Datasheet

ManualsBrandsSMC ManualsActuatorsCylinder, Double Acting, Single Rod, 75mm, Bore Size 32mm G1/8

Action

Fluid

Proof pressure

Maximum operating pressure

Minimum operating pressure

Ambient and fluid temperature

Lubrication

Piston speed

Stroke length tolerance

Standard

With rubber bumper

Bore size (mm)

12 16 20 25 32 40 50 63 80 100

Note) Stroke length tolerance does not include the amount of bumper change.

-XA

-XB6

-XB7

-XB9

-XB10

-XB10A

-XB11

-XB13

-XB14

-XC2(A)

-XC4

-XC6

-XC8

-XC9

-XC10

-XC11

-XC26

-XC27

-XC35

-XC36

-XC85

-XC92

-X144

-X202

-X203

-X271

-X525

-X526

-X636

-X1876

Special rod end shape

Heat resistant cylinder (–10 to 150°C) w/o auto switch only

Cold resistant cylinder (–40 to 70°C) w/o auto switch only

Low-speed cylinder (10 to 50 mm/s)

Intermediate stroke (Exclusive body type)

Intermediate stroke (Spacer-installed type)

Long stroke (Air-hydro type only)

Low-speed cylinder (5 to 50 mm/s)

Cylinder with heat resistant auto switch ø16 to ø63 only

Rod end length, 10mm increased (For foot and flange bracket)

With heavy-duty scraper, ø20 to ø100 only

Piston rod/Retaining ring/Rod end nut

material: Stainless steel

Adjustable stroke cylinder/Adjustable extension type

Adjustable stroke cylinder/Adjustable retraction type

Dual stroke cylinder/Double rod

Dual stroke cylinder/Single rod

With split pins for double clevis pin/

double knuckle joint pin and flat washers

Double clevis pin/Double knuckle joint pin

material: Stainless steel 304

With coil scraper, ø32 to ø100 only

With boss on rod side

Grease for food processing equipment

Dust resistant actuator

Special port location, with auto switch ø12 to ø25 only

Full length dimension is the same as Series CQ1, Except ø16, ø25.

L dimension from rod cover is the same as Series CQ1, ø20, ø32 only.

Fluororubber seals

Long stroke of adjustable extension stroke cylinder (-XC8)

Long stroke of adjustable retraction stroke cylinder (-XC9)

Long stroke of dual stroke single rod cylinder

Cylinder tube: With concave boss on head side

Symbol Specifications

• For long strokes exceeding the standard stroke range, refer to page 83.

• For intermediate strokes, refer to page 3.

Bore size

12, 16

20, 25

32, 40

50 to 100

Standard stroke

5, 10, 15, 20, 25, 30

5, 10, 15, 20, 25, 30, 35, 40, 45, 50

5, 10, 15, 20, 25, 30, 35, 40, 45, 50, 75, 100

10, 15, 20, 25, 30, 35, 40, 45, 50, 75, 100

Air-hydro type

Bore size

20, 25

32, 40

50, 63, 80, 100

Standard stroke

5, 10, 15, 20, 25, 30, 35, 40, 45, 50

5, 10, 15, 20, 25, 30, 35, 40, 45, 50, 75, 100

10, 15, 20, 25, 30, 35, 40, 45, 50, 75, 100

Refer to pages 193 to 199 for the specifications

of cylinders with autoswitches.

• Auto switch proper mounting position

(detection at stroke end) and its mounting height

• Minimum stroke for auto switch mounting

• Operating range

• Auto switch mounting brackets/Part no.

Allowable kinetic

energy (J)

0.022

0.043

0.038

0.075

0.055

0.11

0.09

0.18

0.15

0.29

0.26

0.52

Double acting, Single rod

Air

1.5 MPa

1.0 MPa

Not required (Non-lube)

50 to 500 mm/s

0.46

0.91

0.77

1.54

1.36

2.71

2.27

4.54

0.07 MPa 0.05 MPa

Without auto switch: –10 to 70°C (No freezing)

With auto switch: –10 to 60°C (No freezing)

+1.0 mm

Note)

+1.0 mm

Action

Fluid

Proof pressure

Maximum operating pressure

Minimum operating pressure

Ambient and fluid temperature

Piston speed

Cushion

Stroke length tolerance

Air-hydro type

Bore size (mm)

20 25 32 40 50 63 80 100

Note) Refer to “Handling Precautions for SMC Products” (M-E03-3) for Actuator Precautions (5).

Double acting, Single rod

Turbine oil

Note)

1.5 MPa

1.0 MPa

5 to 60C

5 to 50 mm/s

None

0.18 MPa 0.1 MPa

(mm)

Bore size

(mm)

Foot

Note 1)

Model Flange

Without switch

With switch

Without switch

With switch

Without switch

With switch

Without switch

With switch

100

CQ-L012

CQ-LZ12

CQ-L016

CQ-LZ16

CQ-L020

CQ-LZ20

CQ-L025

CQ-LZ25

CQ-L032

CQ-L040

CQ-L050

CQ-L063

CQ-L080

CQ-L100

CQ2

-D

CQ2

-DZ

CQ2-D

CQ2

-DZ

CQ2

-D

CQ2-DZ

CQ2

-D

CQ2-DZ

CQ2

-DZ

CQ2

-DZ

CQ2-DZ

CQ-F012

CQ-F016

CQ-F020

CQ-F025

CQ-F032

CQ-F040

CQ-F050

CQ-F063

CQ-F080

CQ-F100

CQ-D012

CQ-D016

CQ-D020

CQ-D025

CQ-D032

CQ-D040

CQ-D050

CQ-D063

CQ-D080

CQ-D100

Doubleclevis

Note 1) When ordering a foot and compact food brackets, the required quantity will be

different depending on the bore size.

ø12 to ø25:

• Without switch: Order 2 pieces per cylinder.

• With switch: Order 1 piece per cylinder. (Part number for a set of 2 foot brackets)

ø32 to ø100:

• Order 2 pieces per cylinder.

Note 2) Parts belonging to each bracket are as follows.

Foot, Compact foot, Flange: Body mounting bolts

Double clevis: Clevis pin, Type C retaining rings for axis, Body mounting bolts

Note) -XB14: The body shape is the same as the existing

product.

Made to Order

(For details, refer to pages 201 to 235.)

Specifications

Pneumatic type

Standard Strokes

Pneumatic type

Mounting Brackets/Part No.

Symbol

Double acting,

Single rod

Symbol

With boss on

head end

Compact

Foot

Note 1)

CQ-LC012

CQ-LCZ12

CQ-LC016

CQ-LCZ16

CQ-LC020

CQ-LCZ20

CQ-LC025

CQ-LCZ25

CQ-LC032

CQ-LC040

CQ-LC050

CQ-LC063

CQ-LC080

CQ-LC100

Standard

Large Bore

Size

Long Stroke

Non-rotating

Rod

Axial Piping

Anti-lateral

Load

With End Lock

Water

Resistant

Auto SwitchMade to Order

With Auto

Switch

Series CQ2

Compact Cylinder: Standard

Double Acting, Single Rod