-5DZ 5 mm M5 CQ2B32TF-10DZ 10 mm G1/8 CQ2B32TF-15DZ 15 mm G1/8 CQ2B32TF-20DZ 20 mm G1/8 CQ2B32TF-25DZ 25 mm G1/8 CQ2B32TF-30DZ 30 mm G1/8 CQ2B32TF-35DZ 35 mm G1/8 CQ2B32TF-40DZ 40 mm G1/8 CQ2B32TF-45DZ 45 mm G1/8 CQ2B32TF-50DZ 50 mm G1/8 CQ2B32TF-75DZ 75 mm G1/8 CQ2B32TF-100DZ 100 mm G1
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s CQ2 – compact cylinder Cylinder CQ2 – double acting without magnetic piston, Cylinder CDQ2 – double acting, with magnetic piston, Part number Stroke Connection CQ2B80TF-10DZ 10 mm G3/8 CQ2B80TF-15DZ 15 mm G3/8 CQ2B80TF-20DZ 20 mm G3/8 CQ2B80TF-25DZ 25 mm G3/8 CQ2B80TF-30DZ 30 mm G3/8 CQ2B80TF-35DZ 35 mm G3/8 CQ2B80TF-40DZ 40 mm G3/8 CQ2B80TF-45DZ 45 mm G3/8 CQ2B80TF-50DZ 50 mm G3/8 CQ2B80TF-75DZ 75 mm G3/8 CQ2B80TF-100DZ 100 mm G3/8 Cyl
Cyl in de rs, rotary actuators a nd s hock absorbe rs CQ2 – compact cylinder Cylinder CQ2 – double acting without magnetic piston, Cylinder CDQ2 – double acting with magnetic piston, Part number Stroke Connection CQ2A32-5DZ 5 mm M5 CQ2A32TF-10DZ 10 mm G1/8 CQ2A32TF-15DZ 15 mm G1/8 CQ2A32TF-20DZ 20 mm G1/8 CQ2A32TF-25DZ 25 mm G1/8 CQ2A32TF-30DZ 30 mm G1/8 CQ2A32TF-35DZ 35 mm G1/8 CQ2A32TF-40DZ 40 mm G1/8 CQ2A32TF-45DZ 45 mm G1/8 CQ2A32TF-50DZ 50 mm G1/8 CQ2A32TF-75DZ 75 mm G1/8 CQ2A32TF-100DZ 100 mm G1
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s CQ2 – compact cylinder Cylinder CQ2 – double acting without magnetic piston, Cylinder CDQ2 – double acting, with magnetic piston, Part number Stroke Connection CQ2A63TF-10DZ 10 mm G1/4 CQ2A63TF-15DZ 15 mm G1/4 CQ2A63TF-20DZ 20 mm G1/4 CQ2A63TF-25DZ 25 mm G1/4 CQ2A63TF-30DZ 30 mm G1/4 CQ2A63TF-35DZ 35 mm G1/4 CQ2A63TF-40DZ 40 mm G1/4 CQ2A63TF-45DZ 45 mm G1/4 CQ2A63TF-50DZ 50 mm G1/4 CQ2A63TF-75DZ 75 mm G1/4 CQ2A63TF-100DZ 100 mm G1/4 Cyl
Cyl in de rs, rotary actuators a nd s hock absorbe rs CQ2 – compact cylinder Part number: double acting cylinder Ø125–200 mm – with threaded through mounting holes CQ2 B 125 - 30 D C CDQ2 B 125 - 30 D C Without magnetic piston With magnetic piston Piston rod thread Built-in magnet Female (standard) M Male Cylinder bore 125 140 160 180 200 125 mm 140 mm 160 mm 180 mm 200 mm Rubber cushion Double acting Standard stroke (mm) 10, 20, 30, 40, 50, 75, 100, 125, 150, 175, 200, 250, 300 6 CQ2 – single ac
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s CQ2 – compact cylinder Sensors and accessories Sensors – 24 VDC For cylinder bore 12–200 mm Part number D-A93L D-M9PWL D-M9PWSAPC D-M9PWSDPC Type Reed, LED, with 3 m cable Electronic PNP, LED (2-colour), with 3 m cable Electronic PNP, M8 connector, LED (2-colour) Electronic PNP, M12 connector, LED (2-colour) Foot bracket – single Part number CQ-L012 CQ-L016 CQ-L020 CQ-L025 CQ-L032 CQ-L040 CQ-L050 CQ-L063 CQ-L080 CQ-L100 Cylinder bore 1
Cyl in de rs, rotary actuators a nd s hock absorbe rs CQ2 – compact cylinder Additional versions Part number: double acting cylinder, additional versions Port thread Version M Ø12–25 Rc Ø32–100 TF G XB6 Heat resistant XB7 Low temperature XC22 FKM seal Heavy duty XC4 piston rod scraper Metal XC35 piston rod scraper XB18 Low friction Intermediate stroke XB10 with custom body length Bore [mm] 12, 16, 20, 25, 32, 40, 50, 63, 80, 100 Piston rod Standard K Non-rotating Through W rod CQ2 Without magnetic pis
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s CQU – compact cylinder Medium Degree of filtration Function Max. working pressure Min. working pressure Piston speed Operating temperature Air connection Compressed air, lubricated or unlubricated (dry) 5 µm Double acting 0.7 MPa (7.0 bar) 0.08 MPa (0.
Cyl in de rs, rotary actuators a nd s hock absorbe rs CVQ – compact cylinder/valve combination Cylinder Degree of filtration Function Max. working pressure Min. working pressure Piston speed Operating temperature Cushion Air connection Valve Valve type Voltage/power Enclosure 5 µm Double acting 0.7 MPa (7 bar) 0.15 MPa (1.5 bar) 50–500 mm/s –10 to 50 °C Rubber cushioning (elastic cushioning) M5 5/2 monostable Standard: 24 VDC (12 VDC on request)/0.4 W (without LED: 0.
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s CQM – short stroke cylinder with guide Medium Degree of filtration Function Max. working pressure Min. working pressure Piston speed Operating temperature Cushion Air connection Compressed air, lubricated or unlubricated 5 µm Double acting 1 MPa (10 bar) Ø12–16: 0.12 MPa (1.2 bar); Ø20–100: 0.
Cyl in de rs, rotary actuators a nd s hock absorbe rs CQM – short stroke cylinder with guide Short stroke cylinder – with magnetic piston Cylinder bore 63 6 Part number CDQMB63TF-10 CDQMB63TF-15 CDQMB63TF-20 CDQMB63TF-25 CDQMB63TF-30 CDQMB63TF-35 CDQMB63TF-40 CDQMB63TF-45 CDQMB63TF-50 CDQMB63TF-75 CDQMB63TF-100 Cylinder bore 80 Stroke 10 mm 15 mm 20 mm 25 mm 30 mm 35 mm 40 mm 45 mm 50 mm 75 mm 100 mm Part number CDQMB80TF-10 CDQMB80TF-15 CDQMB80TF-20 CDQMB80TF-25 CDQMB80TF-30 CDQMB80TF-35 CDQMB80TF-40
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s CLQ – compact cylinder with lock Medium Function Max. working pressure Min. working pressure Piston speed Operating temperature Air connection Unlocking port Unlocking pressure Bore Max. holding force Compressed air, lubricated or unlubricated (dry) Double acting 1.0 MPa (10 bar) 0.1 MPa (1 bar) 50–500 mm/s –10 to 60 °C (without magnet: –10 to 70 °C) Ø20–25: M5 × 0.8; Ø32–40: Rc1/8; Ø50–63: Rc1/4; Ø80–100: Rc3/8 Ø20–25: M5 × 0.
Cyl in de rs, rotary actuators a nd s hock absorbe rs CBQ2 – compact cylinder with end lock Medium Degree of filtration Function Max. working pressure Min. working pressure Piston speed Operating temperature Air connection Backlash Unlocking pressure Bore Max. holding force Compressed air, lubricated or unlubricated (dry) 5 µm Double acting 1.0 MPa (10 bar) 0.05 MPa (0.5 bar) 50–500 mm/s –10 to 60 °C (without magnet: –10 to 70 °C) Ø20–25: M5 × 0.8; Ø32–40: Rc1/8; Ø50–63: Rc1/4; Ø80–100: Rc3/8 2 mm 0.
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s CG1 – round cylinder Medium Function Max. working pressure Min. working pressure Piston speed Operating temperature Cushion Air connection Compressed air, lubricated or unlubricated (dry) Double acting 1.0 MPa (10 bar) 0.05 MPa (0.
Cyl in de rs, rotary actuators a nd s hock absorbe rs CG1 – round cylinder Cylinder – double acting with magnetic piston and air cushioning Cylinder bore 20 mm, piston rod thread M8 × 1.25 Cylinder bore 50 mm, piston rod thread M18 × 1.5 Part number Stroke Connection CDG1BA20-25 25 mm Rc1/8 CDG1BA20-50 50 mm Rc1/8 CDG1BA20-75 75 mm Rc1/8 CDG1BA20-100 100 mm Rc1/8 CDG1BA20-125 125 mm Rc1/8 CDG1BA20-150 150 mm Rc1/8 CDG1BA20-200 200 mm Rc1/8 Cylinder bore 25 mm, piston rod thread M10 × 1.
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s CG1 – round cylinder Brackets Shafts – 2 pcs. Foot bracket – single Part number CG-L020 CG-L025 CG-L032 CG-L040 CG-L050 CG-L063 CG-L080 CG-L100 Cylinder bore 20 mm 25 mm 32 mm 40 mm 50 mm 63 mm 80 mm 100 mm Part number CG-T020 CG-T025 CG-T032 CG-T040 CG-T050 CG-T063 Fits clevis CG--24A.
Cyl in de rs, rotary actuators a nd s hock absorbe rs CG1 – round cylinder Cylinder versions Part number: round cylinder, additional versions Without magnetic piston With magnetic piston CG1 L N 25 CDG1 L N 25 - 100 - 100 Additional versions Q K XB6 Low friction Non-rotating piston rod Heat resistant Low temperature XB7 without air cushioning (with stainless piston rod) XC4 Heavy duty rubber scraper XC35 Metal scraper XC22 FKM seals Built-in magnet Bracket 6 B L F G U T D 1.
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s MXS – compact slide table Medium Degree of filtration Function Max. working pressure Min. working pressure Piston speed Operating temperature Cushion Air connection Guide type Compressed air, lubricated or unlubricated (dry) 5 µm Double acting 0.7 MPa (7.0 bar) 0.15 MPa (1.5 bar) 50–500 mm/s –10 to 60 °C Rubber cushioning on both sides or shock absorber Ø6: M3 × 0.5; Ø8–16: M5 × 0.
Cyl in de rs, rotary actuators a nd s hock absorbe rs MXS – compact slide table Stroke limitation – extension side Part number MXS-AS6 MXS-AS8 MXS-AS12 MXS-AS16 MXS-AS20 MXS-AS25 Hydraulic absorber – extension side Cylinder bore 6 mm 8 mm 12 mm 16 mm 20 mm 25 mm Stroke limitation – retraction side Part number MXS-AT6 MXS-AT8 MXS-AT12 MXS-AT16 MXS-AT20 MXS-AT25 Cylinder bore 6 mm 8 mm 12 mm 16 mm 20 mm 25 mm Sensors – 24 VDC Type Reed, LED, with 3 m cable Electronic PNP, LED (2-colour), with 3 m cable E
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s MXQ – compact slide table with ball bearing guide Medium Degree of filtration Function Max. working pressure Min. working pressure Piston speed Operating temperature Cushion Air connection Guide type Compressed air, lubricated or unlubricated (dry) 5 µm Double acting 0.7 MPa (7.0 bar) 0.15 MPa (1.5 bar) 50–500 mm/s –10 to 60 °C Rubber cushioning on both sides or shock absorber Ø6–16: M5 × 0.
Cyl in de rs, rotary actuators a nd s hock absorbe rs MXF – low profile slide table Medium Degree of filtration Function Max. working pressure Min. working pressure Piston speed Operating temperature Cushion Air connection Guide type Compressed air, lubricated or unlubricated (dry) 5 µm Double acting 0.7 MPa (7.0 bar) 0.15 MPa (1.5 bar) 50–500 mm/s –10 to 60 °C Rubber cushioning on both sides Ø8: M3 × 0.5; Ø12–20: M5 × 0.
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s MXW – slide table Medium Degree of filtration Function Max. working pressure Min. working pressure Piston speed Operating temperature Cushion Air connection Guide type Compressed air, lubricated or unlubricated (dry) 5 µm Double acting 0.7 MPa (7.0 bar) 0.15 MPa (1.5 bar) 50–500 mm/s –10 to 60 °C Rubber cushioning on both sides or shock absorber Ø12–16: M5 × 0.
Cyl in de rs, rotary actuators a nd s hock absorbe rs MXH – miniature slide table Medium Degree of filtration Function Max. working pressure Min. working pressure Piston speed Operating temperature Cushion Air connection Guide type Compressed air, lubricated or unlubricated (dry) 5 µm Double acting 0.7 MPa (7.0 bar) Ø6: 0.12 MPa (1.2 bar); Ø10–16: 0.06 MPa (0.6 bar); Ø20: 0.05 MPa (0.5 bar) 50–500 mm/s –10 to 60 °C Cushioning on both sides M5 × 0.
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s MXP – miniature slide table Medium Degree of filtration Function Max. working pressure Min. working pressure Piston speed Operating temperature Cushion Air connection Guide type Compressed air, lubricated or unlubricated (dry) 5 µm Double acting 0.7 MPa (7.0 bar) Ø6: 0.12 MPa (1.2 bar); Ø10–16: 0.06 MPa (0.6 bar); Ø20: 0.05 MPa (0.5 bar) 50–500 mm/s –10 to 60 °C Rubber cushioning on both sides M5 × 0.8 (MXPJ Ø6: M3 × 0.
Cyl in de rs, rotary actuators a nd s hock absorbe rs MXY – miniature slide table with long stroke Medium Degree of filtration Function Max. working pressure Min. working pressure Piston speed Operating temperature Cushion Air connection Guide type Compressed air, lubricated or unlubricated (dry) 5 µm Double acting 0.55 MPa (5.5 bar) 0.2 MPa (2.
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s MGP – compact guide unit Medium Degree of filtration Function Max. working pressure Min. working pressure Piston speed Operating temperature Cushion Air connection Guide type Non-rotation tolerance Compressed air, lubricated or unlubricated (dry) 5 µm Double acting 1.0 MPa (10 bar) Ø12–16: 0.12 MPa (1.2 bar); Ø20–100: 0.1 MPa (1.
Cyl in de rs, rotary actuators a nd s hock absorbe rs MGP – compact guide unit Compact unit MGPL – ball bearing guide Compact unit MGPM – slide bearing 6 Part number MGPM50TF-25Z MGPM50TF-50Z MGPM50TF-75Z MGPM50TF-100Z MGPM50TF-125Z MGPM50TF-150Z MGPM50TF-175Z MGPM50TF-200Z MGPM50TF-250Z MGPM50TF-300Z MGPM50TF-350Z MGPM50TF-400Z Cylinder bore 63 mm Stroke 25 mm 50 mm 75 mm 100 mm 125 mm 150 mm 175 mm 200 mm 250 mm 300 mm 350 mm 400 mm Connection G1/4 G1/4 G1/4 G1/4 G1/4 G1/4 G1/4 G1/4 G1/4 G1/4 G1/4 G
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s MGP – compact guide unit Compact unit MGPL – ball bearing guide Compact unit MGPL – ball bearing guide Cylinder bore 32 mm Cylinder bore 63 mm Part number MGPL32TF-25Z MGPL32TF-50Z MGPL32TF-75Z MGPL32TF-100Z MGPL32TF-125Z MGPL32TF-150Z MGPL32TF-175Z MGPL32TF-200Z MGPL32-250Z MGPL32-300Z MGPL32-350Z MGPL32-400Z Cylinder bore 40 mm Stroke 25 mm 50 mm 75 mm 100 mm 125 mm 150 mm 175 mm 200 mm 250 mm 300 mm 350 mm 400 mm Connection G1/8
Cyl in de rs, rotary actuators a nd s hock absorbe rs MGP-A – compact guide unit with air cushioning ■ Silent and soft stop 6 Compressed air, lubricated or unlubricated (dry) 5 µm Double acting 1.0 MPa (10 bar) Ø16: 0.15 MPa (1.5 bar); Ø20–100: 0.1 MPa (1.0 bar) Ø16–63: 50–500 mm/s; Ø80–100: 50–400 mm/s –10 to 60 °C Air cushioning on both sides Ø16: M5; Ø20–40: Rc1/8; Ø50–63: Rc1/4; Ø80–100: Rc3/8 Slide bushing or ball bearings Slide bushing: ±0.08° to ±0.04°; ball bearings: ±0.1° to ±0.
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s MGP-A – compact guide unit with air cushioning Compact unit MGPL-A – ball bearing guide Compact unit MGPL-A – ball bearing guide Cylinder bore 16 mm Cylinder bore 50 mm Part number MGPL16-25A MGPL16-50A MGPL16-75A MGPL16-100A Cylinder bore 20 mm Stroke 25 mm 50 mm 75 mm 100 mm Weight 0.56 kg 0.66 kg 0.78 kg 0.
