Installation guide

– 119 –
22 PORT STATISTICS
You can display standard statistics on network traffic passing through each
port. This information can be used to identify potential problems with the
switch (such as a faulty port or unusually heavy loading).
All values displayed have been accumulated since the last system reboot.
PARAMETERS
The following parameters are displayed on the Port Statistics Information
page:
◆ Port — The port number.
◆ State — Displays the link state of port interfaces (Enabled or Disabled).
◆ Link Status — Displays the link state of the port interface (Link Up or
Link Down).
◆ TxGoodPkt — The total number of packets transmitted out of the
interface.
◆ TxBadPkt — The total number of outbound packets that could not be
transmitted because of errors.
◆ RxGoodPkt — The total number of packets received on the interface.
◆ RxBadPkt — The total number of inbound packets that contained
errors preventing them from being deliverable.
◆ Clear — Click the button to reset all counters.