Speed Controller with Indicator New Numerical indication of handle rotation for flow rate reduces flow setting time and setting errors! Indicator window Numerical indication of handle rotation Body size 1 Body size 2 or larger Indicator Number of window needle rotations Indicator Number of window needle rotations 1 1 1 1 2 2 2 2 8 8 10 10 Elbow RoHS Brass Stainless steel 1 1 Electroless nickel plating Two indicator window directions available Indicator window Indicator window Ind
Series AS-FS Flow rate reproducibility Improved reproducibility of flow rate Stable handle position when fully closed (no flow rate) onto the contact face stopper (rotating stopper).
Speed Controller with Indicator/Elbow Type Series Variations Applicable tubing O.D. Seal method Body size Metal parts material Applicable tubing material 3/8 · Brass/ Steel wire Nylon (Series T, TIA) 1/2 Soft nylon · Stainless steel (Series TS, TISA) Port size Metric size 2 Gasket seal 3.2 4 6 8 Inch size 10 12 16 1/8" 5/32" 1/4" 5/16" 3/8" 1/2" M5 x 0.
Speed Controller with Indicator/ Elbow Type AS-FS Series RoHS Elbow Brass 1 Electroless nickel plating Model Applicable tubing O.D. Model Port size Elbow type AS12쏔1FS쏔-M5쏔 M5 x 0.8 AS12쏔1FS쏔-U10/32쏔 10-32UNF Gasket seal Note 3) Metric size Seal method Inch size 2 Note 2) 3.
Speed Controller with Indicator/Elbow Type Series AS-FS Brass Elbow 1 Electroless nickel plating How to Order Applicable tubing O.D. Note 1) 02 23 04 06 Width across flats (H) Body size M5 x 0.8 10-32UNF 1 M5 x 0.8 10-32UNF Body size 1 AS 1 2 0 1F S M5 E 06 Body size 2/3/4 AS 2 2 0 1F S 01 06 S 1/8, 1/4 3/8 1/2 Uni-AS-FS With indicator Body size 2 3 4 ø1/8" ø5/32" ø1/4" Note 1) For selecting applicable tubing O.D., refer to the “Model” on page 3.
Series AS-FS Needle Valve/Flow-rate Characteristics 01, 23 100 11 03, 04 10, 200 Inlet pressure: 0.5 MPa 500 400 09, 06, 07, 08, 09, 10 Flow rate L/min (ANR) 01, 2 50 600 Inlet pressure: 0.5 MPa 7 06, 0 , 04, 3, 03 02 AS2201FS:-02, AS2211FS:-02 08, 300 Inlet pressure: 0.
Speed Controller with Indicator/Elbow Type Series AS-FS Construction 8 Seal method: Sealant For R, NPT thread . 8 . AS-FS Seal method: Gasket seal For M5, 10-32UNF : : = = > ; 2 B B @ Meter-out type @ Meter-in type Meter-out type Uni-AS-FS Meter-in type 2 AS-FSG ; > Seal method: Face seal For G thread 8 . Meter-in type : = > 2 ; B @ Meter-out type Component Parts No.
Series AS-FS Dimensions Seal method: Gasket seal For M5, 10-32UNF Indicator direction: 0° W1 øD3 Indicator direction: 180° W2 Y X L3 øD1 L4 A Applicable tubing O.D. ød M L1 L2 H (Width across flats) T Metric Size Model (mm) d AS12쏔1FS쏔-M5E-02 2 AS12쏔1FS쏔-U10/32E-02 AS12쏔1FS쏔-M5E-23 3.2 AS12쏔1FS쏔-U10/32E-23 AS12쏔1FS쏔-M5E-04 4 AS12쏔1FS쏔-U10/32E-04 AS12쏔1FS쏔-M5E-06 6 AS12쏔1FS쏔-U10/32E-06 T H D1 D3 5.8 M5 x 0.8 10/32UNF L1 L2 15.8 20.3 17.2 21.7 7.