Cyl in de rs, rotary actuators a nd s hock absorbe rs MGPS – heavy duty compact guide unit Medium Degree of filtration Function Max. working pressure Min. working pressure Piston speed Operating temperature Cushion Air connection Guide type Non-rotation tolerance ■ Heavy duty version Compressed air, lubricated or unlubricated (dry) 5 µm Double acting 1.0 MPa (10 bar) 0.1 MPa (1.0 bar) 50–400 mm/s –10 to 60 °C Rubber cushioning on both sides Ø50: Rc1/4; Ø80: Rc3/8 Slide bushing Ø50: ±0.05°; Ø80: ±0.
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s MGPA – high precision compact guide unit Medium Degree of filtration Function Max. working pressure Min. working pressure Piston speed Operating temperature Cushion Air connection Guide type Non-rotation tolerance Compressed air, lubricated or unlubricated (dry) 5 µm Double acting 1.0 MPa (10 bar) Ø12–16: 0.12 MPa (1.2 bar); Ø20–100: 0.1 MPa (1.
Cyl in de rs, rotary actuators a nd s hock absorbe rs MGP-H & MGP-R – compact guide unit with end lock Medium Degree of filtration Function Max. working pressure Min. working pressure Piston speed Operating temperature Cushion Air connection Guide type Non-rotation tolerance Play at lock Unlocking pressure Bore Max. holding force Compressed air, lubricated or unlubricated (dry) 5 µm Double acting 1 MPa (10 bar) 0.
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s MLGP – compact guide unit with piston rod lock Medium Function Max. working pressure Min. working pressure Piston speed Operating temperature Cushion Air connection Guide type Non-rotation tolerance Unlocking pressure Bore Max. holding force Compressed air, lubricated or unlubricated (dry) Double acting 1.0 MPa (10 bar) 0.2 MPa (2.
Cyl in de rs, rotary actuators a nd s hock absorbe rs MGP-XC69 – compact guide unit with shock absorber Medium Degree of filtration Function Max. working pressure Min. working pressure Piston speed Operating temperature Cushion Air connection Guide type Non-rotation tolerance Bore Shock absorber Max. energi Stroke adjustment Compressed air, lubricated or unlubricated (dry) 5 µm Double acting 1.0 MPa (10 bar) Ø12–16: 0.12 MPa (1.2 bar); Ø20–100: 0.1 MPa (1.
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s MGP – compact guide unit, additional versions Part number: compact unit with stroke adjustment ■ Allows adjustment of cylinder stroke ■ XC8 – adjustment of the cylinder extension side ■ XC9 – adjustment of the cylinder retracted side ■ XB10 – intermediate stroke with custom length of the cylinder housing MGP Bore M L - Stroke A - XC8 Stroke adjustment A B 10 mm adjustment 25 mm adjustment Stroke direction XC8 Extension XC9 Ret
Cyl in de rs, rotary actuators a nd s hock absorbe rs MGP – compact guide unit, additional versions Part number: compact unit, low speed version MGP ML ■ Minimum piston speed reduced from 50 to 5 mm/s compared to standard Bore XB13 Stroke - Low speed cylinder Part number: compact unit, water resistant design ■ Special seals provide added protection in wet environments ■ Seals can be ordered in NBR or FKM MGPM Bore Y7BAL Water resistant 2-color indicator, electronic sensors Water resistant cy
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s MGF – lift table Medium Degree of filtration Function Max. working pressure Min. working pressure Piston speed Operating temperature Cushion Air connection Guide type Turntable rotation Compressed air, lubricated or unlubricated (dry) 5 µm Double acting 1.0 MPa (10 bar) 0.1 MPa (1.0 bar) 20–200 mm/s –10 to 60 °C Rubber cushioning on both sides Ø40: 1/8; Ø63–80: 1/4 Slide bushing Ø40: ±0.08°; Ø63: ±0.06°; Ø80: ±0.
Cyl in de rs, rotary actuators a nd s hock absorbe rs MGZ – non-rotating double power cylinder Medium Degree of filtration Function Max. working pressure Min. working pressure Piston speed Operating temperature Cushion Air connection Non-rotation tolerance Compressed air, lubricated or unlubricated (dry) 5 µm Double acting 1.0 MPa (10 bar) Standard stroke: 0.08 MPa (0.8 bar); long stroke: 0.12 MPa (1.
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s MGZ – non-rotating double power cylinder Non-rotating double power cylinder – double acting with magnetic piston Cylinder bore 50 mm with four M8 threads in piston rod Part number Stroke Connection MGZ50TF-75 75 mm G1/4 MGZ50TF-100 100 mm G1/4 MGZ50TF-125 125 mm G1/4 MGZ50TF-150 150 mm G1/4 MGZ50TF-175 175 mm G1/4 MGZ50TF-200 200 mm G1/4 MGZ50TF-250 250 mm G1/4 MGZ50TF-300 300 mm G1/4 MGZ50TF-350 350 mm G1/4 MGZ50TF-400 400 mm G1/4 MG
Cyl in de rs, rotary actuators a nd s hock absorbe rs CJP – pin cylinder Medium Degree of filtration Function Max. working pressure Min. working pressure Piston speed Operating temperature Cushion Air connection Compressed air, lubricated or unlubricated (dry) 5 µm Single acting with spring return 0.7 MPa (7 bar) Ø6: 0.12 MPa (1.2 bar); Ø10–15: 0.06 MPa (0.
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s CJP2 – pin cylinder Medium Degree of filtration Function Max. working pressure Min. working pressure Piston speed Operating temperature Cushion Air connection Compressed air, lubricated or unlubricated (dry) 5 µm Double acting 0.7 MPa (7.0 bar) Ø6: 0.12 MPa (1.2 bar); Ø16: 0.06 MPa (0.
Cyl in de rs, rotary actuators a nd s hock absorbe rs CUJ – miniature cylinder Medium Degree of filtration Function Max. working pressure Min. working pressure Piston speed Operating temperature Air connection Compressed air, lubricated or unlubricated (dry) 5 µm Single acting or double acting 0.7 MPa (7.0 bar) Double acting – Ø4–8: 0.15 MPa (1.5 bar); Ø10: 0.1 MPa (1.0 bar) Single acting – Ø4: 0.35 MPa (3.5 bar); Ø6–8: 0.3 MPa (3 bar); Ø10: 0.
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s CUJ – miniature cylinder Double acting cylinder Double acting cylinder – with magnetic piston Cylinder bore 4 mm, piston rod diameter 2 mm Cylinder bore 6 mm, piston rod thread M2.5 female Part number Stroke CUJB4-4D 4 mm CUJB4-6D 6 mm CUJB4-8D 8 mm CUJB4-10D 10 mm Cylinder bore 6 mm, piston rod thread M2.
Cyl in de rs, rotary actuators a nd s hock absorbe rs CU – direct mounted cylinder with air cushioning Medium Degree of filtration Function Max. working pressure Min. working pressure Piston speed Operating temperature Cushion Air connection Compressed air, lubricated or unlubricated (dry) 5 µm Double acting 0.7 MPa (7.0 bar) 0.08 MPa (0.8 bar) 50–500 mm/s –10 to 60 °C (without magnet: –10 to 70 °C) Air cushioning on both sides Ø20–25: M5; Ø32 G1/8 ■ Approx. 2.
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s CDU – direct mounted cylinder Medium Degree of filtration Function Max. working pressure Min. working pressure Piston speed Operating temperature Cushion Air connection Compressed air, lubricated or unlubricated (dry) 5 µm Double acting 0.7 MPa (7.0 bar) Ø6–16: 0.06 MPa (0.6 bar); Ø20–32: 0.05 MPa (0.5 bar) 50–500 mm/s –10 to 60 °C (without magnet: –10 to 70 °C) Rubber cushioning on both sides Ø6–16: M5 × 0.
Cyl in de rs, rotary actuators a nd s hock absorbe rs ZCDUK – cylinder for vacuum Medium Degree of filtration Function Max. working pressure Min. working pressure Piston speed Operating temperature Cushion Air connection Compressed air, lubricated or unlubricated (dry) 5 µm Double acting 0.7 MPa (7.0 bar) Ø10–16: 0.07 MPa (0.7 bar); Ø20–32: 0.06 MPa (0.6 bar) 50–500 mm/s –20 to 60 °C Rubber cushioning on both sides Ø10–20: M5 × 0.
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s MTS – precision cylinder Medium Degree of filtration Function Max. working pressure Min. working pressure Piston speed Operating temperature Cushion Non-rotation tolerance Compressed air, lubricated or unlubricated (dry) 5 µm Double acting 0.7 MPa (7.0 bar) 0.12 MPa (1.2 bar) (Ø8: 0.15 MPa [1.5 bar]) 50–800 mm/s (Ø8: 50–500 mm/s) –10 to 60 °C Air cushioning (Ø8: rubber cushioning) 0.1° (Ø8: 0.
Cyl in de rs, rotary actuators a nd s hock absorbe rs CXS – dual rod cylinder Medium Degree of filtration Function Max. working pressure Min. working pressure Piston speed Adjustable stroke Operating temperature Cushion Air connection Guide type Non-rotation tolerance 1. Compressed air, lubricated or unlubricated (dry) 5 µm Double acting 0.7 MPa (7.0 bar) Ø6: 0.015 MPa (0.15 bar); Ø10–15: 0.1 MPa (1.0 bar); Ø20–32: 0.05 MPa (0.
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s CXS-R – dual rod cylinder with end lock Medium Degree of filtration Function Max. working pressure Min. working pressure Piston speed Operating temperature Cushion Air connection Guide type 1. Compressed air, lubricated or unlubricated (dry) 5 µm Double acting 0.7 MPa (7.0 bar) 0.3 MPa (3.0 bar) Ø6: 30–300 mm/s; Ø10: 30–800 mm/s; Ø15–20: 30–700 mm/s; Ø25–32: 30–600 mm/s –10 to 60 °C Air cushioning Ø6–20: M5 × 0.
Cyl in de rs, rotary actuators a nd s hock absorbe rs CXS-A – dual rod cylinder with air cushioning Medium Degree of filtration Function Max. working pressure Min. working pressure Piston speed Operating temperature Cushion Air connection Guide type 1. Compressed air, lubricated or unlubricated (dry) 5 µm Double acting 0.7 MPa (7.0 bar) 0.1 MPa (1.0 bar) 50–1000 mm/s –10 to 60 °C Air cushioning Ø20: M5 × 0.8; Ø25–32: G1/8 Slide bushing or ball bearing1 For cylinder with ball bearings, CXSL, contact SMC.
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s CXSJ – compact dual rod cylinder Medium Degree of filtration Function Max. working pressure Min. working pressure Piston speed Operating temperature Cushion Air connection Guide type 1. Compressed air, lubricated or unlubricated (dry) 5 µm Double acting 0.7 MPa (7.0 bar) Ø6: 0.15 MPa (1.5 bar); Ø10: 0.1 MPa (1.0 bar) 30–800 mm/s –10 to 60 °C Rubber cushioning on both sides Ø6: M3 × 0.5; Ø10: M5 × 0.
Cyl in de rs, rotary actuators a nd s hock absorbe rs CXSW – dual rod cylinder with through rod Medium Degree of filtration Function Max. working pressure Min. working pressure Piston speed Operating temperature Cushion Air connection Guide type Non-rotation tolerance 1. Compressed air, lubricated or unlubricated (dry) 5 µm Double acting 0.7 MPa (7.0 bar) Ø6–15: 0.15 MPa (1.5 bar); Ø20–32: 0.1 MPa (1.0 bar) 50–500 mm/s –10 to 60 °C Rubber cushioning on both sides Ø10–20: M5 × 0.
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s CY3 – magnetically coupled rodless cylinder Medium Degree of filtration Function Max. working pressure Min. working pressure Piston speed Operating temperature Cushion Air connection Guide type Compressed air, lubricated or unlubricated (dry) 5 µm Double acting 0.7 MPa (7.0 bar) 0.18 MPa (1.
Cyl in de rs, rotary actuators a nd s hock absorbe rs CY1S – magnetically coupled rodless cylinder Medium Degree of filtration Function Max. working pressure Min. working pressure Piston speed Operating temperature Cushion Air connection Guide type Compressed air, lubricated or unlubricated (dry) 5 µm Double acting 0.7 MPa (7.0 bar) 0.18 MPa (1.
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s CY1L – magnetically coupled rodless cylinder Medium Degree of filtration Function Max. working pressure Min. working pressure Piston speed Operating temperature Cushion Air connection Guide type Compressed air, lubricated or unlubricated (dry) 5 µm Double acting 0.7 MPa (7.0 bar) 0.18 MPa (1.8 bar) 50–1000 mm/s –10 to 60 °C Rubber cushioning on both sides or shock absorbers Ø6–15: M5 × 0.
Cyl in de rs, rotary actuators a nd s hock absorbe rs RHC – high power cylinder Medium Degree of filtration Function Max. working pressure Min. working pressure Piston speed Operating temperature Cushion Air connection Compressed air, lubricated or unlubricated (dry) 5 µm Double acting 1.0 MPa (10 bar) 0.05 MPa (0.
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s REC – sine cylinder Medium Degree of filtration Function Max. working pressure Min. working pressure Piston speed Operating temperature Cushion Air connection Compressed air, lubricated or unlubricated (dry) 5 µm Double acting 1.0 MPa (10.0 bar) 0.2 MPa (2.
Cyl in de rs, rotary actuators a nd s hock absorbe rs CJ2X – low speed cylinder Medium Degree of filtration Function Max. working pressure Min. working pressure Piston speed Operating temperature Cushion Air connection ■ ■ ■ ■ Compressed air, lubricated or unlubricated (dry) 5 µm Double acting 0.7 MPa (7.0 bar) 0.06 MPa (0.6 bar) 1–300 mm/s –10 to 60 °C (without magnet: –10 to 70 °C) Rubber cushioning on both sides M5 × 0.8 Starting pressure 50% lower than standard ■ Speed down to 0.
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s CQSX – low speed cylinder Medium Degree of filtration Function Max. working pressure Piston speed Operating temperature Air connection Compressed air, lubricated or unlubricated (dry) 5 µm Double acting 1.0 MPa (1.5 bar) Ø12–16: 1–300 mm/s; Ø20–40: 0.5–300 mm/s –10 to 60 °C (without magnet: –10 to 70 °C) Ø12–25: M5 × 0.8; Ø32–40: Rc1/8 ■ Starting pressure 50% lower than standard ■ Speed down to 0.
Cyl in de rs, rotary actuators a nd s hock absorbe rs CQ2X – low speed cylinder Medium Degree of filtration Function Max. working pressure Piston speed Operating temperature Air connection Compressed air, lubricated or unlubricated (dry) 5 µm Double acting 1.0 MPa (1.5 bar) Ø12–16: 1–300 mm/s; Ø20–40: 0.5–300 mm/s –10 to 60 °C (without magnet: –10 to 70 °C) Ø12–25: M5 × 0.8; Ø32–40: Rc1/8 ■ Starting pressure 50% lower than standard ■ Speed down to 0.
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s CUX – low speed cylinder Medium Degree of filtration Function Max. working pressure Piston speed Operating temperature Cushion Air connection ■ ■ ■ ■ Compressed air, lubricated or unlubricated (dry) 5 µm Double acting 0.7 MPa (7.0 bar) Ø10–16: 1–300 mm/s; Ø20–32: 0.5–300 mm/s –10 to 60 °C (without magnet: –10 to 70 °C) Rubber cushions on both sides Ø6–16: M5 × 0.8; Ø32: G1/8 Starting pressure 50% lower than standard ■ Speed down to 0.
Cyl in de rs, rotary actuators a nd s hock absorbe rs MQQ – low friction cylinder Medium Degree of filtration Function Max. working pressure Min. working pressure Piston speed Operating temperature Cushion Air connection Allowed leakage Compressed air, unlubricated (dry) 0.3 µm (micro filter) Double acting metal seal cylinder 0.5 MPa (5.0 bar) (MQQL: 0.7 MPa [7.0 bar]) 0.005 MPa (0.05 bar) 0.3–300 mm/s (MQQL: 0.3–500 mm/s) –10 to 80 °C Rubber cushions on both sides Ø10–20: M5 × 0.
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s MQM – low friction cylinder Medium Degree of filtration Function Max. working pressure Min. working pressure Piston speed Operating temperature Cushion Air connection Allowed leakage Compressed air, unlubricated (dry) 0.3 µm (micro filter) Double acting metal seal cylinder 0.70 MPa (7.0 bar) 0.005 MPa (0.05 bar) (Ø6: 0.02 MPa [0.2 bar]; high speed version: 0.01 MPa [0.1 bar]) 0.
Cyl in de rs, rotary actuators a nd s hock absorbe rs CJ5-S – stainless steel cylinder Medium Degree of filtration Function Max. working pressure Min. working pressure Piston speed Operating temperature Cushion Air connection Compressed air, unlubricated (dry) 5 µm Double acting 0.7 MPa (7.0 bar) 0.1 MPa (1.0 bar) 50–750 mm/s –10 to 60 °C (without magnet: –10 to 70 °C) Rubber cushions on both sides M5 × 0.8 ■ Contains grease approved by the FDA (U.S.
