Datasheet

1. Explanation of display in count mode
2. Setting of preset mode
Selection of preset No.
• Select a preset number from 1 to 31 with the UP/DOWN keys.
• Shift to the next item with the SEL. key.
Setting the preset values
• Shift the digits with the LEFT/RIGHT keys, and increase or
decrease the numerical values with the UP/DOWN keys.
• Shift to the next item with the SEL. key.
Setting the upper limit tolerance
• Set numerical values in the same way with the direction keys.
• When ± is selected, the lower limit display is cleared and ± setting
is possible.
• Shift to the next item with the SEL. key.
Setting the lower limit tolerance
• Set numerical values in the same way with the direction keys.
• When ± is selected in the upper limit setting , this item is not
displayed.
• Shift to the next item with the SEL. key.
Setting the output configuration
• Switch to 1SHOT, HOLD or COMPARE with the UP/DOWN keys.
• Store the setting with the SET key.
• The SEL. key only shifts to another item without storing the setting.
Normal output display Binary output display
Mode cycle using mode key
MODE key
MODE key
MODE key
SEL. key
SEL. key
SEL. key
SEL. key
SET key
Basic Operation
COUNT
BANK
1SHOT
NO.
PRESET
Displays current output bank
Displays output state of each OUT terminal
COUNT
NO.
Displays only when matched with preset
Display of binary output selection.
NO.
PRESET
1SHOT
NO.
PRESET
1SHOT
NO.
PRESET
1SHOT
NO.
PRESET
(1)
(2)
(3)
(4)
(5)
COMPARE
1. Count mode
2. Preset mode
3. Function mode
• SET key : In any of the conditions (1) through (5), this writes the display
data into the memory and shifts to (1).
• SEL. key
: Shifts to the next item, but does not write data.
• MODE key : In any given condition, this shifts to the next mode, but does
not write data.
• Direction keys : LEFT/RIGHT keys shift the digits, and UP/DOWN keys
increase or decrease numerical values.
Counter CEU
10-12-35
RE
A
B
REC
CX
CY
MQ
Q
M
RHC
MK(2)
RS
Q
G
RS
H
A
RZQ
MI
W
S
CEP1
CE1
CE2
ML2B
C
J
G
5-S
CV
MVGQ
CC
RB
J
D-
-X
20-
Data