Speed Controller with Indicator/Elbow Type Series AS-FS Seal method: Sealant For R, NPT thread Indicator direction: 0° AS-FS Dimensions Indicator direction:: 180° W2 W1 X øD3 Y L3 AS-FSG øD1 L4 A Applicable tubing O.D.
Series AS-FS Dimensions Seal method: Face seal For G thread Indicator direction: 0° Indicator direction: 180° W2 W1 øD3 X Y L3 øD1 L4 A Applicable tubing O.D.
Series AS-FS Elbow Made to Order Brass 1 Electroless nickel plating to Made Order -X12 2 Grease-free (Seal: Fluorine-coated) + Restrictor (Without check valve) Example) AS2201FS-01-04S-X12 Example) AS2201FS-01-04S-X21 X12 X21 Laser printing Laser printing 3 Restrictor (Without check valve) -X214 -X21 4 Note 1) Not particle-free Note 2) The restrictor is only compatible with the part number of the meter-out type. Note 3) Only the needle and O-ring are fluorine-coated.
Speed Controller with Indicator/ Elbow Type: Stainless Steel Type AS-FSG Series RoHS Elbow Stainless steel 1 Model Applicable tubing O.D. Model Port size Elbow type AS12쏔1FSG쏔-M5 M5 x 0.8 AS12쏔1FSG쏔-U10/32 10-32UNF Gasket seal Note 3) Metric size Seal method Inch size 2 Note 2) 3.
Speed Controller with Indicator/Elbow Type Stainless Steel Type AS-FSG Series Elbow Stainless steel 1 How to Order Metric size 02 23 04 06 1 M5 x 0.8 10-32UNF Body size 1 AS 1 2 0 1F S G M5 06 Body size 2/3/4 AS 2 2 0 1F S G 01 06 S ø1/8" ø5/32" ø1/4" 1/8, 1/4 3/8 1/2 Uni-AS-FS With indicator Body size 2 3 4 01 03 07 AS-FSG M5 U10/32 M5 x 0.8 10-32UNF Inch size ø2 ø3.2 Note 2) ø4 ø6 Note 1) For selecting applicable tubing O.D., refer to the “Model” on page 11.
Series AS-FSG Needle Valve/Flow-rate Characteristics AS1201FSG:-M5, AS1211FSG:-M5 300 Inlet pressure: 0.5 MPa AS2201FSG:-02, AS2211FSG:-02 600 Inlet pressure: 0.5 MPa Inlet pressure: 0.
Speed Controller with Indicator/Elbow Type Stainless Steel Type Series AS-FSG Construction 8 Seal method: Sealant For R, NPT thread . 8 . AS-FS Seal method: Gasket seal For M5, 10-32UNF : : = = > ; 2 B B @ @ Meter-out type Meter-in type Meter-out type Uni-AS-FS Meter-in type 2 AS-FSG ; > Seal method: Face seal For G thread 8 . Meter-in type : = > 2 ; B @ Meter-out type Component Parts No.
Series AS-FSG Dimensions Seal method: Gasket seal For M5, 10-32UNF Indicator direction: 0° W1 øD3 Indicator direction: 180° W2 Y X L3 øD1 L4 A Applicable tubing O.D. ød M L1 L2 H (Width across flats) T Metric Size Model AS12쏔1FSG쏔-M5-02 AS12쏔1FSG쏔-U10/32-02 AS12쏔1FSG쏔-M5-23 AS12쏔1FSG쏔-U10/32-23 AS12쏔1FSG쏔-M5-04 AS12쏔1FSG쏔-U10/32-04 AS12쏔1FSG쏔-M5-06 AS12쏔1FSG쏔-U10/32-06 (mm) d T H 2 3.2 4 D1 D3 5.8 M5 x 0.8 10/32UNF L1 L2 15.8 20.3 17.2 21.7 7.