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s CG5-S – stainless steel cylinder Medium Degree of filtration Function Max. working pressure Min. working pressure Piston speed Operating temperature Cushion Air connection Compressed air, unlubricated (dry) 5 µm Double acting 1.0 MPa (10.0 bar) 0.05 MPa (0.
Cyl in de rs, rotary actuators a nd s hock absorbe rs HYQ – hygienic cylinder ■ Hygienic designed cylinder for the food industry and others ■ Unique sealing concept that gives significantly longer life in wet applications Part number: hygienic cylinder Without sensor With sensor HYQB 20 HYDQB 20 R - 50 F M R - 50 F M With sensor (magnet) Piston rod thread Female M Male Cylinder bore 20 25 32 40 50 63 6 20 mm 25 mm 32 mm 40 mm 50 mm 63 mm Type of lubrication Standard grease F Food grease Stroke (mm
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s HYC – ISO/VDMA hygienic cylinder ■ Hygienic designed cylinder for the food industry and others ■ Unique sealing concept that gives significantly longer life in wet applications Part number: ISO/VDMA hygienic cylinder Without sensor With sensor HYCB 32 HYDCB 32 R - 500 F R - 500 F With sensor (magnet) Type of lubrication Standard grease F Food grease Cylinder bore 32 40 50 63 32 mm 40 mm 50 mm 63 mm Stroke (mm) Seal material Port t
Cyl in de rs, rotary actuators a nd s hock absorbe rs HYG – hygienic compact guide unit ■ Hygienic designed cylinder for the food industry and others ■ Unique sealing concept that gives significantly longer life in wet applications Part number: compact unit Without sensor With sensor HYG 20 HYDG 20 R - 50 F R - 50 F With sensor (magnet) Type of lubrication Standard grease F Food grease Cylinder bore 6 20 25 32 40 50 63 20 mm 25 mm 32 mm 40 mm 50 mm 63 mm Stroke (mm) Seal material R NBR H FKM Port
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s MLU – oval piston cylinder with lock Medium Degree of filtration Function Max. working pressure Min. working pressure Piston speed Operating temperature Cushion Air connection Sizes corresponding to Compressed air, lubricated or unlubricated (dry) 5 µm Double acting piston rod cylinder 0.7 MPa (7.0 bar) 0.2 MPa (2.
Cyl in de rs, rotary actuators a nd s hock absorbe rs MY3 – mechanical joint rodless cylinder Medium Degree of filtration Function Max. working pressure Min. working pressure Piston speed Operating temperature Cushion Air connection Compressed air, lubricated or unlubricated (dry) 5 µm Double acting 0.8 MPa (8.0 bar) 0.15 MPa (1.
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s MY3 – mechanical joint rodless cylinder Max. allowed load and moment Load cases Moment (Nm) M1 = F 1 · L 1 F1 L1 F1 Force (N) M1 F1 M2 = F 2 · L 2 L2 F2 M2 F2 M3 = F 3 · L 3 F2 L3 F3 M3 F3 F: Force affecting the carriage (N) (for example load). L: Distance between the carriage surface and point of force (m) (at load = centre of gravity). M: Moment affecting the carriage (Nm). F3 At piston speed max. 200 mm/s.
Cyl in de rs, rotary actuators a nd s hock absorbe rs MY3M – mechanical joint rodless cylinder Piston speed Operating temperature Cushion Air connection Air Double acting 0.15–0.7 MPa (1.5–7 bar) 1.05 MPa (10.
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s MY3M – mechanical joint rodless cylinder Max. allowed load and moment Load cases Moment (Nm) M1 = F 1 · L 1 F1 L1 F1 Force (N) M1 Cylinder bore 16 mm 25 mm 40 mm 63 mm F1 M2 = F 2 · L 2 L2 F2 M2 At piston speed max. 200 mm/s. At higher speed, contact SMC. Max. allowed moment (Nm) M1 M2 M3 5 3 1.4 16 9 4 60 24 20 140 60 54 Max.
Cyl in de rs, rotary actuators a nd s hock absorbe rs MY2C – mechanical joint rodless cylinder Medium Degree of filtration Function Max. working pressure Min. working pressure Piston speed Operating temperature Cushion Air connection Compressed air, lubricated or unlubricated (dry) 5 µm Double acting 0.8 MPa (8.0 bar) 0.1 MPa (1.
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s MY2H – mechanical joint rodless cylinder Medium Degree of filtration Function Max. working pressure Min. working pressure Piston speed Operating temperature Cushion Air connection Guide type Compressed air, lubricated or unlubricated (dry) 5 µm Double acting 0.8 MPa (8.0 bar) 0.1 MPa (1.
Cyl in de rs, rotary actuators a nd s hock absorbe rs MY2HT – mechanical joint rodless cylinder Medium Degree of filtration Function Max. working pressure Min. working pressure Piston speed Operating temperature Cushion Air connection Compressed air, lubricated or unlubricated (dry) 5 µm Double acting 0.8 MPa (8.0 bar) 0.1 MPa (1.
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s MY1B – mechanical joint rodless cylinder Medium Degree of filtration Function Max. working pressure Min. working pressure Piston speed Operating temperature Cushion Air connection Guide type Compressed air, lubricated or unlubricated (dry) 5 µm Double acting 0.8 MPa (8.0 bar) 0.1 MPa (1.0 bar); Ø10: 0.2 MPa (2.
Cyl in de rs, rotary actuators a nd s hock absorbe rs MY1B – mechanical joint rodless cylinder Mechanical joint rodless cylinder Mechanical joint rodless cylinder Cylinder bore 32 mm 6 Cylinder bore 63 mm Part number MY1B32G-100 MY1B32G-200 MY1B32G-300 MY1B32G-400 MY1B32G-500 MY1B32G-600 MY1B32G-700 MY1B32G-800 MY1B32G-900 MY1B32G-1000 MY1B32G-1200 MY1B32G-1400 MY1B32G-1600 MY1B32G-1800 MY1B32G-2000 Cylinder bore 40 mm Stroke 100 mm 200 mm 300 mm 400 mm 500 mm 600 mm 700 mm 800 mm 900 mm 1000 mm 1200
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s MY1B – mechanical joint rodless cylinder Max. allowed load and moment Load cases Moment (Nm) M1 = F 1 · L 1 F1 L1 F1 Force (N) M1 F1 M2 = F 2 · L 2 L2 F2 M2 F2 M3 = F 3 · L 3 F2 L3 F3 M3 F3 F: Force affecting the carriage (N) (for example load). L: Distance between the carriage surface and point of force (m) (at load = centre of gravity). M: Moment affecting the carriage (Nm).
Cyl in de rs, rotary actuators a nd s hock absorbe rs MY1M – mechanical joint rodless cylinder Medium Degree of filtration Function Max. working pressure Min. working pressure Piston speed Operating temperature Cushion Air connection Guide type Compressed air, lubricated or unlubricated (dry) 5 µm Double acting 0.8 MPa (8.0 bar) 0.1 MPa (1.0 bar) 100–1500 mm/s (100–1000 mm/s if only air cushioning is used) 5 to 60 °C Air cushioning, adjustable Ø16–20: M5 × 0.
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s MY1M – mechanical joint rodless cylinder Mechanical joint rodless cylinder Mechanical joint rodless cylinder Cylinder bore 40 mm Cylinder bore 63 mm Part number MY1M40G-100 MY1M40G-200 MY1M40G-300 MY1M40G-400 MY1M40G-500 MY1M40G-600 MY1M40G-700 MY1M40G-800 MY1M40G-900 MY1M40G-1000 MY1M40G-1200 MY1M40G-1400 MY1M40G-1600 MY1M40G-1800 MY1M40G-2000 Cylinder bore 50 mm Part number MY1M50G-100 MY1M50G-200 MY1M50G-300 MY1M50G-400 MY1M50G-500
Cyl in de rs, rotary actuators a nd s hock absorbe rs MY1M – mechanical joint rodless cylinder Adjustment bolt – for stroke adjustment Part number MYM-A16A MYM-A20A MYM-A25A MYM-A32A MYM-A40A MYM-A50A MYM-A63A Cylinder bore 16 mm 20 mm 25 mm 32 mm 40 mm 50 mm 63 mm Stroke adjustment + shock absorbers Part number MYM-A20H MYM-A25H MYM-A32H MYM-A40H MYM-A50H MYM-A63H 6 Cylinder bore 20 mm 25 mm 32 mm 40 mm 50 mm 63 mm Cylinder bracket – side bracket A Part number MY-S16A MY-S20A MY-S25A MY-S32A MY-S40A
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s MY1C – mechanical joint rodless cylinder Medium Degree of filtration Function Max. working pressure Min. working pressure Compressed air, lubricated or unlubricated (dry) 5 µm Double acting 0.8 MPa (8.0 bar) 0.1 MPa (1.0 bar) 100–1500 mm/s (100–1000 mm/s if only air cushioning is used) 5 to 60 °C Air cushioning, adjustable Ø16–20: M5 × 0.
Cyl in de rs, rotary actuators a nd s hock absorbe rs MY1MW & MY1CW – cover for mechanical joint rodless cylinder ■ ■ ■ ■ ■ ■ Custom cover for MY1M/MY1C rodless cylinders Adapted to the cylinder stroke Protection against splashes Suitable for use in dusty environments Can be retrofitted Compact design Cover – for mounting on existing MY1M or MY1C cylinder, including housing, slide table, end plate and necessary mounting accessories Part number MYMW-16- MYMW-20- MYMW-25- MYMW-32- MYMW-40- 6 Bore 16
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s RSQ – stopper cylinder Medium Degree of filtration Function Max. working pressure Min. working pressure Operating temperature Cushion Air connection Compressed air, lubricated or unlubricated (dry) 10 µm Single acting/double acting 1.0 MPa (10 bar) 0.1 MPa (1.
Cyl in de rs, rotary actuators a nd s hock absorbe rs RSQ – stopper cylinder Theoretical force (N) – double acting Sensors – 24 VDC For cylinder bore 12 and 32–50 mm At pressure 0.3–0.
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s RSA – stopper cylinder Medium Degree of filtration Function Max. working pressure Operating temperature Cushion Air connection Compressed air, lubricated or unlubricated (dry) 5 µm Single acting/double acting/ double acting with spring 1.
Cyl in de rs, rotary actuators a nd s hock absorbe rs CKZT – power clamp cylinder ■ Ø25, 40, 50, 63 and 80 ■ Each size has three arm styles ■ Spatter proof and water resistant Rounded cover reduces weld spatter accumulation. Easily accomplished proximity cassette installation. Elliptical design for space saving. 6 Simple arm opening angle changes. Lub-retainer on piston is standard.
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s MK & MK2T – rotary clamp cylinder Medium Degree of filtration Function Max. working pressure Min. working pressure Piston speed Operating temperature Cushion Air connection Compressed air, lubricated or unlubricated (dry) 5 µm Double acting 1.0 MPa (10 bar) 0.1 MPa (1.0 bar) 50–200 mm/s –10 to 60 °C (–10 to 70 °C without magnetic piston) Rubber cushions Ø12–25: M5 × 0.
Cyl in de rs, rotary actuators a nd s hock absorbe rs MIW & MIS – escapement Medium Degree of filtration Function Max. working pressure Min. working pressure Operating temperature Air connection Compressed air, lubricated or unlubricated (dry) 5 µm Double acting 0.7 MPa (7.0 bar) 0.2 MPa (2.0 bar) –10 to 60 °C M5 ■ Ideal for e.g.
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s CE1 – stroke reading cylinder Medium Max. working pressure Min. working pressure Humidity Lubrication Operating temperature Cushioning Piston accuracy, non-rotating Installation Compressed air, lubricated or unlubricated (dry) 1.0 MPa (10 bar) Ø12: 0.07 MPa (0.7 bar); Ø20–63: 0.05 MPa (0.5 bar) 25–85% RH (no condensation) No lubrication 0 to 60 °C Ø12–32: no; Ø40–63: yes ±0.
Cyl in de rs, rotary actuators a nd s hock absorbe rs CRB2 – rotary actuator (size 10–30) Medium Degree of filtration Function Rotation angle Allowed rotation time Shaft design Rotation angle tolerance Max. working pressure Min. working pressure Operating temperature Cushion Air connection Compressed air, lubricated or unlubricated (dry) 5 µm Double acting 90°, 180°, 270° or adjustable Size 10–20: 0.03–0.30 s/90°; Size 30: 0.04–0.30 s/90° Double shaft (with single flat on both shafts) 0 to +4° Ø10–20: 0.
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s CRB1 – rotary actuator (size 50–100) Medium Degree of filtration Function Rotation angle Allowed rotation time Shaft design Max. working pressure Min. working pressure Operating temperature Air connection Compressed air, lubricated or unlubricated (dry) 5 µm Double acting 270° 0.1–1.0 s/90° One side with single flat, other side with square 1.0 MPa (10 bar) 0.15 MPa (1.
Cyl in de rs, rotary actuators a nd s hock absorbe rs ECDRA1 – rotary actuator Medium Degree of filtration Function Rotation angle Allowed rotation time Shaft design Backlash Rotation angle tolerance Max. working pressure Min. working pressure Operating temperature Cushion Air connection Compressed air, lubricated or unlubricated (dry) 5 µm Double acting 90°, 180° Ø30: 0.2–1.0 s/90°; Ø50: 0.2–2.0 s/90°; Ø63: 0.2–3.0 s/90°; Ø80: 0.2–4.0 s/90°; Ø100: 0.2–5 s/90° Double shaft, one side w.
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s CRJ – miniature rotary actuator Medium Degree of filtration Function Rotation angle Max. working pressure Min. working pressure Operating temperature Air connection Compressed air, lubricated or unlubricated (dry) 5 µm Double acting Standard: 90°, 100°, 180°, 190°; with external stops: 90°, 180° 0.7 MPa (7.0 bar) 0.15 MPa (1.
Cyl in de rs, rotary actuators a nd s hock absorbe rs CRQ2 – compact rotary actuator Medium Degree of filtration Function Rotation angle Allowed rotation time Shaft design Max. working pressure Operating temperature Cushion Air connection Compressed air, lubricated or unlubricated (dry) 5 µm Double acting 90°, 180°, 360°, adjustable ±5° in each end position Ø10–15: 0.2–0.7 s/90°; Ø20–40: 0.2–1 s/90° Double shaft, one side with single flat, other side with square Ø10–15: 0.7 MPa (7.0 bar); Ø20–40: 1.
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s MSQ – rotary table Medium Degree of filtration Function Rotation angle Allowed rotation time Max. working pressure Min. working pressure Operating temperature Cushion Air connection Compressed air, lubricated or unlubricated (dry) 5 µm Double acting 0–190° Adjustment bolt – 10–50: 0.2–1.0 s/90°; 70: 0.2–1.5 s/90°; 100: 0.2–2.0 s/90°; 200: 0.2–2.5 s/90° With shock absorber – 10–50: 0.2–0.7 s/90°; 70–200: 0.2–1.0 s/90° Size 1–7: 0.
Cyl in de rs, rotary actuators a nd s hock absorbe rs MSQ-H – rotary table with external shock absorbers Medium Degree of filtration Function Rotation angle Allowed rotation time Max. working pressure Min. working pressure Operating temperature Cushion Compressed air, lubricated or unlubricated (dry) 5 µm Double acting 0–190° 0.2–1.0 s/90° 1.0 MPa (10 bar) 0.1 MPa (1.0 bar) 0 to 60 °C Shock absorber Axial – 10–20: M5 × 0.8; 30–50: Rc1/8; Air connection Side – M5 × 0.
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s MSZ – 3-position rotary table Medium Degree of filtration Rotation angle Max. working pressure Min. working pressure Compressed air, lubricated or unlubricated (dry) 5 µm 0–190° with three positions 0.7 MPa (7 bar) 0.
Cyl in de rs, rotary actuators a nd s hock absorbe rs MSU – rotary table Medium Degree of filtration Function Rotation angle Allowed rotation time Max. working pressure Min. working pressure Operating temperature Air connection Radial/axial deviation of rotary table Air, lubricated or unlubricated (dry) 5 µm Double acting 90° (±10°) and 180° (±10°) Note! 90° (±5°) for MSUB with double vanes 0.07–0.3 s/90° Ø1–7: 0.7 MPa (7 bar); Ø20: 1 MPa (10 bar) Size 1: 0.2 MPa (2 bar); size 3, 7, 20: 0.15 MPa (1.
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s RB – shock absorber Type Thread Stroke Max. impact velocity Min. impact velocity Max. no of cycles/min Max. spring force Min. spring force Operating temperature RB0806 RB1007 M8 × 1 M10 × 1 6 mm 7 mm 5 m/s 5 m/s 0.1 m/s 0.1 m/s 80 70 7.5 N 9.6 N 3.5 N 6.5 N –10 to 80 °C RB1412 M14 × 1.5 12 mm 5 m/s 0.1 m/s 45 16.3 N 7.0 N Shock absorber RB – without cap Part number RB0806 RB1007 RB1412 RB2015 RB2725 Thread M8 × 1.0 M10 × 1.0 M14 × 1.
