Brochure

ManualsBrandsSMC ManualsAccessoriesReplacement Filter

Table Of Contents

AC40C-AAC20C-A

Description

Symbol

25 30 4020

Body size

q

1/8

Air

– 5 to 60°C (with no freezing)

1.5 MPa

1.0 MPa

0.05 MPa

0.05 to 0.7 MPa

AF: 5 µm, AFM: 0.3 µm (99.9% filtered particle size)

MAX 1.0 mg/m

(ANR) (≈0.8 ppm)

Note 2) Note 3)

Polycarbonate

Relieving type

450

0.67

200

Semi-standard (Steel)

0.38

Standard (Polycarbonate)

450

0.82

1100

1.26

1100

1.42

Model

Component

Port size

Pressure gauge port size

Fluid

Ambient and fluid temperature

Proof pressure

Maximum operating pressure

Minimum operating pressure

Set pressure range

Nominal filtration rating

Outlet side oil mist concentration

Rated flow (L/min (ANR))

Note 1)

Bowl material

Bowl guard

Regulator construction

Weight (kg)

Air filter

Mist separator

Regulator

AC40C-06-A

AF40-06-A

AFM40-06-A

AR40-06-A

3/4

AC40C-A

AF40-A

AFM40-A

AR40-A

1/4, 3/8, 1/2

AC30C-A

AF30-A

AFM30-A

AR30-A

1/4, 3/8

AC25C-A

AF30-A

AFM30-A

AR25-A

1/4, 3/8

AC20C-A

AF20-A

AFM20-A

AR20-A

1/8, 1/4

Note 1) Conditions: Mist separator inlet pressure: 0.7 MPa; The rated flow varies depending on the inlet pressure.

Keep the air flow within the rated flow to prevent an outflow of lubricant to the outlet side.

Note 2) When the compressor oil mist discharge concentration is 30 mg/m

(ANR).

Note 3) Bowl O-ring and other O-rings are slightly lubricated.

Standard Specifications

Nil

Note 9)

Pressure unit

Semi-standard





Note 10)





Note 10)





Note 10)





Note 10)

Name plate and pressure gauge in imperial units: MPa

Name plate, caution plate for bowl, and pressure gauge in imperial units: psi, °F

Nil

Flow directioni



Flow direction: Left to right

Flow direction: Right to left

Note 1) Option G, M are not assembled and supplied

loose at the time of shipment.

Note 2) When pressure is not applied, condensate

which does not start the auto drain

mechanism will be left in the bowl. Releasing

the residual condensate before ending

operations for the day is recommended.

Note 3) If the compressor is small (0.75 kW,

discharge flow is less than 100 L/min[ANR]),

air leakage from the drain cock may occur

during start of operations. N.C. type is

recommended.

Note 4) When the pressure gauge is attached, a

1.0 MPa pressure gauge will be fitted for

standard (0.7 MPa) type. 0.4 MPa pressure

gauge for 0.2 MPa type.

Note 5)

The bracket position varies depending on the

T-shaped spacer or pressure switch mounting.

Note 6) Make sure that the outlet pressure is

released to atmospheric pressure using a

pressure gauge.

Note 7) Pressure can be set higher than the

specification pressure in some cases, but

use pressure within the specification range.

Note 8) Without a valve function.

Note 9) For thread type: NPT. This product is for

overseas use only according to the new

Measurement Law. (The SI unit type is

provided for use in Japan.)

MPa and psi are shown together on the

pressure unit.

Round pressure gauge (with color zone):

Cannot be used with M. Available by request

for special.

Note 10) : For thread type: NPT only.

Air Combination

Series AC20C-A to AC40C-A

AF＋AR＋ALAW＋ALAF＋ARAF＋AFM＋ARAW＋AFM

AFM / AFD

ARALAW Attachment