Speed Controller with Indicator/Elbow Type Stainless Steel Type Series AS-FSG Dimensions Indicator direction: 0° W1 Indicator direction: n: 180° W2 X øD3 AS-FS Seal method: Sealant For R, NPT thread Y L3 AS-FSG øD1 L4 A Applicable tubing O.D.
Series AS-FSG Dimensions Seal method: Face seal For G thread Indicator direction: 0° W1 øD3 Indicator direction: 180° W2 X Y L3 øD1 L4 A Applicable tubing O.D.
Series AS-FSG Elbow Stainless steel Made to Order 1 to Made Order -X12 2 Grease-free (Seal: Fluorine-coated) + Restrictor (Without check valve) Example) AS2201FSG-01-04S-X12 Example) AS2201FSG-01-04S-X21 X12 X21 Laser printing Laser printing 3 Restrictor (Without check valve) -X214 -X21 4 Note 1) Not particle-free Note 2) The restrictor is only compatible with the part number of the meter-out type. Note 3) Only the needle and O-ring are fluorine-coated.
Speed Controller with Indicator/ Elbow Type: Uni Thread Type Series AS-FS Elbow Brass 1 Electroless nickel plating New-stand male threads for piping that reduces the screw-in time by 1/3.
Speed Controller with Indicator/Elbow Type Uni Thread Type AS-FS Series Brass Elbow 1 Electroless nickel plating How to Order 1/2 With indicator Type 2 Applicable tubing O.D. Note 1) Elbow Metric size Control type Note) 0 1 Meter-out Meter-in Note) Meter-out and meter-in types can be visually identified by color of the handle. Meter-out: Gray Meter-in: Light blue Inch size Tubing O.D. 23 ø3.
Series AS-FS Construction Elbow type AS22쏔1FS쏔-U01-06A . 8 : = ; > 2 Meter-out type Meter-in type 21 Component Parts No.
Speed Controller with Indicator/Elbow Type Uni Thread Type Series AS-FS Dimensions Indicator direction: 0° Indicator direction: 180° W1 øD3 W2 AS-FS Seal method: Gasket seal For Uni thread Y X L3 AS-FSG øD1 L4 A Applicable tubing O.D.
AS-FS Specific Product Precautions 1 Series Be sure to read this before handling. Refer to the back cover for Safety Instructions. For Flow Control Equipment Precautions, refer to “Handling Precautions for SMC Products” and the Operation Manual on SMC website, http://www.smcworld.com Design and Selection Warning Warning 1. Check the specifications. The products in this catalog are designed to be used in compressed air systems (including vacuum) only.
AS-FS Specific Product Precautions 2 Series Be sure to read this before handling. Refer to the back cover for Safety Instructions. For Flow Control Equipment Precautions, refer to “Handling Precautions for SMC Products” and the Operation Manual on SMC website, http://www.smcworld.com Mounting Warning 13. Do not use body A for applications involving continuous rotation. Body A and the fitting section may be damaged. Tightening method 1.
AS-FS Specific Product Precautions 3 Series Be sure to read this before handling. Refer to the back cover for Safety Instructions. For Flow Control Equipment Precautions, refer to “Handling Precautions for SMC Products” and the Operation Manual on SMC website, http://www.smcworld.
AS-FS Specific Product Precautions 4 Series Be sure to read this before handling. Refer to the back cover for Safety Instructions. For Flow Control Equipment Precautions, refer to “Handling Precautions for SMC Products” and the Operation Manual on SMC website, http://www.smcworld.com Mounting Piping Threads with Sealant Caution Caution 1. This product has a stopper for fully close in rotating direction. Excess torque may break the stopper. Table below shows the maximum allowable torque of the handle.
Safety Instructions Caution: Warning: Danger : These safety instructions are intended to prevent hazardous situations and/or equipment damage. These instructions indicate the level of potential hazard with the labels of “Caution,” “Warning” or “Danger.” They are all important notes for safety and must be followed in addition to International Standards (ISO/IEC) 1), and other safety regulations.