Cyl in de rs, rotary actuators a nd s hock absorbe rs RJ – shock absorber Type Max. energy Thread Stroke Max. impact velocity Min. impact velocity Max. no of cycles/min Max. spring force Min. spring force Max. allowed force Operating temperature Weight RJ0806 H L 1J M8 × 1 6 mm 2 m/s 1 m/s 0.05 m/s 80 5.4 N 2.8 N 245 N –10 to 60 °C 15 g RJ1007 H L 3J M10 × 1 7 mm 2 m/s 1 m/s 0.05 m/s 70 8.4 N 5.4 N 422 N RJ1412 H L 10 J M14 × 1.5 12 mm 2 m/s 1 m/s 0.05 m/s 45 17.4 N 6.4 N 814 N 423 g 65 g Max.
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s Cylinder variations according to customer specifications These cylinder variants are general custom designs that can be applied to a variety of cylinder types. Contact SMC for detailed information on specific cylinders and detailed performance.
Cyl in de rs, rotary actuators a nd s hock absorbe rs Modification of the piston rod end Part number: modification of the piston rod end - X A1 Part number Piston rod modification See below When only thread length and total protrusion from cylinder end is changed, enter these dimensions. A0 A1 A2 A3 C C0.
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s Sensor mounting ■ SMC’s primary sensor D-M9, can now be applied to virtually all cylinders and grippers ■ In cases without round mounting grooves, the fasteners below can be used Sensor D-M9 Bracket BQ2-012 Sensor D-M9 Bracket BJ3 and bracket BMB5/BA7 Sensor D-M9 Bracket BMG2-012 Band BM2/BJ2 Sensor D-M9 Mounting in rectangular groove Mounting on rail Mounting on tie rod Band mounting CE1 CG1 CG5-S CLQ CP96 CQ2 CQM CQS CRA1 ✔ ✔
Cyl in de rs, rotary actuators a nd s hock absorbe rs Sensors SMC’s sensors for detection of cylinder piston are available in several variants. Installation and dimensions are determined by the cylinder to which the sensor is suitable. ■ Reed sensors are mechanical ■ Electronic sensors are completely without moving parts, more vibration resistant and have a longer life Contact SMC for other variants than those shown below.
C y l i n de r s , r ota ry act u ato r s a n d s h ock absor be r s D-M9-W – sensor with 2-colour indication ■ Signal strength is shown in two colors on the sensor: green = strong signal, red = weak signal ■ Installation simplified ■ Easy to see that the sensor is correctly positioned ■ Avoid problems caused by unsecure signals Sensor Part number D-M9PWL D-M9PWMAPC D-M9PWSAPC D-M9PWVL D-M9PWVSAPC D-M9NWL D-M9NWSAPC D-M9NWVL D-M9NWVSAPC Description Electronic PNP, with 3 m cable Electronic PNP, with 1 m
Cyl in de rs, rotary actuators a nd s hock absorbe rs PRSB – splitbox for sensors No of sensor/actuator channels Type of connector power supply Indication signal Cable length (trunk cable) Enclosure 5/10 m 8 M8 female connector Yellow LED Green LED 5 m/10 m IP67 135 106 13 [mm] 5 18 26 4 Mounting holes Ø4.7 (2 pcs.) LED for power supply (1 pcs.) LED for signal (8 pcs.
7 Electric actuators 317
E l ect r ic actuators Contents LEHZ – electric parallel gripper, 2-finger 321 LEHF – electric parallel gripper, 2-finger 321 LEHS – electric chuck gripper, 3-finger 322 LES – compact electric slide table 323 LEY – compact electric actuator 324 LEYG – compact electric actuator with guide 325 LER – electric rotary table 326 LEFS – electric linear actuator, with ball screw 327 LEFB – electric linear actuator, belt-driven 328 Accessories for LE series 329 PC software and programming cable kit
El ect r ic act u ato r s LE series A new generation of easy to use electric actuators. LEHZ – electric parallel gripper. LEHF – electric parallel gripper. LEHS – electric chuck gripper. LES – compact electric slide table. LEY – compact electric actuator. LEYG – compact electric actuator with guide. 7 LEF – electric linear actuator. Subject to change LER – electric rotary table.
E l ect r ic actuators System configuration I/O cable for PLC PLC (Not sold by SMC) LEHZ LEHS 24 VDC power supply (See chapter 11) LEHF Accessories (Sold separately) PC software (With USB communication cable for PC) Part number: LEC-W1 LES Motor drive LEC LEY LEF Cable for electric device Handheld terminal (With 3 m cable) Part number: LEC-T1-3EGS Subject to change 7 PC 320
El ect r ic act u ato r s LEHZ – electric parallel gripper, 2-finger Model Stroke Max. Standard gripping force Compact Max. opening-/ closing speed Max. gripping speed Positioning accuracy Operating temperature Motor Encoder Motor drive Rated voltage LEHZ10 4 mm 14 N 6N LEHZ16 6 mm 8N 80 mm/s LEHZ20 10 mm 40 N 28 N LEHZ25 14 mm 100 mm/s LEHZ32 22 mm 130 N — LEHZ40 30 mm 210 N 120 mm/s 50 mm/s 50 mm/s ±0.
E l ect r ic actuators LEHS – electric chuck gripper, 3-finger Model Stroke/bore Max. Standard gripping force Compact Max. opening-/ closing speed Max. gripping speed Positioning accuracy Operating temperature Motor Encoder Motor drive Rated voltage LEHS10 4 mm 5.5 N 3.5 N LEHS20 6 mm 22 N 17 N LEHS32 8 mm 90 N — LEHS40 12 mm 130 N 70 mm/s 80 mm/s 100 mm/s 120 mm/s 50 mm/s ±0.02 mm 5 to 40 °C (free of humidity) Stepper motor (servo 24 VDC) Incremental A/B-phase (800 pulses/rev.
El ect r ic act u ato r s LES – compact electric slide table Model Stroke Pitch horizontal Max. load vertical Max. pushing force Max. speed Max. pushing speed Positioning accuracy Operating temperature Motor Encoder Motor drive Supply voltage LESH8R LESH16R 50, 75 mm 50, 100 mm 4 mm 8 mm 5 mm 10 mm 2 kg 1 kg 6 kg 4 kg 0.5 kg 0.25 kg 2 kg 1 kg 15 N 10 N 55 N 35 N 200 mm/s 400 mm/s 200 mm/s 400 mm/s 20 mm/s ±0.
E l ect r ic actuators LEY – compact electric actuator Model Stroke Pitch hori- 3000 mm/s2 zontal 2000 mm/s2 vertical 2000 mm/s2 Max. pushing force Max. speed Max. pushing speed Positioning accuracy Operating temperature Motor Encoder Motor drive Supply voltage Max. load LEY16 LEY25 30, 50, 100, 150, 200, 250, 30, 50, 100, 150, 200, 250, 300, 300 mm 350, 400 mm 10 mm 5 mm 2.
El ect r ic act u ato r s LEYG – compact electric actuator with guide Model Stroke Pitch hori- 3000 mm/s2 Max. zontal 2000 mm/s2 load vertical 2000 mm/s2 Max. pushing force Max. speed Max. pushing speed Positioning accuracy Operating temperature Motor Encoder Motor drive Supply voltage LEYG16 LEYG25 30, 50, 100, 200 mm 30, 50, 100, 200, 300 mm 10 mm 5 mm 2.5 mm 12 mm 6 mm 3 mm 4 kg 11 kg 20 kg 12 kg 30 kg 6 kg 17 kg 30 kg 18 kg 50 kg 1.5 kg 3.5 kg 7.
E l ect r ic actuators LER – electric rotary table Model Rotation angle Max. torque Max. torque at pushing motion Max. inertia Rotating speed Pushing speed Standard Weight High precision Acceleration/deceleration Backlash Rotation angle tolerance Operating temperature Motor Encoder Motor drive Supply voltage LER10K 310° 0.3 Nm 0.15 Nm LER10J 0.2 Nm LER30K 320° 1.2 Nm 0.8 Nm 10 Nm 6.6 Nm 0.1 Nm 0.6 Nm 0.4 Nm 5 Nm 3.3 Nm 0.012 kgm2 30–420°/s 30°/s 0.1 kgm2 20–280°/s 20°/s 2.2 kg 2.4 kg 0.
El ect r ic act u ato r s LEFS – electric linear actuator, with ball screw Model LEFS16 Stroke 100, 200, 300, 400 mm Pitch horizontal vertical Max. speed Positioning accuracy Operating temperature Motor Encoder Motor drive Supply voltage Max. load LEFS25 100, 200, 300, 400, 500, 600 mm 12 mm 6 mm 20 kg 7.5 kg 15 kg 500 mm/s 250 mm/s 10 mm 5 mm 9 kg 10 kg 2 kg 4 kg 500 mm/s 250 mm/s ±0.02 mm 5 to 40 °C (free of humidity) Stepper motor (servo 24 VDC) Incremental A/B-phase (800 pulses/rev.
E l ect r ic actuators LEFB – electric linear actuator, belt-driven Model Stroke Max. load horizontal Max. speed Positioning accuracy Corresponding pitch Operating temperature Motor Encoder Motor drive Supply voltage LEFB16 LEFB25 LEFB32 300, 500, 600, 700, 800, 900, 300, 500, 600, 700, 800, 900, 1000, 1200, 1500, 1800, 2000 mm 1000 mm 1 kg 5 kg 14 kg 1100 mm/s (2000 mm/s with 1400 mm/s (2000 mm/s with 1500 mm/s servo motor) servo motor) ±0.
El ect r ic act u ato r s Accessories for LE series PC software and programming cable kit PC software and programming cable kit Software Part number LEC-W1 Contents Software for setting the position, speed, etc. Data cable (CD-ROM) Data cable Converter, RS485-USB USB cable USB cable Converter PC ■ Possible to set all 64 positions with different speed, acceleration, etc.
E l ect r ic actuators Spare parts for LE series LECP6 – motor drive for stepper motor (servo 24 VDC) Power supply Inputs Outputs Number of positions Serial communication Memory LED indicator Cable length Heat dissipation Operating temperature 24 VDC ±10% 11 13 64 absolute or incremental RS485 (Modbus-protocol) EEPROM LED (green/red) one of each I/O-cable: ≤5 m; cable for electric device: ≤20 m Natural air cooling 0 to 40 °C (free of humidity) Enclosed when ordering an electric unit from the LE series.
El ect r ic act u ato r s Spare parts for LE series Cables Cable between drive unit and electric device – for stepper motor Part number LE-CP-1 LE-CP-3 LE-CP-5 LE-CP-8 LE-CP-A LE-CP-B LE-CP-C 1. Cable length 1.5 m 3m 5m 8 m1 10 m 15 m1 20 m Manufactured to order. Cable between drive unit and electric device equipped with lock – for stepper motor Part number LE-CP-1-B LE-CP-3-B LE-CP-5-B LE-CP-8-B LE-CP-A-B LE-CP-B-B LE-CP-C-B 1. Cable length 1.
E l ect r ic actuators Other product series SMC provides electrical linear actuators in many different designs: AC servo motor or stepper motor, ball screw or toothed belt, long stroke, or compact, for horizontal or vertical use. LXF – compact electric slide unit. Stepper motor. LTF – electric linear actuator. AC servo motor. LXP – compact electric linear actuator. Stepper motor or AC servo motor. 7 LG 240Z – electric linear actuator. Modular system, X-, Y- and Z-axes. LXS – compact electric slide unit.
El ect r ic act u ato r s LXF – compact electric slide unit (stepper motor) Model Stroke Motor Screw Max. load (horizontal direction) Max. speed Max. pushing force Positioning accuracy Type of guide Operating temperature Allowed static moment LXFH5SA LXFH5SB 25, 50, 75, 100 mm 5-phase stepper motor Ø8, pitch 6 mm Ø8, pitch 12 mm 3 kg 2 kg 100 mm/s 200 mm/s 15 N ±0.
E l ect r ic actuators LXP – compact electric linear actuator (stepper motor) Model Stroke Motor LXPB2SA LXPB2SB LXPB5SA LXPB5SB 50, 75, 100, 125, 150, 175, 200 mm 2-phase stepper motor 5-phase stepper motor Ø8, Ø8, Ø8, Ø8, pitch 6 mm pitch 12 mm pitch 6 mm pitch 12 mm Screw Max. load (horizontal direction) Max. payload (vertical direction) Max. speed Max.
El ect r ic act u ato r s LXP – compact electric linear actuator (AC servo motor) Model Stroke Motor Encoder Screw Screw pitch Max. speed Max. load (horizontal) Max. load (vertical) Positioning accuracy Type of guide Operating temperature LXPBABC LXPBABD 50, 75, 100, 125, 150, 175, 200 mm Mitsubishi AC servo 50 W (other brands upon request) Absolute encoder on motor Ball screw Ø8 mm 2 mm 5 mm 50 mm/s 100 mm/s 6 kg 5 kg ±0.
E l ect r ic actuators LXS – compact electric slide unit (stepper motor) ■ With precision cross-roller guide ■ For horizontal or vertical mounting Applicable drive units Part number LXSH2SA-50S-Q LXSH2SA-75S-Q LXSH2SA-100S-Q LXSH2SA-125S-Q LXSH2SA-150S-Q LXSH2SB-50S-Q LXSH2SB-75S-Q LXSH2SB-100S-Q LXSH2SB-125S-Q LXSH2SB-150S-Q LXSH5SA-50S-Q LXSH5SA-75S-Q LXSH5SA-100S-Q LXSH5SA-125S-Q LXSH5SA-150S-Q LXSH5SB-50S-Q LXSH5SB-75S-Q LXSH5SB-100S-Q LXSH5SB-125S-Q LXSH5SB-150S-Q 7 Stroke 50 mm 75 mm 100 mm 125
El ect r ic act u ato r s LXS – compact electric slide unit (AC servo motor) Model Stroke Motor Encoder Screw Screw pitch Max. speed Max. load (horizontal) Max. load (vertical) Positioning accuracy Type of guide Operating temperature LXSHABC LXSHABD 50, 75, 100, 125, 150 mm Mitsubishi AC servo 50 W (other brands upon request) Absolute encoder on motor Ball screw Ø8 mm 2 mm 5 mm 50 mm/s 100 mm/s 10 kg (4 kg) 5 kg (4 kg) ±0.
E l ect r ic actuators LC6 – drive unit for LX unit with stepper motor Model Power supply Step angle1 Motor current Input signal Max. input frequency Function 2 Connection method Ambient temperature Ambient humidity Corresponding cylinder LC6D-220AD LC6D-507AD 24 VDC ±10%, 3 A 24 VDC ±10%, 2.5 A Whole step (1.8); Whole step (0.72); half step (0.9) half step (0.36) 2.0/phase 0.
El ect r ic act u ato r s LJ1 & LG1 – electric linear actuator (AC servo motor), low profile (LG1) Series Model Stroke Motor Encoder Screw pitches Max. load (horizontal direction) Max. load (vertical direction) Max.
E l ect r ic actuators LTF – electric slide unit (AC servo motor) Model Stroke Motor Encoder Screw pitch Max. load (horizontal) Max. load (vertical) Max. speed Postioning accuracy Type of mechanical guide Operating temperature See model overview below 100–600 or 100–1000 mm, depending on model Mitsubishi AC servo (other brands upon request) Absolute encoder on motor 6.
El ect r ic act u ato r s LG-240Z – electric linear actuator (AC servo motor) ■ Modular system with mounting brackets ■ Three versions: X-, Y- and Z-axes for 5–100 kg load ■ Horizontal and vertical mounting with brake ■ Stroke lengths: 100–1500 mm ■ Max. speed: 2000 mm/s depending on model, stroke and load ■ Positioning accuracy: ±0.
E l ect r ic actuators LG-240Z – electric linear actuator (AC servo motor) Part number: XYZ-combination LG-240Z- X A0 L E Y 50 G J ZB 20 D C ➊ X-axis ➋ ➌ ➍ ➎ ➌ ➏ Y-axis Rolled ball screw Ø20, pitch 40 mm ➊ ➋ Stroke 10 90 A0 B0 C0 D0 E0 F0 100 mm 900 mm 1000 mm 1100 mm 1200 mm 1300 mm 1400 mm 1500 mm Standard strokes available in 100 mm intervals.
El ect r ic act u ato r s LG-240Z – electric linear actuator (AC servo motor) Part number: single Y-/Z-axis Y-/Z-axis LG-240Z- Y 50 G J ➊ ➊ Axis type Y In-line mounted motor ZB In-line mounted motor ZC Side mounted motor ➋ Stroke 10 100 mm 15 150 mm 95 950 mm A0 1000 mm ➌ ➌ ➍ ➍ Motor specifications Motor specifications A B C D G H J K ➋ Mitsubishi, Yaskawa, OMRON Matsushita Mitsubishi, Yaskawa, OMRON Matsushita Brake 200 W without brake 200 W with brake 200 W without brake 200 W with bra
E l ect r ic actuators E-MY2B – electric linear actuator Model Guide type Cylinder bore Max. load Speed (adjustable) Acceleration (adjustable) Repeatability Operating temperature LED indication Supply voltage Motor Power supply Output 1. E-MY2B Unguided 16 mm 25 mm 8 kg (10 kg)1 4 kg (5 kg)1 100–1000 mm/s (10 mm/s on request) 0.49–4.9 m/s2 End positions ±0.01 mm; intermediate positions ±0.1 mm 5 to 40 °C Supply voltage, alarm, positioning 24 VDC ±10% Stepper motor with incremental encoder 2.
