Datasheet

øI2
M
FA
ZZ
+ Stroke
Scraper bracket
mounting bolt
H
Specifi cations: Same as standard type
16
Double Knuckle Joint with Spring Pin
-XC29
Symbol
Specifi cations: Same as standard type
Dimensions: Same as standard type
For prevent loosening of the double knuckle joint
Applicable Series
Series Description Model Action
CG1-Z
Standard type CG1 Double acting, Single rod
-XC35
Symbol
17
With Coil Scraper
It gets rid of frost, ice, weld spatter, cutting chips adhered to the piston rod, and protects the seals etc.
Double knuckle joint with spring pin
How to Order
Standard model no.
XC29
With coil scraper
How to Order
Standard model no.
XC35
Larger throttle diameter of connection port
How to Order
Standard model no.
XC37
Applicable Series
Series Description Model Action Note
CG1-Z
Standard type CG1 Double acting, Single rod Except with air cushion
Applicable Series
Series Description Model Action Note
CG1-Z
Standard type CG1 Double acting, Single rod
Except with air cushion
∗ Except ø80, 100
Double rod type CG1W Double acting, Double rod
Note) ( ): Long stroke
∗ Other dimensions are the same as double acting, single rod, standard type.
∗ On the axial foot and the rod fl ange types, the installation bracket is wedged
and bolted between the cylinder and the scraper at the time of shipment.
On other types, it is placed in the same package, (but not assembled).
∗ The long stroke shows the maximum manufacturable stroke. For details
about maximum stroke that can be used for each mounting bracket, contact
SMC.
Bore size
Stroke range
FA H I2 MZZ
Standard Long stroke
20
Up to 200 201 to 1500 6 39 27 4 110 (118)
25
Up to 300 301 to 1500 6 44 32 5 115 (123)
32
Up to 300 301 to 1500 6 44 38 5 117 (125)
40
Up to 300 301 to 1500 7 54 48 6 134 (143)
50
Up to 300 301 to 1500 7 62 59 8 154 (166)
63
Up to 300 301 to 1500 7 62 72 10 154 (166)
[mm]
18
Larger Throttle Diameter of Connection Port
-XC37
Symbol
Dimensions (Throttle diameter of connection port)
Dimensions other than below
are the same as standard type.
Specifi cations: Same as standard type
This is a cylinder with a piping port larger than the standard type.
[mm]
∗ Use external stopper etc. not to be damaged
with cylinder cover directly if exceeding the
range of kinetic energy absorption.
Bore size With rubber bumper Standard type
20
5 (2.1)
25
5 (2.5)
32
6 (3.3)
40
7 (3.9)
50
9 (4.5)
63
9 (5.7)
Dimensions
(Dimensions other than below are the same as standard type.)
63
Series CG1