Datasheet

2
Cold Resistant Cylinder (−40 to 70°C)
-XB7
Symbol
Note 1) Operate without lubrication from a pneumatic system lubricator.
Note 2) Use dry air which is suitable for heatless air dryer etc. not to cause
the moisture to be frozen.
Note 3) Please contact SMC for details on the maintenance intervals for this
cylinder, which differ from those of the standard cylinder.
Note 4) Mounting auto switch is impossible.
Note 5) Without a bumper.
Piston speed is ranged from 50 to 500 mm/s.
Note) Operate without lubrication from a pneumatic system lubricator.
Air cylinder which changed the seal material and grease, so that it could be used even at lower temperature down to −40°C.
1
Heat Resistant Cylinder (–10 to 150°C)
-XB6
Symbol
Note 1) Operate without lubrication from a pneumatic system lubricator.
Note 2) Please contact SMC for details on the maintenance intervals for this
cylinder, which differ from those of the standard cylinder.
Note 3) In principle, it is impossible to make built-in magnet type and the one
with auto switch. But, as for the one with auto switch, and the heat
resistant cylinder with heat resistant auto switch, please contact SMC.
Note 4) Piston speed is ranged from 50 to 500 mm/s.
Air cylinder which changed the seal material and grease, so that it could be used even at higher temperature up to 150 from −10°C.
Applicable Series
Series Description Model Action Note
CG1-Z
Standard
type
CG1
Double acting,
Single rod
Except with auto switch.
Cylinders with rubber bumper
have no bumper.
Applicable Series
Series Description Model Action Note
CG1-Z
Standard
type
CG1
Double acting,
Single rod
Except with air cushion and auto
switch. Cylinders with rubber
bumper have no bumper.
Applicable Series
Series Description Model Action Note
CG1-Z
Standard
type
CG1
Double acting,
Single rod
Except with rod boot
and with air cushion
Specifi cations
Ambient temperature range −10°C to 150°C
Seals materials Fluororubber
Grease Heat resistant grease
Specifi cations other than above
and external dimensions
Same as standard type
Specifi cations
Piston speed 10 to 50 mm/s
Dimensions Same as standard type
Additional specifi cations Same as standard type
Specifi cations
Ambient temperature range −40°C to 70°C
Seals material Low nitrile rubber
Grease Cold resistant grease
Auto switch Not mountable
Dimensions Same as standard type
Additional specifi cations Same as standard type
Heat resistant cylinder
How to Order
Standard model no.
XB6
Cold resistant cylinder
How to Order
Standard model no.
XB7
Low speed cylinder
How to Order
Standard model no.
XB9
3
Low Speed Cylinder (10 to 50 mm/s)
-XB9
Symbol
Even if driving at lower speeds 10 to 50 mm/s, there would be no stick-slip phenomenon and it can run smoothly.
Precautions
Be aware that smoking cigarettes etc. after your hands have come into
contact with the grease used in this cylinder can create a gas that is
hazardous to humans.
Warning
Precautions
Be aware that smoking cigarettes etc. after your hands have come into
contact with the grease used in this cylinder can create a gas that is
hazardous to humans.
Warning
Precautions
Be aware that smoking cigarettes etc. after your hands have come into
contact with the grease used in this cylinder can create a gas that is
hazardous to humans.
Warning
Series CG1
Made to Order
Please contact SMC for detailed dimensions, specifi cations and lead times.
53