El ect r ic act u ato r s E-MY2C & -H – electric linear actuator Model Guide type Cylinder bore Max. load Speed (adjustable) Acceleration (adjustable) Repeatability Operating temperature LED indication Supply voltage Motor Power supply Output E-MY2C E-MY2H Roller bearing Rail guide 16 and 25 mm Ø16: 5 kg; Ø25: 10 kg 100–1000 mm/s 0.49–4.9 m/s2 End positions ±0.01 mm; intermediate positions ±0.1 mm 5 to 40 °C Supply voltage, alarm, positioning 24 VDC Stepper motor with incremental encoder 2.
E l ect r ic actuators LZ – electric actuator ■ ■ ■ ■ ■ ■ Available in actuator size Ø16 or Ø25 Can be used in the same way as a pneumatic actuator Only 3 input signals are needed Stroke lengths up to 200 mm Loads up to 19.
El ect r ic act u ato r s LZ – electric actuator C 14 mm 22 mm 14 mm 22 mm Dimensions for female thread. For male thread, add 10.5 mm for LDZ3 and 14 mm for LDZ5. B B 38 mm 54.5 mm 38 mm 54.5 mm A + stroke B A 216.5 mm 285.5 mm 203 mm 268 mm C Model LDZB3 LDZB5 LDZC3 LDZC5 C Dimensions A + stroke Model overview LZB – electric actuator Model Max. force LDZB3L 80 N LDZB3M 43 N LDZB3H 24 N LDZB5L 196 N LDZB5M 117 N LDZB5H 72 N Max.
E l ect r ic actuators LZ – electric actuator Part number: electric actuator LZB LZB B 3 L - 100 A 3 With position sensing LDZB B 3 L - 100 A 3 ➊ ➋ ➌ With magnetic piston ➊ B L F U ➌ Mounting ➍ ➋ 3 5 ➏ Pitch L Pitch 2 mm M Pitch 6 mm H Pitch 12 mm Standard With foot bracket With flange With trunnion Actuator size 3 5 ➎ - M9B ➎ ➏ ➐ ➑ ➑ Motor size ➒ Position sensing Without sensors For actuator size 3 For actuator size 5 ➒ Number of sensors Standard stroke (mm) 25, 40, 50, 100, 200 Cor
8 Grippers and vacuum 349
G r ippe rs an d vac uum Contents Parallel grippers MHW2 – angle gripper, 2-finger, 180° MHZ2 – parallel gripper, 2-finger (narrow finger position) 354 MHZ2 – parallel gripper, 2-finger (wide finger position) 355 MRHQ – turn and gripper combination MHZL2 – parallel gripper, 2-finger, long stroke 356 Tool changers MHZJ2 – parallel gripper, 2-finger, with protective bellows 357 MHF2 – parallel gripper, 2-finger 358 MHL2 – wide opening gripper, 2-finger 359 MDHR2 & -3 – precision gripper, 2- a
Safety Always read before handling These safety instructions are intended to prevent hazardous situations and/or equipment damage. These instructions indicate the level of potential hazard by labeling • Caution!, • W ARNING! or • Danger!. To ensure safety, be sure to observe ISO 44141, JIS B 83702 and other safety practices (EN ISO 13849-13). • Caution! Operator error could result in injury or equipment damage. • W ARNING! Operator error could result in serious injury or loss of life.
Safety, grippers Construction Selecting grippers • Caution! • Danger! 1. The current object’s center of gravity must lie within the current gripper workspace. If the holding point’s position is offset (eccentric gripping) in relation to the finger center line (x and y direction), the force cause a backlash in the mechanism of the gripper, thereby causing shortened life time. See the appropriate measure In the charts for each gripper. H 1.
Safety, grippers Clearance 5. Choose a gripper with the required stroke length. Too short stroke can cause false signals from a position sensor when the sensor switching differential (hysteresis) falls outside the gripper workspace. 6. If a gripper is to pick up an item from something internal, ensure that there is enough space for the gripper to use its’ full stroke. 3. Choose a gripper that has a sufficiently high holding force to offset the object’s own weight.
G r ippe rs an d vac uum MHZ2 – parallel gripper, 2-finger (narrow finger position) Medium Degree of filtration Function Max. working pressure Min. working pressure Max. frequency Operating temperature Air connection Guide type Compressed air, lubricated or unlubricated (dry) 5 µm Single acting/double acting 0.7 MPa (7.0 bar) Single acting – Ø10: 0.35 MPa (3.5 bar); Ø16–25: 0.25 MPa (2.5 bar) Double acting – Ø10: 0.2 MPa (2.0 bar); Ø16–25: 0.1 MPa (1.0 bar) 180 strokes/minute –10 to 60 °C Ø10: M3 × 0.
Gr ipper s a n d vac u u m MHZ2 – parallel gripper, 2-finger (wide finger position) Medium Degree of filtration Gripper type Function Max. working pressure Min. working pressure Max. frequency Operating temperature Air connection Guide type Compressed air, lubricated or unlubricated (dry) 5 µm 2-finger parallel gripper Single acting/double acting 0.7 MPa (7.0 bar) Single acting – Ø6: 0.3 MPa (3.0 bar); Ø10: 0.35 MPa (3.5 bar); Ø16–40: 0.25 MPa (2.5 bar) Double acting – Ø6: 0.15 MPa (1.5 bar); Ø10: 0.
G r ippe rs an d vac uum MHZL2 – parallel gripper, 2-finger, long stroke Medium Degree of filtration Gripper type Function Max. working pressure Min. working pressure Max. frequency Operating temperature Air connection Guide type Compressed air, lubricated or unlubricated (dry) 5 µm 2-finger parallel gripper Single acting/double acting 0.7 MPa (7.0 bar) Single acting – Ø10: 0.35 MPa (3.5 bar); Ø16–25: 0.25 MPa (2.5 bar) Double acting – Ø10: 0.2 MPa (2.0 bar); Ø16–25: 0.1 MPa (1.
Gr ipper s a n d vac u u m MHZJ2 – parallel gripper, 2-finger, with protective bellows Medium Degree of filtration Gripper type Function Max. working pressure Min. working pressure Max. frequency Operating temperature Air connection Guide type Compressed air, lubricated or unlubricated (dry) 5 µm 2-finger parallel gripper Single acting/double acting 0.7 MPa (7.0 bar) Single acting – Ø6: 0.3 MPa (3.0 bar); Ø10: 0.35 MPa (3.5 bar); Ø16–25: 0.25 MPa (2.5 bar) Double acting – Ø6: 0.15 MPa (1.5 bar); Ø10: 0.
G r ippe rs an d vac uum MHF2 – parallel gripper, 2-finger Medium Degree of filtration Function Max. working pressure Min. working pressure Max. frequency Operating temperature Air connection Guide type Air, lubricated or unlubricated (dry) 5 µm Double acting 0.7 MPa (7 bar) Ø8: 0.15 MPa (1.5 bar); Ø12–20: 0.1 MPa (1 bar) Short and medium stroke (D, D1): 120 strokes/minute; long stroke (D2): 60 strokes/minute –10 to 60 °C Ø8: M3 × 0.5; Ø12–20: M5 × 0.
Gr ipper s a n d vac u u m MHL2 – wide opening gripper, 2-finger Medium Degree of filtration Gripper type Function Max. working pressure Min. working pressure Max. frequency Operating temperature Air connection Compressed air, lubricated or unlubricated (dry) 5 µm 2-finger parallel gripper Double acting 0.6 MPa (6.0 bar) 0.1 MPa (1.0 bar) Standard stroke: 60 strokes/minute; extra long stroke: 40 strokes/minute –10 to 60 °C Ø10–25: M5 × 0.
G r ippe rs an d vac uum MDHR2 & -3 – precision gripper, 2- and 3-finger Medium Degree of filtration Gripper type Function Max. working pressure Min. working pressure Max. frequency Operating temperature Air connection Compressed air, lubricated or unlubricated (dry) 5 µm 2- and 3-finger precision gripper Double acting 0.6 MPa (6.0 bar) Ø10: 0.2 MPa (2.0 bar); Ø15–30: 0.15 MPa (1.5 bar) 180 strokes/minute 0 to 60 °C Ø10–15: M3 × 0.5; Ø 20–30: M5 × 0.8 ■ Precision gripper for accurate handling ■ ±0.
Gr ipper s a n d vac u u m MHS2, -3 & -4 – chuck gripper, 2-, 3- and 4-finger Medium Degree of filtration Gripper type Function Max. working pressure Min. working pressure Max. frequency Operating temperature Air connection Compressed air, lubricated or unlubricated (dry) 5 µm 2, 3- or 4-finger chuck gripper Double acting 0.6 MPa (6.0 bar) Ø16–25: 0.2 MPa (2.0 bar); Ø32–125: 0.1 MPa (1.0 bar) Ø16–25: 120 strokes/minute; Ø32–63: 60 strokes/ minute; Ø80–125: 30 strokes/minute –10 to 60 °C Ø16: M3 × 0.
G r ippe rs an d vac uum MHSH3 – chuck gripper with ejector hole/cylinder Medium Degree of filtration Gripper type Function Max. working pressure Min. working pressure Max. frequency Operating temperature Air connection Compressed air, lubricated or unlubricated (dry) 5 µm 3-finger chuck gripper Double acting 0.6 MPa (6.0 bar) Ø16–25: 0.2 MPa (2.0 bar); Ø32–80: 0.1 MPa (1.0 bar) Ø16–25: 120 strokes/minute; Ø32–63: 60 strokes/minute; Ø80: 30 strokes/minute –10 to 60 °C Ø16: M3 × 0.5; Ø20–63: M5 × 0.
Gr ipper s a n d vac u u m MHSJ3 – chuck gripper with protective bellows Medium Degree of filtration Gripper type Function Max. working pressure Min. working pressure Max. frequency Operating temperature Air connection Compressed air, lubricated or unlubricated (dry) 5 µm 3-finger chuck gripper Double acting 0.6 MPa (6.0 bar) Ø16–25: 0.2 MPa (2.0 bar); Ø32–80: 0.1 MPa (1.0 bar) Ø16–25: 120 strokes/minute; Ø32–63: 60 strokes/ minute; Ø80: 30 strokes/minute –10 to 60 °C Ø16: M3 × 0.5; Ø20–63: M5 × 0.
G r ippe rs an d vac uum MHSHJ3 – chuck gripper with ejector hole/cylinder and protective bellows Medium Degree of filtration Gripper type Function Max. working pressure Min. working pressure Max. frequency Operating temperature Air connection Compressed air, lubricated or unlubricated (dry) 5 µm 3-finger chuck gripper Double acting 0.6 MPa (6.0 bar) 0.1 MPa (1.0 bar) Ø32–63: 60 strokes/minute; Ø80: 30 strokes/minute –10 to 60 °C Ø16: M3 × 0.5; Ø20–63: M5 × 0.
Gr ipper s a n d vac u u m MHSL3 – chuck gripper with long stroke Medium Degree of filtration Gripper type Function Max. working pressure Min. working pressure Max. frequency Operating temperature Air connection Compressed air, lubricated or unlubricated (dry) 5 µm 3-finger chuck gripper Double acting 0.6 MPa (6.0 bar) Ø16–25: 0.2 MPa (2.0 bar); Ø32–125: 0.1 MPa (1.0 bar) Ø16–25: 120 strokes/minute; Ø32–63: 60 strokes/ minute; Ø80–125: 30 strokes/minute –10 to 60 °C Ø16: M3 × 0.5; Ø20–63: M5 × 0.
G r ippe rs an d vac uum MHC2 – angle gripper, 2-finger Medium Degree of filtration Gripper type Function Max. working pressure Min. working pressure Max. frequency Operating temperature Air connection Compressed air, lubricated or unlubricated (dry) 5 µm 2-finger angle gripper Single acting/double acting 0.6 MPa (6.0 bar) Single acting: 0.25 MPa (2.5 bar); double acting: 0.1 MPa (1.0 bar) 180 strokes/minute –10 to 60 °C Ø6–10: M3 × 0.5; Ø16–25: M5 × 0.
Gr ipper s a n d vac u u m MHCM – miniature gripper Medium Degree of filtration Gripper type Function Max. working pressure Min. working pressure Max. frequency Operating temperature Gripping force Opening angle ■ Lightweight Compressed air, lubricated or unlubricated (dry) 5 µm 2-finger angle gripper Single acting, normally open 0.6 MPa (6.0 bar) 0.4 MPa (4.0 bar) 180 strokes/minute –10 to 60 °C 0.
G r ippe rs an d vac uum MHY2 – angle gripper, 2-finger, 180° Medium Degree of filtration Gripper type Function Max. working pressure Min. working pressure Max. frequency Operating temperature Air connection Compressed air, lubricated or unlubricated (dry) 5 µm 2-finger angle 180° Double acting 0.6 MPa (6.0 bar) 0.1 MPa (1.0 bar) 60 strokes/minute –10 to 60 °C M5 × 0.
Gr ipper s a n d vac u u m MRHQ – turn and gripper combination Medium Degree of filtration Gripper type Function Rotation angle Allowed rotation time Max. working pressure Min. working pressure Operating temperature Air connection Guide type (gripper) Compressed air, lubricated or unlubricated (dry) 5 µm 2-finger parallel gripper Single acting/double acting 90°, 180° adjustable ±50 in each end position 0.07–0.3 s/90° Gripper: Ø10–16: 0.6 MPa (6.0 bar); Ø20–25: 0.7 MPa (7.
G r ippe rs an d vac uum MA – tool changer Series Coupling Max. load Function Operating pressure Max. pressure Operating temperature Repeatability MA210 Balls 3 kg MA310 MA311 MA320 Cam MA321 Single acting Double acting 5 kg Double acting 0.4 to 0.7 MPa (4.0 to 7.0 bar) 1.05 MPa (10.5 bar) 0 to 60 °C ±0.01 mm Single acting ■ High precision ■ Fits a number of different grippers Contact SMC for more information.
Gr ipper s a n d vac u u m MA330 – compact tool changer Function Operating pressure Max. pressure Operating temperature Repeatability Double acting 0.3 to 0.7 MPa (3 to 7 bar) 1.05 MPa (10.5 bar) 0 to 60 °C ±0.015 mm ■ Very compact – only 50 mm high Contact SMC for more information. XT661 – non-contact gripper Outside diameter Connection Medium Working pressure Max. pressure Optimum supply pressure Operating temperature Lift force at 0.4 MPa 20 mm 40 mm 60 mm M5 × 0.8 Air 0.01–0.5 MPa (0.1–5 bar) 0.
G r ippe rs an d vac uum ZP – vacuum pads Medium Usage Material Compressed air Vacuum handling NBR (standard), see table for other materials NBR Tensile strength Elasticity Gasoline Benzene Solvents (toluene) Solvents (alcohol) Weather resistant Ozone Heat Cold Wear Impact Water Silicone Urethane Fluorine ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● Very good ● Possible in favorable conditions ● Unsuitable As an alternative to NBR, pad
Gr ipper s a n d vac u u m ZP – vacuum pads Adapter For pad diameter Through hole vacuum connection, ZPT Type 1 Type 2 Male Female thread thread 2–8 mm ZPT1-A5 ZPT1-A6 ZPT1-B5 ZPT1-B6 10–16 mm ZPT2-A5 ZPT2-A6 ZPT2-B5 ZPT2-B6 ZPT2-B01 20–32 mm ZPT3-A6 ZPT3-A8 ZPT3-B5 ZPT3-B6 ZPT3-B8 ZPT3-B01 40–50 mm ZPT4-A6 ZPT4-A8 ZPT4-B6 ZPT4-B8 ZPT4-B01 Vacuum connection in the side, ZPR, Type 3 4 mm 6 mm 8 mm push-in push-in push-in fitting fitting fitting ZPRS-04-A5 ZPRS-06-A5 ZPRS-04-A6 ZPRS-06-A6
G r ippe rs an d vac uum ZP – vacuum pads (large sizes) Medium Usage Material Compressed air Vacuum handling NBR (standard), see table for other materials NBR ● ● ● ● ● ● ● ● ● ● ● ● ● Tensile strength Elasticity Gasoline Benzene Solvents (toluene) Solvents (alcohol) Weather resistant Ozone Heat Cold Wear Impact Water Silicone Urethane Fluorine ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● Very good ● Possible in favorable conditions ● Unsuitable As an alternati
Gr ipper s a n d vac u u m ZP – vacuum pads (large sizes) Part number: vacuum pad ZPT – with buffer and vertical connection ZPT 40 H N J 25 - B01 - A18 Pad diameter 40 40 mm 50 50 mm 63 63 mm 80 80 mm 100 100 mm 125 125 mm Mounting thread Profile Vacuum connection H Flat HB Bellows A18 M18 × 1.5, male A22 M22 × 1.
