Datasheet
(mm)
5, 10, 15, 20, 25, 30
5, 10, 15, 20, 25, 30, 35, 40, 45, 50
5, 10, 15, 20, 25, 30, 35, 40, 45, 50, 75, 100
10, 15, 20, 25, 30, 35, 40, 45, 50, 75, 100
-XA첸
-XB10
-XC2(A)
-X633
Change of rod end shape
Intermediate stroke (Exclusive body type)
Rod end length, 10 mm increased (For foot and flange bracket)
Intermediate stroke of double rod cylinder
Symbol Specifications
∗ -X633: Intermediate stroke in 5 mm intervals only
Made to Order
(For details, refer to pages 201 to 235.)
Symbol
Non-rotating rod,
Double acting
Action
Fluid
Proof pressure
Maximum operating pressure
Minimum operating pressure
Ambient and fluid temperature
Lubrication
Piston speed
Allowable kinetic energy (J)
Stroke length tolerance
Rod non-rotating accuracy
Bore size (mm)
12 16 20 25 32 40 50 63
∗ ø12 with auto switch: With rubber bumper (Standard)
Note 1) For cylinders with rubber bumper (ø12 with auto switch only)
Note 2) Stroke length tolerance does not include the amount of bumper change.
0.022
0.043
Note 1)
0.038 0.055 0.09 0.15 0.26
Double acting, Double rod
Air
1.5 MPa
1.0 MPa
Not required (Non-lube)
50 to 500 mm/s
0.46 0.77
0.07 MPa 0.05 MPa
Without auto switch: –10 to 70°C (No freezing)
With auto switch: –10 to 60°C (No freezing)
±2° ±1° ±0.8°
Specifications
+1.0 mm
0
Note 2)
Standard strokeBore size
12, 16
20, 25
32, 40
50, 63
Standard Strokes
A spacer is installed in the standard stroke body.
Refer to “How to Order” for the standard model number. (P. 108)
Strokes in 5 mm intervals are available by installing a spacer in the
standard stroke cylinder.
Part no.: CQ2KWB50-65DZ
CQ2KWB50-75DZ with 10 mm width spacer inside
The B dimension is 125.5 mm.
Bore size
32 to 63
Stroke range
55 to 95
Type
Part no.
Description
Stroke range
Example
Manufacture of Intermediate Strokes
Bore size (mm)
Mounting
Through-hole (Standard)
Both ends tapped
Built-in magnet
Piping
Pipe thread
Built-in one-touch fittings
Rod end male thread
12
쎲
쎲
M5
쎲
16
쎲
쎲
M5
쎲
20
쎲
쎲
M5
쎲
25
쎲
쎲
M5
쎲
32
쎲
쎲
Note 1)
M5
Rc1/8
쎲
NPT1/8
G1/8
NPT1/8
G1/8
NPT1/4
G1/4
NPT1/4
G1/4
40
쎲
쎲
쎲
Rc1/8
ø6/4
쎲
50
쎲
쎲
쎲
Rc1/4
ø8/6
쎲
63
쎲
쎲
쎲
Rc1/4
ø8/6
쎲
ø6/4
Note 2)
• Auto switch proper mounting position (detection at stroke end) and its mounting height
• Minimum stroke for auto switch mounting
• Operating range
• Auto switch mounting brackets/Part no.
Refer to pages 193 to 199 for the specifications of cylinders with autoswitches.
Note 1) ø32 without auto switch: M5 is used for 5 mm strokepiping dimension.
Thus, do not enter a symbol for the port thread type.
Note 2) The dimensions of the ø32-5 mm stroke with built-in one-touch fittings are the same as those of
the 10 mm stroke cylinder tube.
—
TN
TF
Type
Pneumatic
Series CQ2KW
109