Datasheet

Series ZSE80/ISE80
Specific Product Precautions 2
Be sure to read before handling. Refer to front matters 58 and 59 for Safety Instructions
and pages 687 to 691 for Pressure Switch Precautions.
Caution
Set Pressure Range and Rated Pressure Range
Set the pressure within the rated pressure range.
The set pressure range is the range of pressure that is possible in setting.
The rated pressure range is the range of pressure that satisfies the specifications (accuracy, linearity, etc.) on the switch.
Although it is possible to set a value outside the rated pressure range, the specifications will not be guaranteed even if the value stays within
the set pressure range.
Switch
–100 kPa 0 100 kPa 1 MPa 2 MPa
Pressure range
For compound
pressure
For positive
pressure
ZSE80F
ISE80
–100 kPa
–0.1 MPa
–110 kPa
100 kPa
110 kPa
For vacuum
pressure
ZSE80
–101 kPa
–111 kPa
0
10 kPa
1 MPa
–0.105 MPa 1.1 MPa
ISE80H
Rated pressure range of switch
Set pressure range of switch
2 MPa
–0.105 MPa
–0.1 MPa
2.2 MPa
1. Mounting with panel mount adapter
2. Mounting with brackets
Mount a bracket to the using two M3 x 5L mounting screws and install on piping. The switch can be installed horizontally depending
on the installation location.
Caution
Mounting
The tightening torque for bracket mounting
screw should be 0.98 N·m or less.
Panel
Front protection cover (Option)
Panel mount
adapter A
Panel mount
adapter B
Panel
Front protection cover (Option)
Panel mount
adapter A
Panel mount
adapter B
Mounting screw M3 x 5L
Bracket A
Mounting screw M3 x 5L
Bracket B
745
ZSP
PS
ISA
PSE
IS
ISG
ZSM
ZSE
ISE
P0694-P0755-E.qxd 08.8.27 6:30 PM Page 745