G r ippe rs an d vac uum AMJ – water separator for vacuum Type Medium Connection Max. working pressure Min. working pressure Test pressure Operating temperature Recommended flow Efficiency Life time, element Weight AMJ3000 AMJ4000 AMJ5000 Compressed air G1/4 G1/2 G1 1.0 MPa (10 bar) –0.1 MPa (–1 bar) 1.5 MPa (15 bar) 5 to 60 °C 300 ln/min 500 ln/min 200 ln/min 90% (only condensed water is separated) 2 years or at pressure drop 0.02 MPa (0.2 bar) 0.3 kg 0.6 kg 1.
Gr ipper s a n d vac u u m ZP2V – vacuum saving valve Connection Orifice Working pressure Vacuum Operating temperature Degree of filtration Flow M5 0.3 mm 0.5 mm 0.7 mm 0 to 0.7 MPa (0 to 7 bar) 0 to –100 kPa (0 to –1 bar) 5 to 60 °C 40 µm 3 ln/min 5 ln/min 8 ln/min M8, R1/8, G1/8 0.5 mm 0.
G r ippe rs an d vac uum ZH – vacuum ejector Type Medium Max. vacuum Working pressure Max. pressure Operating temperature Max. suction flow Max. air consumption ZH05 ZH10 ZH13 Compressed air –880 mbar 0.25–0.6 MPa (2.5–6 bar) 0.
Gr ipper s a n d vac u u m ZL – 3-stage vacuum ejector Type Medium Max. suction flow Air consumption Max. vacuum Working pressure Max. pressure Optimum supply pressure Operating temperature ZL112 ZL212 Compressed air 100 ln/min 200 ln/min 126 ln/min 63 ln/min –84 kPa (–0.84 bar) 0.2–0.5 kPa (2–5 bar) 0.7 MPa (7 bar) 0.
G r ippe rs an d vac uum ZX – vacuum unit Medium Max. suction Max. air consumption Max. vacuum Working pressure Max. pressure Optimum supply pressure Operating temperature Connection Supply voltage Compressed air, unlubricated, filtered 5 µm 22 l/min (10 l/min in manifold) 46 l/min (23 l/min in manifold) –84 kPa (–0.84 bar) 0.2–0.55 MPa (2–5.5 bar) 0.7 MPa (7 bar) 0.
Pressure, vacuum and flow switches 9 381
P r ess u re, vac uum and flow switc hes Contents Pressure and vacuum switches PPA – portable pressure gauge 383 PS1000 & -1100 – pressure switch 383 IS10, ISE2 & ZSE2 – pressure and vacuum switch 384 ISE10 & ZSE10 – pressure and vacuum switch 384 ISE30A & ZSE30A – pressure and vacuum switch 385 ISE40A & ZSE40A – pressure and vacuum switch 386 ISE70 & -75 – pressure switch 387 ISE80 & ZSE80 – pressure and vacuum switch 388 PSE500 – pressure sensor 389 PSE200 & -300 – controller 390 Flow
P r ess u r e , vac u u m a n d f l ow switc h es PPA – portable pressure gauge Type Medium Working pressure Test pressure Connection Display accuracy Repeatability Temperature characteristic Operation voltage Operating temperature Weight PPA100 PPA101 PPA102 Compressed air, non-corrosive gases –0.1 to 1 MPa –101 to 10 kPa –10 to 100 kPa 1.5 MPa 200 kPa 200 kPa Ø6, push-in fitting (M5 thread) ±2% F.S. (at 25 °C) ±1% F.S. (at 25 °C) ±3% F.S. (0 to 50 °C, with 25 °C as default) 3 V (2 pcs. 1.
P r ess u re, vac uum and flow switc hes IS10, ISE2 & ZSE2 – pressure and vacuum switch Type Contact type Pressure range Adjustable pressure range Max. pressure Load voltage Load Power consumption Connection Electrical connection Enclosure IS10 NO reed 0.1 to 0.6 MPa (1 to 6 bar) 0.1 to 0.6 MPa (1 to 6 bar) 0.7 MPa — 50 mA — 1/8 male Molded cable, 3 m — ISE2 ZSE2 PNP 0.1 to 1 MPa 0 to –101 kPa (1 to 10 bar) (–1 to 0 bar) 0.
P r ess u r e , vac u u m a n d f l ow switc h es ISE30A & ZSE30A – pressure and vacuum switch Type Contact type Pressure range Adjustable pressure range Max. pressure Load voltage Load Power consumption Connection Electrical connection Enclosure ISE30A ZSE30A PNP or PNP/analog 0 to 1 MPa 0 to –101 kPa (0 to 10 bar) (0 to –1.01 bar) –0.1 to 1 MPa 10 to –105 kPa (–1 to 10 bar) (0.1 to 1.05 bar) 1.5 MPa 500 kPa 12–24 VDC (±10% max.
P r ess u re, vac uum and flow switc hes ISE40A & ZSE40A – pressure and vacuum switch Type Pressure range Adjustable pressure range Max. pressure Load voltage Load Power consumption Electrical connection Enclosure ISE40A ZSE40A –0.1 to 1 MPa 0 to –100 kPa (–1 to 10 bar) (0 to –1 bar) –0.105 to 1.05 MPa 10 to 105 kPa (–1.05 to 10.5 bar) (0.1 to 1.05 bar) 1.5 MPa 500 kPa 12–24 VDC (±10% max.
P r ess u r e , vac u u m a n d f l ow switc h es ISE70 & -75 – pressure switch Type Medium Contact type Pressure range Adjustable pressure range Max. pressure Load voltage Load Power consumption Connection Electrical connection Enclosure ISE70 ISE75 ISE75H Air Media not corrosive to stainless steel PNP 0 to 1 MPa 0 to 10 MPa 0 to 15 MPa (0 to 10 bar) (0 to 100 bar) (0 to 150 bar) –0.1 to 1 MPa 0.4 to 10 MPa 0.5 to 15 MPa (–1 to 10 bar) (4 to 100 bar) (5 to 150 bar) 1.
P r ess u re, vac uum and flow switc hes ISE80 & ZSE80 – pressure and vacuum switch Type Medium Contact type Pressure range Max. pressure Load voltage Load Power consumption Connection Electrical connection Enclosure ISE80 ISE80H ZSE80 Media not corrosive to stainless steel PNP or PNP + analog –0.1 to 1 MPa –0.1 to 2 MPa –100 to 0 kPa (–1 to 10 bar) (–1 to 20 bar) (–1 to 0 bar) 2 MPa 4 MPa 500 kPa 12–24 VDC (±10% max.
P r ess u r e , vac u u m a n d f l ow switc h es PSE500 – pressure sensor Pressure range Medium Power supply Operating temperature 1. See below Air. Non-corrosive gases (PSE560, 561 fluids and gases non-corrosive to SUS316L) 12–24 VDC (±10% max.) 0 to 50 °C (PSE560 & -561: –10 to 70 °C)1 PSE 560 Suitable for applications in movement or other reasons that require separate display and sensors. ■ Suitable when the sensor and the display must be separated Vacuum sensor – max.
P r ess u re, vac uum and flow switc hes PSE200 & -300 – controller Type Output PSE300 PSE200 PNP, 1–5 V, 4–20 mA PNP, 80 mA max. 1 channel, 2 outputs 4 channels, 5 outputs + 1 analog 2–24 VDC (±10% max.) 50 mA max. 250 mA max. kPa, mmHg, kgf/cm2, bar, InHg kPa, MPa, kgf/cm2, bar Hysteresis state: adjustable ±0.1% F.S. ±0.1% F.S.
P r ess u r e , vac u u m a n d f l ow switc h es PFM – flow switch for air, nitrogen, argon and carbon dioxide Medium Degree of filtration Working pressure PFM700 Air, nitrogen, argon and carbon dioxide Corresponding 0.01 µm (dry air) –70 to 750 kPa (–0.7 to 7.5 bar) PFM500 ■ Compact flow meter for gases ■ Several mounting possibilities PFMV PFM300 Flow switch – with display, through connection, 6 mm1 Flow sensor – without display, through connection, 6 mm1 Flow 0.2–10 l/min Flow 0.
P r ess u re, vac uum and flow switc hes PFM – flow switch for air nitrogen, argon and carbon dioxide h oug Thrction ne con Accessories Part number Body ZS-33-D ZS-28-A ZS-33-P1L ZS-33-P2L ZS-33-10N ZS-33-25N ZS-33-50N ZS-33-11N ZS-33-10NL ZS-33-25NL ZS-33-50NL ZS-33-11NL ZS-33-C4 ZS-33-C6 ZS-33-C8 ZS-33-F01 ZS-33-F02 ZS-33-F ZS-27-D No Description 1 — Cable, 2 meter, to PFM 2 Cable, 2 meter, to PFMV 3 Adapter, connection down, inside 4 Adapter, connection down, outside Flow controller, through, 10 l/min
P r ess u r e , vac u u m a n d f l ow switc h es PF2A – flow switch Type Medium Working pressure Test pressure Operating temperature Output/output Minimum adjustable unit Linearity Repeatability Supply voltage Connection PF2A10/-50 Dry air, N2 –50 kPa to 0.5 MPa (–0.5 to 5 bar) 1 MPa (10 bar) 0 to 50 °C PNP 1 PF2A11/-21 PFA251 PF2A703H PF2A706H PF2A712H –50 kPa to 0.75 MPa (–0.5 to 7.5 bar) 0.1 to 1.5 MPa (1 to 15 bar) 2.25 MPa (22.
P r ess u re, vac uum and flow switc hes PF3W – flow switch for water Flow switch/sensor PF3W04 PF3W20 PF3W40 PF3W11 Water, glycol, CPVC, clean water 0–1 MPa (0–10 bar) 1.5 MPa (15 bar) 0 to 90 °C 0.01 l/min 0.1 l/min 1 l/min Max. ±3% F.S. ±2% F.S. 12–24 VDC (±10%) 3/8 3/8, 1/2 1/2, 3/4 3/4, 1, CPVC Flow switch/sensor with flow controller ■ Also available with temperature sensor Flow switch/sensor – with built-in display 9 Part number PF3W704-F03-BN-M Conn. 3/8 Flow 0.
P r ess u r e , vac u u m a n d f l ow switc h es PF3W – flow switch for water Sensor without display Flow sensor – without display Part number PF3W504-F03-1N PF3W504-F03-2N PF3W520-F04-1N PF3W520-F04-2N PF3W540-F06-1N PF3W540-F06-2N PF3W511-F10-1N PF3W511-F10-2N PF3W511-U25-1N PF3W511-U25-2N Conn. 3/8 3/8 1/2 1/2 3/4 3/4 1 1 CPVC 25 CPVC 25 Flow sensor – with regulating valve, without display Flow 0.5–4 l/min 0.
Fittings and tubing 10 397
Fitti n gs an d tubing Contents KJ – miniature fittings 399 TH – fluoropolymer tubing 430 KQ2 – standard fittings 401 TD – fluoropolymer tubing 430 KDM – multi-connector 409 TU, TUH, T & TS – tubing 431 DMK – multi-connector 409 TUZ – friction resistant polyurethane tubing 433 KM – manifold 410 TCU – spiral tubing 434 M – miniature fittings 411 TFU – double/triple tubing 434 Pipe fittings 413 KS & KX – rotation fittings 418 TRBU – flame resistant polyurethane tubing with double
F itti n gs a n d t u bin g KJ – miniature fittings Medium Working pressure Test pressure Operating temperature M3/M5 Connection tube outer options diameter 3.
Fitti n gs an d tubing KJ – miniature fittings Union Tee KJT Union “Y” KJU Tube outer diameter a b 2 mm 2 mm 3.2 mm 3.2 mm 3.2 mm 4 mm 4 mm 4 mm 4 mm 6 mm 6 mm 6 mm Part number KJT02-00 KJT23-00 KJT23-04 KJT04-00 KJT04-06 KJT06-00 Union elbow KJL Tube outer diameter a b 2 mm 2 mm 2 mm 4 mm 3.2 mm 4 mm 4 mm 4 mm 4 mm 6 mm 6 mm 6 mm Part number KJU02-00 KJU02-04 KJU23-04 KJU04-00 KJU04-06 KJU06-00 Bulkhead union KJE Part number KJL23-00 KJL04-00 KJL06-00 Tube outer diameter 3.
F itti n gs a n d t u bin g KQ2 – standard fittings Medium Working pressure Test pressure Operating temperature M3/M5, 1/8–1/2 Connection options tube outer diameter 3.
Fitti n gs an d tubing KQ2 – standard fittings a Straight connector KQ2F Straight union KQ2H – same diameter Straight union KQ2H – different diameter b Part number KQ2F04-G01 KQ2F04-G02 KQ2F06-G01 KQ2F06-G02 KQ2F06-G03 KQ2F08-G01 KQ2F08-G02 KQ2F08-G03 KQ2F10-G02 KQ2F10-G03 KQ2F12-G02 KQ2F12-G03 KQ2F12-G04 Tube outer diameter 4 mm 4 mm 6 mm 6 mm 6 mm 8 mm 8 mm 8 mm 10 mm 10 mm 12 mm 12 mm 12 mm Straight union KQ2H G thread 1/8 1/4 1/8 1/4 3/8 1/8 1/4 3/8 1/4 3/8 1/4 3/8 1/2 Bulkhead connector KQ2E –
F itti n gs a n d t u bin g KQ2 – standard fittings Elbow connector KQ2L Elbow connector KQ2L – G thread Elbow connector KQ2L – for female thread Part number KQ2L23-M5 KQ2L23-01S KQ2L23-02S KQ2L04-M5 KQ2L04-01S KQ2L04-02S KQ2L06-M5 KQ2L06-01S KQ2L06-02S KQ2L06-03S KQ2L08-01S KQ2L08-02S KQ2L08-03S KQ2L10-01S KQ2L10-02S KQ2L10-03S KQ2L10-04S KQ2L12-02S KQ2L12-03S KQ2L12-04S KQ2L16-03S KQ2L16-04S Tube outer diameter 3.2 mm 3.2 mm 3.
Fitti n gs an d tubing KQ2 – standard fittings Elbow connector KQ2V – banjo type 45° elbow connector KQ2K 45° elbow connector KQ2K – for female thread; for connecting tubes on top of each other Part number KQ2K04-M5 KQ2K04-01S KQ2K04-02S KQ2K06-M5 KQ2K06-01S KQ2K06-02S KQ2K06-03S KQ2K08-01S KQ2K08-02S KQ2K08-03S KQ2K10-01S KQ2K10-02S KQ2K10-03S KQ2K10-04S KQ2K12-02S KQ2K12-03S KQ2K12-04S Tube outer diameter 4 mm 4 mm 4 mm 6 mm 6 mm 6 mm 6 mm 8 mm 8 mm 8 mm 10 mm 10 mm 10 mm 10 mm 12 mm 12 mm 12 mm M o
F itti n gs a n d t u bin g KQ2 – standard fittings Elbow connector KQ2L – push-in Elbow connector KQ2L – push-in connection Tube outer diameter 3.2 mm 4 mm 6 mm 8 mm 10 mm 12 mm Part number KQ2L23-99 KQ2L04-99 KQ2L06-99 KQ2L08-99 KQ2L10-99 KQ2L12-99 Connection diameter 3.
Fitti n gs an d tubing KQ2 – standard fittings Union Tee KQ2T – same diameter Union Tee KQ2T – different diameter a Run Tee KQ2Y Run Tee KQ2Y – for female thread Part number KQ2Y23-M5 KQ2Y23-01S KQ2Y23-02S KQ2Y04-M5 KQ2Y04-01S KQ2Y04-02S KQ2Y06-M5 KQ2Y06-01S KQ2Y06-02S KQ2Y06-03S KQ2Y08-01S KQ2Y08-02S KQ2Y08-03S KQ2Y10-01S KQ2Y10-02S KQ2Y10-03S KQ2Y10-04S KQ2Y12-02S KQ2Y12-03S KQ2Y12-04S KQ2Y16-03S KQ2Y16-04S a Run Tee KQ2Y – G thread Union Tee KQ2T Tube outer diameter 3.2 mm 3.2 mm 3.
F itti n gs a n d t u bin g KQ2 – standard fittings Branch “Y” KQ2U – push-in connection Tube outer diameter 3.2 mm 4 mm 6 mm 8 mm 10 mm 12 mm Part number KQ2U23-99 KQ2U04-99 KQ2U06-99 KQ2U08-99 KQ2U10-99 KQ2U12-99 Connection diameter 3.2 mm 4 mm 6 mm 8 mm 10 mm 12 mm Branch “Y” KQ2U – push-in Branch “Y” KQ2U Branch “Y” KQ2U – for female thread Tube outer diameter 3.2 mm 3.2 mm 3.
Fitti n gs an d tubing KQ2 – standard fittings Blanking plug KQ2P – plugging connections Part number KQ2P-23 KQ2P-04 KQ2P-06 KQ2P-08 KQ2P-10 KQ2P-12 KQ2P-16 Connection diameter 3.
F itti n gs a n d t u bin g KDM – multi-connector Medium Working pressure Operating temperature Tube outer diameter 4, 6, 8 mm Compressed air, water –0.
Fitti n gs an d tubing KM – manifold Medium Max.
