Datasheet
-XA쏔
-XB10
-XC2(A)
-XC8
-XC9
-XC10
-XC11
-XC26
-X1876
Symbol
Non-rotating rod
Made to Order
(For details, refer to pages 201 to 235.)
Special rod end shape
Intermediate stroke (Exclusive body type): ø40 to ø63
Rod end length,10 mm increased (For foot and flange bracket)
Adjustable stroke cylinder/Adjustable extension type
Adjustable stroke cylinder/Adjustable retraction type
Dual stroke cylinder/Double rod
Dual stroke cylinder/Single rod
With split pins for double clevis pin/
double knuckle joint pin and flat washers
Cylinder tube: With concave boss on head side
Symbol Specifications
• Auto switch proper mounting position
(detection at stroke end) and its mounting
height
• Minimum stroke for auto switch mounting
• Operating range
• Auto switch mounting brackets/Part no.
Refer to pages 193 to 199 for the specifications
of cylinders with autoswitches.
Action
Fluid
Proof pressure
Maximum operating pressure
Minimum operating pressure
Ambient and fluid temperature
Lubrication
Piston speed
Allowable kinetic energy (J)
Stroke length tolerance
Rod non-rotating accuracy
Bore size (mm)
12 16 20 25 32 40 50 63
∗ ø12 with auto switch: With rubber bumper (Standard)
Note 1) For cylinders with rubber bumper (ø12 with auto switch only)
Note 2) Stroke length tolerance does not include the amount of bumper change.
0.022
0.043
Note 1)
0.038 0.055 0.09 0.15 0.26
Double acting, Single rod
Air
1.5 MPa
1.0 MPa
Not required (Non-lube)
50 to 500 mm/s
0.46 0.77
0.07 MPa 0.05 MPa
Without auto switch: –10 to 70°C (No freezing)
With auto switch: –10 to 60°C (No freezing)
±2° ±1° ±0.8°
+1.0 mm
0
Note 2)
Specifications
(mm)
Bore size
12, 16
20, 25
32, 40
50, 63
Standard stroke
5, 10, 15, 20, 25, 30
5, 10, 15, 20, 25, 30, 35, 40, 45, 50
5, 10, 15, 20, 25, 30, 35, 40, 45, 50, 75, 100
10, 15, 20, 25, 30, 35, 40, 45, 50, 75, 100
Standard Strokes
Type A spacer is installed in the standard stroke body.
Part no.
Refer to “How to Order” for the standard model number. (P. 94)
Strokes in 1 mm intervals are available by installing a spacer in the
standard stroke cylinder.
Description
Bore size
12, 16
20, 25
32 to 63
Stroke range
Stroke range
1 to 29
1 to 49
1 to 99
Part no.: CQ2KB50-57DZ
CQ2KB50-75DZ with 18 mm width spacer inside
The B dimension is 115.5 mm.
Example
Manufacture of Intermediate Strokes
Bore size (mm) 12
쎲
—
쎲
—
—
—
쎲
쎲
Mounting
Built-in magnet
Rod end male thread
With boss on head end
Piping
Through-hole (Standard)
Both ends tapped
Pipe
thread
Built-in one-touch fittings
M5
16
쎲
—
쎲
—
—
—
쎲
쎲
M5
20
쎲
—
쎲
—
—
—
쎲
쎲
M5
25
쎲
—
쎲
—
—
—
쎲
쎲
M5
32
쎲
—
쎲
NPT1/8
G1/8
쎲
쎲
40
쎲
쎲
쎲
NPT1/8
G1/8
ø6/4
쎲
쎲
Rc1/8
50
쎲
쎲
쎲
NPT1/4
G1/4
ø8/6
쎲
쎲
Rc1/4
63
쎲
쎲
쎲
NPT1/4
G1/4
ø8/6
쎲
쎲
Rc1/4
Note 1)
M5
Rc1/8
ø6/4
Note 2)
—
TN
TF
Note 1) ø32 without auto switch: M5 is used for 5 mm strokepiping dimension.
Thus, do not enter a symbol for the port thread type.
Note 2) The dimensions of the ø32-5 mm stroke with built-in one-touch fittings are the same as those of
the 10 mm stroke cylinder tube.
Type
Pneumatic
Series CQ2K
95