Datasheet

ManualsBrandsSMC ManualsAutomationMultifunction Counter

Connection Method

 Multi-counter

CEU5

Power supply voltage

External output

Nil

RS-232C

RS-232C + BCD

Nil

100 to 240 VAC

24 VDC

Output transistor mode

Nil

NPN open collector output

PNP open collector output

MULTI COUNTER: CEU5

COM

COM COM

12 VDC

GND F.G.

R.S.

HOLD

BANK1 BANK2

COM

S.STOP

OUT1OUT2OUT3

OUT4

OUT5

100 to 240 VAC

COUNT

PRESET

FUNC.

SD SGRD

RS-232C

LEFT

RIGHT

DOWN

SEL.

SET

MODE

MULTI COUNTER: CEU5

COM

COM COM

12 VDC

GND F.G.

R.S.

HOLD

BANK1 BANK2

COM

S.STOP

OUT1OUT2OUT3

OUT4

OUT5

100 to 240 VAC

COUNT

PRESET

FUNC.

RS-232C

LEFT

RIGHT

DOWN

SEL.

SET

MODE

White

Blue

Yellow

Brown

Red

Black

F.G.

BCD

• OUT1 to OUT 5

• OUT1 to OUT20 (Bank switching)

• Binary output (31 points)

RS-232C

High precision stroke reading cylinder

Extension cable

If the distance between high precision stroke reading

cylinder and multi-counter is over 23 meter, use

transmission box. (CE1-H0374)

BCD Connector Specifications

Model (counter side):

DX10M-36S (made by Hirose Electric Co., Ltd.)

Connector model:

DX30AM-36P (made by Hirose Electric Co., Ltd.)

Please consult with SMC separately for a BCD cable

with connector.

Series CEU/Series CE

Counter/Extension Cable

How to Order

10-12-27

REC

CX

CY

RHC

MK(2)

RZQ

CEP1

CE1

CE2

ML2B

5-S

MVGQ

D-

-X

20-

Data

Summary of content (9 pages)

PAGE 1
Series CEU/Series CE Counter/Extension Cable Multi-counter How to Order RE BA CEU5 REC C X Power supply voltage Output transistor mode Nil NPN open collector output P PNP open collector output Nil 100 to 240 VAC D 24 VDC COM A B PRESET COUNT C Y COM 12 VDC GND F.G. R.S. HOLD COM BANK1 BANK2 MULTI COUNTER: CEU5 FUNC. UP LEFT RIGHT MQ MQ SET RHC DOWN External output Nil RS-232C B RS-232C + BCD MODE SEL. 100 to 240 VACCOM OUT1OUT2OUT3OUT4OUT5S.
PAGE 2
Series CEU5 Multi-counter/Specifications CEU5 Model CEU5-D CEU5P CEU5P-D Type CEU5B CEU5B-D CEU5PB CEU5PB-D Multi-counter Mounting Surface mounting (DIN rail or Screw stop) Operating system Adding - subtracting type Operation mode Operating mode, Data setting mode, Function setting mode Reset system External reset terminal Display system LCD (With back light) Number of digits 6 digits Memory holding {Storage medium} Setting value (always held), Count value (Hold/Non-hold switching),
PAGE 3
Counter CEU5 Wiring with External Equipment 1. Wiring of power source for driving counter For power source for driving counter, use the one with 90 to 264 VAC, 50/60 Hz or 21.6 to 264 VDC, 0.4 A or more. 2. Wiring for control signal input (Selection among Reset, Hold, Bank) Make each control signal to be the transistor which can run more than 15 mA or the contact output. Input time for reset signal should be more than 10 ms.
PAGE 4
Series CEU CEU5 Operation Parts description Pulse input terminals A COM B External power supply Control signal input COM 12 VDC GND F.G. R.S. HOLD COM BANK1 BANK2 MULTI COUNTER: CEU5 Display PRESET COUNT FUNC. BCD Output connector (on side) UP RIGHT LEFT DOWN MODE SEL. 100 to 240 VAC COM OUT1 OUT2 OUT3 OUT4 OUT5 S.
PAGE 5
Counter Mode cycle using mode key CEU Basic Operation • SET key 1. Count mode : In any of the conditions (1) through (5), this writes the display data into the memory and shifts to (1). : Shifts to the next item, but does not write data. • SEL. key • MODE key : In any given condition, this shifts to the next mode, but does not write data. • Direction keys : LEFT/RIGHT keys shift the digits, and UP/DOWN keys increase or decrease numerical values. RE BA REC 1.
PAGE 6
Series CEU CEU5 Operation 3. Explanation of settings in the function mode If the UP/DOWN keys are pressed when an item name is flashing , it shifts to another setting item. When the SEL. key is pressed, the cursor shifts and it is possible to change the content of the setting for the item which is being displayed. Item name (1) 3-1 FUNC. Prescale • The prescale setting mode is selected by pressing the SEL. key while PRESCL is flashing. SEL. key (2) FUNC.
PAGE 7
Counter 3-3 DOWN FUNC. CEU FUNC. SEL. key Stop output UP • The setting mode for stand-by time until stop output is commanded is selected by pressing the SEL key while STOP is flashing. • Set numerical values with the direction keys. • The unit is 0.1 sec. • Store the setting with the SET key. • The SEL. key only shifts the cursor without storing the setting. DOWN FUNC. REC FUNC. SEL. key 3-4 RE BA C X Output type C Y UP • The output system setting mode is selected by pressing the SEL.
PAGE 8
Series CE Glossary (Functions of CEU5) BCD Output Bank Function This is a system which expresses one digit of a decimal number with a 4 digit binary number. The count value is expressed by the ON/OFF state of each BCD output terminal. In the case of 6 digits, 24 terminals are required. 5 points of preset output are possible simultaneously, however, a maximum of 20 types of work discrimination, etc.
PAGE 9
Series CE Glossary (Functions of CEU5) Display Offset Function Count Value Protection Normally the count value returns to “0” after resetting, but with this function, the initial value can be set to any desired value. In the past, the count value returned to “0” when the power supply was cut off, but this function holds the previous value even after a power failure. This function can be switched between active and inactive settings.