F itti n gs a n d t u bin g M – miniature fittings ■ Less space requirement ■ Cap nut ensures easy installation and removal of large holding force of plastic pipes ■ Extensive product range ■ Used for nylon and polyurethane tubing Series M3 Straight connector, push-on Part number Tubing M-3AU-2 Polyurethane M-3AU-3 Polyurethane M-3AU-4 Polyurethane Elbow connector, push-on 360° Outer/inner Ø 2/1.2 mm 3.18/2 mm 4/2.
Fitti n gs an d tubing M – miniature fittings Series M5 Straight connector, push-on Part number Tubing M-5AN-4 Nylon M-5AN-6 Nylon Straight connector, push-on Outer/inner Ø 4/2.5 mm 6/4 mm Thread M5 M5 Part number Tubing M-5AU-2 Polyurethane M-5AU-3 Polyurethane M-5AU-4 Polyurethane M-5AU-6 Polyurethane Elbow connector, push-on 360° Outer/inner Ø 2/1.2 mm 3.18/2 mm 4/2.
F itti n gs a n d t u bin g Pipe fittings Medium Materials Sizes Operating temperature Max.
Fitti n gs an d tubing Pipe fittings a b a Reducer socket 105 b b Reducer socket 105z Reducer socket 105 – conical Reducer socket 106 Reducer socket 106 – parallel Thread Part number WNH-01-01V WNH-01-02V WNH-01-03V WNH-02-02V WNH-02-03V WNH-02-04V WNH-03-03V WNH-03-04V WNH-04-04V WNH-04-06V a a 1/8 1/8 1/8 1/4 1/4 1/4 3/8 3/8 1/2 1/2 Thread b 1/8 1/4 3/8 1/4 3/8 1/2 3/8 1/2 1/2 3/4 Part number WNH-M5V-F01V WNH-F01V-F02V WNH-F01V-F03V WNH-F01V-F04V WNH-F02V-F03V WNH-F02V-F04V WNH-F03V-F04V WNH-F
F itti n gs a n d t u bin g Pipe fittings Branch Tee 111 Branch Tee 112 Branch Tee 113 – male-female-female thread Branch Tee 111 – female thread Part number WNT-F01V-F01V-F01V WNT-F02V-F02V-F02V WNT-F03V-F03V-F03V WNT-F04V-F04V-F04V WNT-F06V-F06V-F06V WNT-F10V-F10V-F10V Branch Tee 113 Thread G1/8 G1/4 G3/8 G1/2 G3/4 G1 Part number WNT-01-F01V-F01V WNT-02-F02V-F02V WNT-03-F03V-F03V WNT-04-F04V-F04V WNT-06-F06V-F06V WNT-10-F10V-F10V Thread 1/8 1/4 3/8 1/2 3/4 1 Branch Tee 112 – female-male-female t
Fitti n gs an d tubing Pipe fittings Barb fitting 119 Barb fitting 119/z Barb fitting 119 – conical thread Part number WNB-01-T06 WNB-02-T06 WNB-01-T07 WNB-02-T07 WNB-01-T08 WNB-02-T08 WNB-01-T09 WNB-02-T09 WNB-03-T09 WNB-04-T09 WNB-01-T10 WNB-02-T10 WNB-03-T10 WNB-04-T10 WNB-02-T12 WNB-03-T12 WNB-04-T12 WNB-03-T14 WNB-04-T14 WNB-03-T16 WNB-04-T16 WNB-04-T17 WNB-04-T18 Barb fitting 119/z – male parallel thread Tube diameter 6 mm 6 mm 7 mm 7 mm 8 mm 8 mm 9 mm 9 mm 9 mm 9 mm 10 mm 10 mm 10 mm 10 mm 12 m
F itti n gs a n d t u bin g Pipe fittings Branch “Y” 125 Branch “Y” 126 Branch “Y” 125 – male-female-female conical thread Part number WNY-01-F01V-F01V WNY-02-F02V-F02V WNY-03-F03V-F03V WNY-04-F04V-F04V Thread 1/8 1/4 3/8 1/2 Bulkhead union 127 Branch “Y” 126 – female thread Part number WNY-F01V-F01V-F01V WNY-F02V-F02V-F02V WNY-F03V-F03V-F03V WNY-F04V-F04V-F04V Thread G1/8 G1/4 G3/8 G1/2 Cross 128 Bulkhead union 127 Cross 128 – male conical thread Part number WNE-F04V-M28 WNE-M5V-M10 WNE-F01V-M1
Fitti n gs an d tubing KS & KX – rotation fittings Medium Working pressure Test pressure Operating temperature Tube diameter Required torque Max. revolutions, KS Max. revolutions, KX Compressed air –100 kPa to 1 MPa (–1 bar to 10 bar) 3 MPa (30 bar) 0 to 60 °C Ø4 Ø6 Ø8 Ø10 0.006 Nm 0.012 Nm 0.014 Nm 0.020 Nm 500 rpm 500 rpm 400 rpm 300 rpm 1500 rpm 1200 rpm 1200 rpm 1000 rpm KSL KSH Ø12 0.
F itti n gs a n d t u bin g KQB2 – brass fittings Medium Materials Working pressure Temperature Lubrication Air and water Nickel plated brass; release bush in stainless steel (SUS304) Seals: FKM –100 kPa to 1.
Fitti n gs an d tubing KQB2 – brass fittings Bulkhead connector KQB2E Bulkhead union KQB2E Bulkhead connector KQB2E Elbow connector KQB2L – for female thread – for going through walls Part number KQB2E23-02 KQB2E04-01 KQB2E04-02 KQB2E06-01 KQB2E06-02 KQB2E06-03 KQB2E08-01 KQB2E08-02 KQB2E08-03 KQB2E10-02 KQB2E10-03 KQB2E12-03 KQB2E12-04 KQB2E16-03 KQB2E16-04 Tube outer diameter 3.
F itti n gs a n d t u bin g KQB2 – brass fittings b a a Union Tee KQB2T – same diameter Branch Tee KQB2T Branch Tee KQB2T – for female thread Part number KQB2T23-M5 KQB2T23-01S KQB2T23-02S KQB2T04-M5 KQB2T04-01S KQB2T04-02S KQB2T06-M5 KQB2T06-01S KQB2T06-02S KQB2T06-03S KQB2T08-01S KQB2T08-02S KQB2T08-03S KQB2T10-01S KQB2T10-02S KQB2T10-03S KQB2T10-04S KQB2T12-02S KQB2T12-03S KQB2T12-04S KQB2T16-03S KQB2T16-04S Union Tee KQB2T Tube outer diameter 3.2 mm 3.2 mm 3.
Fitti n gs an d tubing KQG2 – stainless fittings Medium Materials Working pressure Temperature Lubrication Air, water and steam Stainless steel (SUS316) Seals: FKM –100 kPa to 1.
F itti n gs a n d t u bin g KQG2 – stainless fittings Bulkhead union KQG2E Bulkhead union KQG2E Bulkhead connector KQG2E Elbow connector KQG2L – for female thread – for going through walls Part number KQG2E23-02 KQG2E04-01 KQG2E04-02 KQG2E06-01 KQG2E06-02 KQG2E06-03 KQG2E08-01 KQG2E08-02 KQG2E08-03 KQG2E10-02 KQG2E10-03 KQG2E12-03 KQG2E12-04 KQG2E16-03 KQG2E16-04 Tube outer diameter 3.
Fitti n gs an d tubing KQG2 – stainless fittings b a a Union Tee KQG2T – same diameter Branch Tee KQG2T Branch Tee KQG2T – for female thread Union Tee KQG2T Tube outer diameter 3.2 mm 3.2 mm 3.
F itti n gs a n d t u bin g KFG2 – stainless fittings Medium Materials Working pressure Temperature Lubrication Air, water and steam Stainless steel (SUS316L); KFG2V: sealing in FKM –100 kPa to 1.
Fitti n gs an d tubing KFG2 – stainless fittings Elbow connector KFG2L Elbow connector KFG2L – for female thread Part number KFG2L0425-01 KFG2L0425-02 KFG2L0403-01 KFG2L0403-02 KFG2L0604-01 KFG2L0604-02 KFG2L0806-01 KFG2L0806-02 KFG2L0806-03 KFG2L1075-02 KFG2L1075-03 KFG2L1075-04 KFG2L1008-02 KFG2L1008-03 KFG2L1008-04 KFG2L1209-02 KFG2L1209-03 KFG2L1209-04 KFG2L1210-02 KFG2L1210-03 KFG2L1210-04 KFG2L1613-03 KFG2L1613-04 Tube diameter Outer Inner 4 mm 2.5 mm 4 mm 2.
F itti n gs a n d t u bin g KFG2 – stainless fittings Branch Tee KFG2T Union Tee KFG2T Branch Tee KFG2T – for female thread Part number KFG2T0425-01 KFG2T0425-02 KFG2T0403-01 KFG2T0403-02 KFG2T0604-01 KFG2T0604-02 KFG2T0806-01 KFG2T0806-02 KFG2T0806-03 KFG2T1075-02 KFG2T1075-03 KFG2T1075-04 KFG2T1008-02 KFG2T1008-03 KFG2T1008-04 KFG2T1209-02 KFG2T1209-03 KFG2T1209-04 KFG2T1210-02 KFG2T1210-03 KFG2T1210-04 KFG2T1613-03 KFG2T1613-04 Tube diameter Outer Inner 4 mm 2.5 mm 4 mm 2.
Fitti n gs an d tubing KP – clean room fittings TPH – tubing for clean rooms Type Medium Working pressure Test pressure Operating temperature body stud chuck Materials guide, release bush seals tubing TPH KP KPQ Air, nitrogen, clean water Air Max. 0.7 MPa (7 bar) –0.1 to 1 MPa (–1 to 10 bar) 4 MPa (40 bar) 3 MPa (30 bar) –20 to 80 ºC –20 to 80 ºC –5 to 60 ºC — PP — PP Brass — SUS304 — PP — Polyolefin EPDM — NBR — KPG SUS304 — The above figures are at 20 °C.
F itti n gs a n d t u bin g LQ – high purity fluoropolymer fittings Medium Materials Max. operating temperature Colour Sealing Acid, alkalis, ultrapure water, etc. Perfluoroalkoxy (PFA) 200 ºC White transparent Patent pending fourfold design Note! For these fittings use TL tubing. ■ Patent pending seal design ■ Excellent heat resistance ■ Quick and easy to change the tube diameters Contact SMC for more information.
Fitti n gs an d tubing TH – fluoropolymer tubing Materials Operating temperature Colour Max. working pressure FEP –20 to 200 ºC White transparent; other colours on request See separate chart ■ Excellent heat resistance Fluoropolymer tubing Max. working pressure Inner diameter 2 mm 2.5 mm 4 mm 6 mm 7.
F itti n gs a n d t u bin g TU, TUH, T & TS – tubing Materials Polyurethane (T and TS: polyamide) Max. working pressure TU: 0.8 MPa (8 bar); T: 1.5 MPa (15 bar); TS: 1 MPa (10 bar); TUH see below Operating temperature Air –20 to 60 ºC; Water 0 to 40 ºC (not TUH) 6 mm 8 mm 10 mm 12 mm 16 mm Tube outer diameter 3.
Fitti n gs an d tubing TU, TUH, T & TS – tubing Polyurethane tubing TUH – for air (not water) Polyurethane tubing TUH – for air (not water) Single tubing, black; working pressure 0.8 MPa (8 bar) Single tubing, blue; working pressure 0.8 Mpa (8 bar) Outer Inner Part number diameter diameter TUH0428B-20 4 mm 2.8 mm TUH0428B-100 4 mm 2.8 mm TUH0644B-20 6 mm 4.4 mm TUH0644B-100 6 mm 4.4 mm TUH0858B-20 8 mm 5.8 mm TUH0858B-100 8 mm 5.8 mm TUH1073B-20 10 mm 7.3 mm TUH1073B-100 10 mm 7.
F itti n gs a n d t u bin g TUZ – friction resistant polyurethane tubing Medium Suitable fittings Max. pressure Operating temperature Materials Air KQ, KJ, KF, M, MS 0.8 MPa (8 bar) at 20 °C –20 to 60 °C Treated polyurethane ■ Long life in cable trays or other applications where the tube walls are subjected to friction ■ After 10 000 000 cycles wear in tube outer wall is approximately 0.
Fitti n gs an d tubing TCU – spiral tubing TFU – double/triple tubing Materials Max. working pressure Operating temperature Polyurethane 0.8 MPa (8 bar) –20 to 60 ºC ■ Very flexible ■ Flexibility allows compact installation TCU TFU Spiral tubing TCU – polyurethane, single tubing, black Part number TCU0425B-1 TCU0425B-2 TCU0425B-3 TCU0604B-1 TCU0604B-2 TCU0604B-3 TCU0805B-1 Max. working length L Inner iameter d 2.5 mm 2.5 mm 2.
F itti n gs a n d t u bin g TRBU – flame resistant polyurethane tubing with double layers Type Medium Max. working pressure Bending radius Operating temperature Burst pressure Inner tube Materials Outer layer Colour TRBU0604 TRBU0805 TRBU1065 Air, industrial water 0.
Fitti n gs an d tubing VMG – air gun Medium Working pressure Operating temperature Effective cross section area Connection port Port nozzle Weight Air 0 to 1 MPa ( 0 to 10 bar) 0 to 60 °C 30 mm2 (without nozzle) G1/4 or G3/8 Rc1/4 180 g ■ Large effective area – supply pressure (and air consumption) can be reduced without sacrificing power ■ Environmentally friendly – all used parts can be separated and recycled ■ Ergonomically designed ■ Shock resistant plastic Air gun Accessories Part number VMG11BU-
F itti n gs a n d t u bin g KK & KKH – quick fittings Type Medium Working pressure Test pressure Operating temperature Effective cross section area KK2 KK3/KKH3 KK4/KKH4 Air, water –100 kPa –90 kPa 0 to 1 MPa to 1 MPa to 1 MPa 1.5 MPa –5 to 60 ºC (5 to 40 ºC water) 0 to 1 MPa 3.
Fitti n gs an d tubing KK & KKH – quick fittings Socket – male thread Socket – female thread Size M5 M5 1/8 1/8 1/8 1/8 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/2 1/2 1/2 R thread M5 1/8 1/8 1/4 1/8 1/4 1/8 1/4 3/8 1/2 1/8 1/4 3/8 1/2 3/8 1/2 3/4 Socket – push-in fitting, straight connector Part number KK2S-23H KK2S-04H KK2S-06H KK3S-04H KK3S-06H KK3S-08H KK3S-10H KK4S-06H KK4S-08H KK4S-10H KK4S-12H KK6S-12H KK6S-16H Size M5 M5 M5 1/8 1/8 1/8 1/8 1/4 1/4 1/4 1/4 1/2 1/2 10 Socket – push-in, straight Size M
F itti n gs a n d t u bin g KK130 – quick fittings Medium Working pressure Operating temperature Surface treatment ■ ■ ■ ■ Air (not water) 0–1.
Fitti n gs an d tubing KK130 – quick fittings Plug/male – push-in fitting Part number KK130P-06H KK130P-08H KK130P-10H KK130P-12H Socket/female – push-in fitting Tube outer diameter 6 mm 8 mm 10 mm 12 mm Plug/male Socket/female Plug/male – cap nut Plug/male Tube outer diameter 6 mm 8 mm 10 mm 12 mm Part number KK130L-06H KK130L-08H KK130L-10H KK130L-12H Tube outer diameter 6 mm 8 mm 10 mm 12 mm Socket/female – cap nut Tube inner diameter 5 mm 6 mm 6.5 mm 8 mm 8.
F itti n gs a n d t u bin g Accessories Tube cutter Tube cutter should be used to ensure that the tubing gets a perpedicular cut, and to avoid shavings. Part number TK-3 Tube rack Part number TB-2 Tube reels (tubing ordered separately) Part number TBR-1 TBR-2 TBR-3 TBR-4 Tube diameter 4–12 mm Tube diameter 4 or 6 mm 8 mm 10 mm 12 mm Tube cutter A rugged cutter for high demands and tough use. Part number TK-1 Fitting cases – with fittings Tube removal tool For lists of included parts, contact SMC.
Others 11 443
O t her s Contents IZS31 – ionizer bar 446 IZN – nozzle type ionizer 447 IZF – ionizer fan 447 Sensors for static electricity 447 PA3000 & -5000 – diaphragm pump 448 PA3300 – fluoropolymer process diaphragm pump 448 PAX – diaphragm pump 449 PB – diaphragm pump 449 HRS – circulation chiller 450 HRZ & HRW – powerful circulation chillers 450 HEC – circulation chiller with high precision 451 HEB – thermostatic bath with high precision 451 HED – temperature control for corrosive media 4
Others About our other products W hen the SMC standard product range is not covering the customer needs, customer specific products can be developed. In this chapter we have collected some of these products that are often developed into series. As in the rest of the product overview, this is only a small selection of SMC’s customer specific products.
