Datasheet

• The setting mode for stand-by time until stop output
is commanded is selected by pressing the SEL key
while STOP is flashing.
• Set numerical values with the direction keys.
• The unit is 0.1 sec.
• Store the setting with the SET key.
The SEL. key only shifts the cursor without storing the setting.
RS-232C
Unit no.
Stop output
UP
DOWN
UP
DOWN
DOWN
UP
DOWN
UP
DOWN
UP
DOWN
SEL. key
FUNC.
3-3
Output type
3-4
3-5
Count value backup
3-6
3-7
3-8
FUNC.
• The output system setting mode is selected by
pressing the SEL. key while OUTPUT is flashing.
Select normal output or binary output with the UP/DOWN keys.
• Store the setting with the SET key.
The SEL. key only shifts the cursor without storing the setting.
SEL. key
FUNC. FUNC.
• The input type setting mode is selected by pressing
the SEL. key while INPUT is flashing.
• Select phase difference input with the UP/DOWN keys.
(2PHASE) or separate input (UP/DOWN) with the UP/
DOWN keys.
• Store the setting with the SET key.
The SEL. key only shifts the cursor without storing the setting.
SEL. key
FUNC. FUNC.
• The count value backup setting mode is selected by
pressing the SEL. key while BACKUP is flashing.
• Select ON or OFF with the UP/DOWN keys.
• Store the setting with the SET key.
The SEL. key only shifts the cursor without storing the setting.
SEL. key
FUNC. FUNC.
• The RS-232C communication speed setting mode is
selected by pressing the SEL. key while RS-232 is
flashing.
• Select the communication speed from 1200, 2400, 4800,
9600 or 19200 with the UP/DOWN keys.
• Store the setting with the SET key.
The SEL. key only shifts the cursor without storing the setting.
SEL. key
FUNC. FUNC.
• The unit number registration mode is selected by
pressing the SEL. key while UNIT is flashing.
• Set numerical values with the direction keys.
• Settings can be made from 00 to 99.
• Store the setting with the SET key.
SEL. key
FUNC. FUNC.
Input type
Counter CEU
10-12-37
RE
A
B
REC
CX
CY
MQ
Q
M
RHC
MK(2)
RS
Q
G
RS
H
A
RZQ
MI
W
S
CEP1
CE1
CE2
ML2B
C
J
G
5-S
CV
MVGQ
CC
RB
J
D-
-X
20-
Data