Datasheet

3. Explanation of settings in the function mode
• The prescale setting mode is selected by pressing the SEL. key while
PRESCL is flashing.
Selection of connected model
• Select CEP1, CE1 or manual with the UP/DOWN keys.
• Select CEP1, CE1: Store the setting with the SET key and return to (1).
• Select manual: Shifts to the next item when the SEL. key is pressed.
Setting the multiplication function
• Select x1, x2 or x4 with the UP/DOWN keys.
x4 indicates multiplication by 4.
• Shift to the next item with the SEL. key.
Setting the prescale value
• Set the number to be added for each count.
• Shift the digits with the LEFT/RIGHT keys, and increase or decrease
the numerical values with the UP/DOWN keys.
• Shift to the next item with the SEL. key.
Setting the decimal point position
• Shift the position of the decimal point with the LEFT/RIGHT keys.
• Store the setting with the SET key.
• The SEL. key only shifts the cursor without storing the setting.
• The offset setting mode is selected by pressing the
SEL. key while OFFSET is flashing.
• Set numerical values with the direction keys.
• Store the setting with the SET key.
• The SEL. key only shifts the cursor without storing
the setting.
Offset
Prescale
UP
UP
DOWN
SEL. key
SEL. key
SEL. key
SEL. key
SET key
SEL. key
FUNC.
FUNC.
CEU5 Operation
3-1
3-2
FUNC.
FUNC.
FUNC.
FUNC.
FUNC.
(1)
(2)
(3)
(4)
(5)
Item name
If the UP/DOWN keys are pressed when an item name is flashing , it shifts to another setting item. When the SEL. key is pressed,
the cursor shifts and it is possible to change the content of the setting for the item which is being displayed.
Series CEU
10-12-36