O t her s IZS31 – ionizer bar Design principle Function Remaining charge Effective range Supply voltage Power consumption Bar length (standard) Operating temperature Corona DC (sensor controlled), pulsed DC and DC ±30 V (stainless steel electrode: ±100 V) 50–2000 mm (sensor controlled DC: 200–2000 mm) 24 VDC 200 mA or less (depending on the mode of operation and connected sensors) 300, 380, 620, 780, 1100, 1260, 1500, 1900, 2300 mm 0 to 50 °C (35–85% relative humidity) Valid at 300 mm distance and forced
Others IZN – nozzle type ionizer Design principle Function Remaining charge Effective range Supply voltage Power consumption Operating temperature Corona High frequency AC version ±10 V with a standard nozzle Up to approx.
O t her s PA3000 & -5000 – diaphragm pump Type medium pilot air media contacts Materials diaphragm check valve Pump flow Average pump pressure Air consumption dry Suction height wet Operating temperature Weight PA3110 PA3120 PA3210 PA3220 G3/8 G1/4 Aluminum Stainless steel PTFE NBR PTFE NBR PTFE, PFA 1–20 l/min 0–0.6 MPa (0–6 bar) Max. 200 ln/min Up to 1 m (internally dry) Up to 6 m (completely filled with fluid) 0 to 60 °C (no freezing) 1.7 kg 2.2 kg Conn.
Others PAX – diaphragm pump Connection Type medium pilot air media contacts Materials Pump flow Average pump pressure Air consumption dry Limit value suction height wet Damping capacity pulsation Operating temperature Weight PAX1112 PAX1212 G1/4 or 3/8 G1/4 Aluminum Stainless steel Diaphragm: PTFE; check valve: PTFE, stainless 0.5–10 l/min 0–0.6 MPa (0–6 bar) Max. 150 ln/min Up to 2 m (internally dry) Up to 6 m (completely filled with fluid) 30% or less of max. flow pressure 0 to 60 °C (no freezing) 2.
O t her s HRS – circulation chiller Cooling water system Circulating fluid system Design Refrigerant Ambient temperature/ humidity Circulating fluid Adjustable temperature range Temperature stability Pump pressure (50/60 Hz) Tank volume Temperature Pressure Min. differential pressure incoming-outgoing Connection Power supply Noise level (50/60 Hz) Weight Water-cooled Air-cooled R407C (HFC) or R410A (HFC) Temperature 5 to 40 °C; humidity 30–70%, no condensation Water, glycol water HRS050 5 to 40 °C ±0.
Others HEC – circulation chiller with high precision Cooling capacity Temperature stability 140–1200 W ±0.01–0.03 °C ■ Suitable for pharmaceutical, machinery or electronics industry with high demands of accuracy HEB – thermostatic bath with high precision Cooling capacity Temperature stability 140 W ±0.01 °C ■ Very high accuracy ■ Peltier elements HED – temperature control for corrosive media Cooling capacity Temperature stability 300–750 W ±0.
O t her s XL – aluminium high vacuum valve Medium Materials Operating temperature Working pressure Internal leakage Leakage inside–out Pilot pressure Gas, air Body: aluminum; bellows: stainless steel SS316L; seals: FKM 5 to 60 °C 1 · 10–6 Pa 1 · 10–10 Pa 2 · 10–13 Pa 0.4–0.7 MPa (0.4–0.7 bar) For normally open, double acting or soft opening valves, heaters, and alternative sealing materials, please contact SMC.
Others XM & XY – stainless steel high vacuum valve Medium Materials Operating temperature Working pressure Internal leakage Leakage inside–out Pilot pressure Gas, air Body: stainless steel SCS13 (equiv. to SUS304); bellows: stainless steel SUS316L; seals: FKM 5 to 60 °C 1 · 10–6 Pa 1.3 · 10–10 Pa 1.3 · 10–11 Pa 0.4–0.7 MPa (0.4–0.7 bar) XM – angle valve For normally open, double acting or soft opening valves, heaters, and alternative sealing materials, please contact SMC.
O t her s LMU100 & -200 – central lubrication unit Model Supply pressure Oil tank set pressure Oil tank volume Ambient and medium temperature Solenoid valve voltage Weight LMU100 LMU200 1.0 MPa (10 bar) 0.05–0.2 MPa (0.5–2 bar) Total: 3 l; effective: 2.5 l 5 to 50 °C 24 VDC 8.4 kg 7.
Others ALD, ALDU & ALB – central lubrication systems Type Model Port size Medium Burst pressure Working pressure Working differential pressure Recommended differential pressure Recommended min. flow1 For flow Tank size Recommended oil Ambient and medium temperature Tank materials Weight 1. Differential pressure lubricator ALD600 ALD900 3/4, 1 1 1/4, 1 1/2, 2 Air 1.5 MPa (15 bar) 0.
O t her s Power supply, 24 VDC, 0.75–20 A ■ Compact quality unit ■ For mounting on DIN rail ■ Suitable for industrial use, electric linear units, sensors, relays, PLC’s, etc. ■ Input voltage 100–240 VAC, 95–250 VDC 2868635 2868648 2868651 2868664 2866310 2866323 2866381 Power supply Part number 2868635 2868648 2868651 2868664 2866310 2866323 2866381 Rated voltage/ output current 24 V/0.75 A 24 V/1.75 A 24 V/2.5 A 24 V/4.
SI units, symbols and dimensioning 12 457
SI u n its, symbols and dimensio ni ng 12 458 Common pneumatic symbols 459 Numbering of connections 460 Thread sizes 460 Expressions and definitions 461 units and designations SI 462 Units for flow 463 Dimensioning 465 Flow in tubing and fittings 466 Average air consumption 467 Maximum air flow 469 Quick selection for choosing right flow 470 Lifting force of vacuum pads 471 Evacuation time of vacuum pads 472 Mass moment of inertia 474 Subject to chan
S I u n its , s y mbo l s a n d dime n sio n i n g Common pneumatic symbols Valve control, solenoid pilot valve Supply of compressed air (1 or P) 2 2/2 valve, normally closed, monostable, push button-controlled with spring return Exhaust (3, 5 or E, R) 1 2 Silencer 3/2 valve, normally closed, monostable, pressure-controlled with spring return 12 3 1 2 Filter with manual water drain 3/2 valve, normally closed 3 1 Filter with automatic water drain 2 3/2 valve, normally open Pressure regulator wi
SI u n its, symbols and dimensio ni ng Numbering of connections Explanation of how the different connections on the pneumatic components are named. Port number: 1 (P) Inlet, usually related to mains air supply. 2 (B) Outlet to consumers. 3 (R, E) Drain exhaust. 4 (A) Outlet to consumers. 5 (R, E) Drain exhaust. 3, R 1, P 10 Connection for impulse that closes the valve. Only 3/2 N.O. 12 Connection for impulse that combines inlet 1 with outlet 2.
S I u n its , s y mbo l s a n d dime n sio n i n g Expressions and definitions A short glossary of common terms and definitions in pneumatics. Cylinders Valves Double acting cylinder where the piston movement in both directions occurs through the influence of pressurized medium. Single acting cylinder where the piston movement in one direction is done by the influence of pressurized medium and in the other direction by some other force (spring).
SI u n its, symbols and dimensio ni ng SI units and designations The SI system is based on seven basic units that can be combined to derived units. Here are the units that are common in pneumatics. In the SI system, the units are made larger or smaller by using a prefix to indicate orders of magnitude. Common prefixes are found in the table on the right. Units for pressure Pressure in pascal (bar is an older term used less and less). 1 bar = 100 000 Pa (pascal) = 100 kPa (kilopascal) = 0.
S I u n its , s y mbo l s a n d dime n sio n i n g Units for flow Comparison and conversion between different international flow units. 0.015 0.2 8 3 01 .5 0. 5 1. 98 54 5 14 07 0. 1.206 .3 9 0.829 25 1. 18 1 Qn – normal flow rate S 0.055 00 In all cases, based on a data flow performance on the so-called normal volume. It is the volume of air occupied at atmospheric pressure, 20 °C and relative humidity of 65% (normal air). This volume is frequently given in ln resp Nm3.
SI u n its, symbols and dimensio ni ng p1 Pressure regulator Flow meter Pressure gauge p2 Measuring object Pressure gauge Adjustable flow controller C value kv value C value (conductance) is the unit that ISO and the current standard uses to indicate flow. One way to find out a product’s C value is dividing the product’s maximum flow rate (Qn) with the absolute inlet pressure (P1a). The unit is liter/second/bar. Qn ≈ C · 270. The factor 270 will vary depending on the product’s b value.
S I u n its , s y mbo l s a n d dime n sio n i n g Dimensioning Get help to calculate the cylinder size that is best suited for each task. C ylinder force can be determed by using the table or the following formulas below to calculate the theoretical cylinder power: F=P·A A= π · d2 4 F = force (N) P = pressure (MPa) d = cylinder bore (mm) A = area (mm2) At retraction, the force is lower because the rod reduces the available piston area.
SI u n its, symbols and dimensio ni ng Flow in tubing and fittings A simple quick reference sheet to calculate the air flow in tubes of varying lengths and dimensions. The flow (Qn) is given in ln/min. i.e.: IN = 0,6 MPa and OUT = 0,5 MPa. Tubing (outer/inner diam.) 3.2 mm/2 mm with fittings 4 mm/2.5 mm with fittings 6 mm/4 mm with fittings 8 mm/5 mm with fittings 8 mm/6 mm with fittings 10 mm/8 mm with fittings 12 mm/9 mm with fittings 12 466 0.
S I u n its , s y mbo l s a n d dime n sio n i n g Average air consumption How to calculate the average air consumption of cylinders and air lines. Y Chart 1 – cylinder air consumption per cycle 1 000 1 000 50 40 30 32 5 0 12 10 5 4 3 80 20 16 10 2 1.5 63 2 1.5 50 40 6 1 10 0 25 10 20 15 B 16 20 15 5 4 3 100 50 40 50 40 30 200 150 0.6 2 000 1 500 20 16 1 000 A 10 Stroke (mm) 32 1. Use chart 1 and find the point where the working pressure line (0.
SI u n its, symbols and dimensio ni ng Air consumption for air tubing Air consumption – or flow – indicated in normal liters per minute (ln/min). 1 normal liter is 1 dm3 air at “room environment” (normal atmospheric pressure, temperature 20 °C and a relative humidity of 65%). 5. Use chart 2 and find the point where the working pressure line (0.5 MPa) crosses the line for air tubing length (2 m). See point C. 6. From point C, go straight up until you cross the line for air tubing inner diameter (6 mm).
S I u n its , s y mbo l s a n d dime n sio n i n g Maximum air flow How to calculate the maximum air flow in cylinders and air tubing. 10 000 16 0 12 5 0 80 63 10 200 150 100 50 10 40 20 10 16 1 000 10 5 4 3 2 E 1 6 Maximum piston speed (mm/s) 25 32 2 000 1 500 50 40 30 20 15 6 10 8 500 400 300 300 16 20 15 500 400 20 50 40 30 25 100 32 200 150 1 000 F Maximum air flow (ln/min) 40 0.5 200 100 2 0. 3 0. 4 0. .6 5 0 0. .8 7 0 Working pressure (MPa) 0.
SI u n its, symbols and dimensio ni ng Quick selection for choosing right flow If you do not make an estimate of cylinder air consumption by the methods shown on previous pages, the following speed selection table provide benchmarks for dimensioning. N The table below shows the maximum air flow (in normal liters per minute [ln/min]) a cylinder needs. This value depends on the cylinder piston diameter and operating speed. The table is applicable at a pressure of 0.
S I u n its , s y mbo l s a n d dime n sio n i n g Lifting force of vacuum pads How to calculate the theoretical lifting force of vacuum pads at different vacuum. T o be able to choose the correct dimensions on the vacuum pads, you should know the different vacuum pads theoretical lifting force at different vacuum levels. Here we present formulas and a table that you can use as a basis for your calculations.
SI u n its, symbols and dimensio ni ng Evacuation time of vacuum pads How to calculate evacuation time for vacuum pads, and choosing ejector and tubing. Calculation of evacuation time Average suction flow in ejector Q1 = 0.4 · Qmax Tubing maximum flow 1. Calculate ejector’s average suction flow (Q1) by multiplying the maximum suction flow by 0.4. Q2 = S · 11.1 Tubing volume between ejector and vacuum pad V = 1 ÷ 1 000 · π ÷ 4 · D2 · L 2.
S I u n its , s y mbo l s a n d dime n sio n i n g Connection examples EXH Individual control of ejector and release Switching between vacuum and release Switching between vacuum and release – on suction side Common exhaust Instructions Subject to change Supply connection (supply): Dimension supply line, valves and connections considering the ejector’s air consumption (see technical data). Vacuum ejector (vac): the tubing between ejector and vacuum pad should be as short as possible.
SI u n its, symbols and dimensio ni ng Mass moment of inertia When dimensioning a rotary actuator you must, in addition to necessary torque, also consider the load’s mass moment of inertia. For your aid, please find the formulas below (dimensions in meters). 1. Thin axle, excentrically suspended a12 a2 + m2 · 2 3 3 J=m· a2 3. Thin rectangular plate, on edge and centered a J = m1 · 5. Thin rectangular plate, lying down and centered J=m· a2 + b2 12 a1 a2 b 4a12 + b2 4a 2 + b2 + m2 · 2 12 12 6.
Training 13 475
T r ain in g SMC Industrial Training Program P neumatics have an important role in many branches of industry. Due to its affordable, clean, compact and durable power you will find a large proportion of pneumatic components in many applications. The use of pneumatics in an effective and optimal way; however, requires a good basic knowledge of the discipline. The SMC Industrial Training Program provides you the knowledge and skills needed to use pneumatics in a comprehensive way.
T r ain i n g Energy Saving in pneumatic systems (1 day) SMC has many years of experience in the area of Energy Saving in pneumatic systems. In this training, SMC will go through the entire system from the compressor to the pneumatic actuators and spot the critical applications. The trainee will learn to look with an ”energy-efficient eye” into his pneumatic installation. There are various measures available to reduce air consumption without making machine performance concessions.
Product index 479
P r odu ct in dex 0–9 55-CDG1 224 55-CG1 224 AC-XSE 20 A AF 17 AF 26 AFD 19 AFM 19 Air gun 436 AK 44 AKB 44 AKH 44 AL 19 ALB 455 ALD 455 ALDU 455 ALIP1000 454 ALIP1100 454 AM 24 AMC 27 AMD 24 AMG 24 AMH 24 AMJ 376 AN 19 AN 34 AQ 43 AR 17 AR 28 ARG 19 ARJ 29 ARM 28 AR-P 22 ARP 30 ARX 29 AS 39 AS-D 41 ASD 43 AS-FE 42 AS-FG 41 AS-FM 42 ASN 44 ASP 43 ASQ 45 ASR 45 ASS 45 ASV 43 AW 18 AWG 19 C C55 191 C85 187 C85K 189 C85W 189 C96 196 Cables 177 CBQ2 220 480 CD55 191 CD85 187 CD85K 189 CD85W 189 CDG1 221
P r od u ct i n dex K KDM 409 KEA 43 KFG2 425 KJ 399 KK 437 KK130 439 KKA 440 KKH 437 KM 410 KP 428 KQ2 401 KQB2 419 KQG2 422 KS 418 KX 418 L LC3F 346, 348 LC6 338 LDZ 347 LEC-IO-CB01 329 LECP1 330 LECP6 330 LEC-T1-3EGS 329 LEC-W1 329 LEFB 328 LEFS 327 LEHF 321 LEHS 322 LEHZ 321 LER 326 LES 323 LEY 324 LEYG 325 LG1 339 LG-240Z 341 LJ1 339 LMU100 454 LMU200 454 LQ 429 LQ-G 429 LTF 340 LVA 137 LVC 137 LVH 138 LVM09 139 LVM10 139 LVM15 140 LVM090 139 LVM100 139 LVM150 140 LVQ 138 LXF 333 LXP 334 LXS 336 LZ
P r odu ct in dex TS 431 TU 431 Tubing and fitting accessories 441 TUH 431 TUZ 433 V V110 121 V111 120 V114 120 Vacuum switches 383 VBA 35 VBAT 35 VCA 143 VDW10 141 VDW20 141 VDW30 141 VDW200 142 VDW300 142 VF3000 79 VF5000 79 VFN 109 VFS 110 VG342 129 VGA342 134 482 VH 131 VHK 131 VHS 19 VKF300 126 VM 131 VMG 436 VNB 157 VND 157 VO307 125 VP 127 VP-X538 23 VPA 133 VQ7-6 113 VQ7-8 115 VQ20 130 VQ30 130 VQ5000 98 VQC1000 86 VQC2000 90 VQC4000 94 VQD1000 64 VR 131 VSR8 111 VSS8 111 VV2CA 143 VV2Q 130 V
Terms of Delivery General delivery and payment conditions Applicable to all offers and contract concerning deliveries and/or services to be executed by SMC Pneumatics BV are the ORGALIME (S2000) general terms and conditions for delivery of metal, electro technical and associated electronic products. A copy of these conditions (August 2000 edition) will be sent free on request. In addition, the following conditions apply to all services and supplies, unless otherwise agreed in writing.
www.smcpneumatics.be Product Overview OVBE-01A-UK SMC Pneumatics N.V./S.A. Nijverheidsstraat 20 B-2160 Wommelgem Phone : +32 (0)3 355 14 64 Fax : +32 (0)3 355 14 66 info@smcpneumatics.be www.smcpneumatics.
