Datasheet

Pressure gauge with limit indicator / Colour zone type
Series G36-L, G46-L
Note 1) When mounting a pressure gauge, use caution not to tighten excessively. Excessive tightening will cause the product to be damaged.
Use a pipe tape for sealing.
Recommended tightening torque: R1/8: Set between 7 and 9
N · m, R1/4: 12 and 14 N · m respectively.
Note 2) When using other fluids, please consult SMC for compatibility information concerning corrosion etc.
Note 3) At 20
°C ±5°C. At any other temperature ±6% F.S.
Model
G36-L G46-L
Type
Connection thread
Note 1)
Fluid
Note 2)
Indication precision
Material
Weight (kg)
Case
(Surface treatment)
Clear cover
Socket
Bourdon’s tube
Back side thread
Air
± 3% F.S. (Full span)
Note 3)
Brass
R1/8 R1/8, R1/4
0.04 0.05
Rolled steel plate
(Black melamine coating)
Brass
Polycarbonate (Part no.: G36-00-00-3)
Nylon (Part no.: G36-00-00-3N)
Polycarbonate (Part no.: G46-00-00-3)
Nylon (Part no.: G46-00-00-3N)
Standard Specifications
Note) Do not apply more pressure than the max. pressure display. It will be a cause of malfunction.
Model
Pressure range
Note)
MPa
Indication
unit
Connection
thread
Note
MPa
R1/8
R1/8, 1/4
—
G36-2-01-L
G36-4-01-L
G36-10-01-L
G46-2-01 to 02-L
G46-4-01 to 02-L
G46-10-01 to 02-L
0 to 0.2
0 to 0.4
0 to 1.0
0 to 0.2
0 to 0.4
0 to 1.0
Min. setting range MPa
0.01
0.02
0.05
0.01
0.02
0.05
Max. setting range MPa
0.1
0.2
0.5
0.1
0.2
0.5
Model (Standard)
Note 1) Do not apply more pressure than the max. pressure display. It will be a cause of malfunction.
Note 2) This will no longer be sold for use in Japan after the new Weight and Measure Act is implemented. (Only SI units are used for the Japanese market.)
Model
Pressure range
Note 1)
Green zone setting range
Green zone setting range
MPa psi
Indication
unit
Connection
thread
Note
MPa, psi
R1/8
R1/8, 1/4
—
G36-P2-01-L-X30
G36-P4-01-L-X30
G36-P10-01-L-X30
G46-P2-01 to 02-L-X30
G46-P4-01 to 02-L-X30
G46-P10-01 to 02-L-X30
0 to 0.2
0 to 0.4
0 to 1.0
0 to 0.2
0 to 0.4
0 to 1.0
Min. setting range MPa (psi)
0.01 (2)
0.02 (4)
0.05 (10)
0.01 (2)
0.02 (4)
0.05 (10)
Max. setting range MPa (psi)
0.1 (14)
0.2 (28)
0.5 (70)
0.1 (14)
0.2 (28)
0.5 (70)
0 to 30
0 to 60
0 to 150
0 to 30
0 to 60
0 to 150
Model (Made to Order)
The indicator adjusts to highlight preferred range
Green indicator
Red indicator
Information
G36-10-01-L G46-10-02-L
 Red and green zones offer improved visibility
of pressure control range.
SMC Corporation
Akihabara UDX 15F,
4-14-1, Sotokanda, Chiyoda-ku,
Tokyo 101-0021, JAPAN
URL http://www.smcworld.com
©2008 SMC Corporation All rights reserved.
07-EU538-UK
D-KS Printing MP 13500KS
1